|
| 1 | Providing and fixing of GREEN NET as per the requirement of the standard size and as per direction of Engineer-in-charge. |
| 2 | Normal 2D WALL Painting with good quality paint as per engg.in charge (Including of GST ) also including preparation of surface and BASE ETC. |
| 3 | WRITING WORK with WALL good quality paint as per engg.in charge (Including of GST ) also including preparation of surface and BASE ETC. |
| 4 | 3D WALL Painting with good quality paint as per engg.in charge (Including of GST ) also including preparation of surface and BASE ETC. |
| 5 | Demolishing cement concrete manually/by mechanical meansincluding disposal of material within 50 meters lead as per direction of Engineer-in-charge.1:3:6 or richer mix. |
| 6 | Dismantling stone slab flooring laid in cement mortar includingstacking of serviceable material and disposal of unserviceablematerial within 50 meters lead. |
| 7 | Dismantling tile work in floors and roofs laid in cement mortarincluding stacking material within 50 meters lead.For thickness of tiles above 25 mm and up to 40 mm |
| 8 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 meters lead as per direction of Engineer-in-In cement mortar |
| 9 | Earth work in excavation for foundation, trenches forpipes / cables or drains etc. by mechanical means /manual means (exceeding 30cm in depth.) includingramming of bottom, dressing of sides, disposal of excavatedearth including of all lift and lead upto 50m. Disposed earthto be levelled and neatly dressed |
| 10 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering All work up to plinthlevel.Cement concrete grade M-10 (Nominal Mix) with 20 mm maximumsize of stone aggregate |
| 11 | Providing and fixing 40mm thick red stone slab over drains including Pointing in cement mortar 1:3 (1 cement : 3 sand) |
| 12 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in and colours laid on 20mm thick cement mortar1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 13 | Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in all colours, laid on 12 mm thick Cement Mortar1:3 (1 Cement : 3 Coarse sand) including grauting the joints with white cement and matching pigments etc., complete. |
| 14 | Providing and fixing white vitreous china water closet squattingpan (Indian type) P or S trap, complete including cutting andmaking good the walls and floors wherever required :Orissa pattern W.C. pan of size 580x440 mm |
| 15 | Providing and fixing controlled flush, low level cistern made ofvitreous china with all fittings complete.10 litre (full flush) capacity-white |
| 16 | Providing and fixing white vitreous china wash basin includingmaking all connections but excluding the cost of fittings :Flat back wash basin of size 550x400mm. |
| 17 | Providing and placing on terrace at all floor polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 18 | Providing and fixing white vitreous china squatting plate urinalwith integral rim longitudinal flush pipe. |
| 19 | Providing and fixing white vitreous china flat back or wall cornertype lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. |
| 20 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 21 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:Two or more coats on new work |
| 22 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works. |
| 23 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 24 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 25 | Providing and fixing stainless steel ( Grade 304) railing made ofHollow tubes, channels, plates etc. including welding, grinding,buffing, polishing and making curvature (wherever required) andfitting the same with necessary stainless steel nuts and boltscomplete i/c fixing the railing with necessary accessories and stainlesssteel dash fasteners , stainless steel bolts etc., of required size, onthe top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge. |
| 26 | Brick work will well burnt open bhatta bricks crushing strength not less than 25kg/cm² and water absoption not more than 20% in above plinth levelupto floor two level in cm 1:6 including the cost of scaffholding etc. |
| 27 | 12 mm cement plaster of mix :1:4 (1 cement: 4 sand) |
| 28 | 15 mm cement plaster on rough side of single or half brick wall of mix.1:4 (1 cement: 4 sand) |
| 29 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.Mild steel and Medium Tensile steel bars. |
| 30 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate. |
| 31 | Providing and fixing C.P. brass chain and rubber plug complete forsink or wash basin :32mm dia |
| 32 | 25 mm nominal outer dia .Pipes. |
| 33 | 32 mm nominal outer dia .Pipes. |
| 34 | 40 mm nominal outer dia .Pipes. |
| 35 | Centering and shuttering including strutting, propping stretching etc.complete for and removal of form work by sheet plate or ply woodshuttering for :Foundations, footings, bases of columns, etc. For mass concrete. |
| 36 | 75mm diameter |
| 37 | 110mm diameter |
| 38 | Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98mm long. Weighing not less than 75 gms |
| 39 | Distempering with 1st quality acrylic distemper (ready mixed) ofapproved manufacturer, of required shade and colour complete, as permanufacturer's specification.Two or more coats on new work |
| 40 | Providing & fixing UV stabilised fiberglass reinforced plasticsheet roofing up to any pitch including fixing with polymer coated'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washerscomplete but excluding the cost of purlins, rafters, trusses etc. Thesheets shall be manufactured out of 2400 TEX panel rovigsincorporating minimum 0.3% Ultra-violet stabiliser in resin systemunder approximately 2400 psi and hot cured. They shall be ofuniform pigmentation and thickness without air pockets and shallconform to IS 10192 and IS 12866.The sheets shall be opaque ortranslucent, clear or pigmented, textured or smooth as specified.2mm thick flat. |
| 41 | Steel work in built up M.S. tubular section (round, square orrectangular Hollow tube etc.) trusses/frame work etc./ railing work etc.including cutting, hoisting fixing in position and applying a priming coatof approved steel primer, welded and bolted including special shapedwashers etc. complete. Hot finished welded type tubes Please Enable Macros to View BoQ information |
