|
| 1 | Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 2 | Material and labour for brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6m mean radius, built in cement mortat 1:6, complete all as specified.and directed. |
| 3 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified and directed. |
| 4 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, upto 7th floor of bldg.,complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick pre polymer modified ready mixed cement based plaster in two coats 10 mm thick base coat and 5 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior damaged and concrete/masonary surfaces complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer complete all as specified and directed. |
| 7 | M&L for madrasi dana plaster on exterior walls in two layers, under and including layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. |
| 8 | Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate ) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating all as specified and directed. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | M&L Gravel filling in floor/pavings, deposited, spread andl evelled in layers not exc. 15 cm thick, watered and well rammed to a true surface, complete all as specified and as directed. |
| 11 | M&L for PCC 100 mm thick type D-2 (1:4:8) using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed. |
| 12 | M&L for PCC 100 mm thick type B-2 (1:2:4) using 40mm graded crushed stone aggregate as in hard standingfinished surface fair with out using extra cement complete all as specified and directed. |
| 13 | M&L for forming Construction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound joint 30 mm deep X 10 mm wide filled with sealing compound, Grade 'A'.complete all as specified and directed. |
| 14 | M&L PCC mix type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) string course , kerb, coping, bands cills etcfinished even and smooth without using extra cement in copings complete all as specified and directed. |
| 15 | Cleaning/de-silting of lose mud, rubish etc from drain bed including uprooting of vegetation growth thoroughly and wire brushing including flushing with water so as to achive smooth flow of water in drain and removing rubish outside MD land and depositing in ow laying area complete all as directed by Engr in charge. |
| 16 | M&L cleaning the existing drainage/culvert including removing cover slab, soils,spoils, vegetation, silt etc and refixing cover slab including making good and removing waste materials outside MD Land complete all as directed by EIC. |
| 17 | Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed |
| 18 | M&L for 18-20mm thick granite stone slab of machine cut mirror polished in flooring , bedded and jointed with grey cementpaste and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 19 | M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape and size as approved by GE confirming to IS 15658-2006 of 60mm thickness, M- 35 Grade of with grey cement and pigments and removing old paver blocks complete all as specified and directed. |
| 20 | M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade of with grey cement and pigments removing old paver blocks complete all as specified and directed. |
| 21 | Sand filling 25 mm under floors or in foundations including watering and consolidation laid over including compaction by means of surface vibrator complete all as specified and directed. |
| 22 | M&L chequered cement concrete coloured rouber moulded (Terracota Red) Tiles 200x200x25mm thick, set and jointed in neat cement slurry in floors and pointed in grey cement and pigment, laid over and including 15mm thick cement screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 23 | Taking down interlocking paver from the existing surfaces and refixing them in same place after filling depression with fine sand and re-laid the pavers over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified. |
| 24 | Demolition of cement concrete as in ground floors and in paving n. exc 15cm thick above ground floors complete all as specified and directed. |
| 25 | M L Plain cement concrete 1:3:6 Type C1 using (20mm graded stone aggregate ) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed |
| 26 | Providing and applying double layer with Chowgule Koster dachflex super crack sealer for repairing the cracks of the external wall areas. MAKE: AS approved |
| 27 | M&L preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% on external surface as per manufaturer instruction complete as specified and directed by Engineer-in- charge. |
| 28 | M&L for preparation of old wall/ ceiling surfaces and applying two coat of leekage / seepage resistant chemical with necessary scaffolding for G+9 bldgs etc all as specified and as directed by Engr in-Charge.Note : Applying second coat after 24 hours or prescribed by the manufacturer instruction. Make : Asian Paint( Smart Care damp block 2K / Smart Care Hydro Loc), Dr Fixit, Berger or Techno commercial equivalant as approved. |
| 29 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 30 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including ornamental and intricate design conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 31 | M&L for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each complete all as specified and directed. |
| 32 | M& L for Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 33 | M&L for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over acoat of red oxide primer complete all as specified and directed. |
| 34 | S&F in repairs for RCC precast drain covers of size 600 x 900mm, factory made Make : As approved complete all as specified & directed . |
| 35 | S&F in repairs for RCC precast drain covers of size 450 x 900mm, factory made Make : As approved complete all as specified & directed . |
| 36 | Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for complete all as specified and directed. |
| 37 | M&L for RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, walls deck slabs in shelves and the like all as specified. |
| 38 | M&L Mild steel TMT bars 10mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-O or Fe 310-O complete all as specified and directed. |
| 39 | M&L Mild steel TMT bars 6 to 8mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 410-O or Fe 310-O complete all as specified and directed. |
| 40 | Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc r also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and directed . |
| 41 | Formwork to sides of pillars posts, struts, piers, walls, columns and stanchions square, rectangular or polygonal.rough finished surface of concrete. Complete all as specified and directed. |
| 42 | Dismantling of fencing, wire mesh of any type, and in any position by unscrewing nuts, fillets, clamps .rough finished surface of concrete. Complete all as specified and directed. |
| 43 | Supply only chain link MS galvanised fencing of size 100 x 100 mm mesh and 10 mm gauge complete all as specified and directed . |
| 44 | Fixing only chain link MS fencing including line wires, any mesh , size and type to any type of standards, rails, strainging bolts etc including provision of binding wire all as specified and directed . |
| 45 | S&F in repairs galavanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specifed (each line wire to be measured) complete all as specified and directed . |
| 46 | S & F in repairs barbed razor type concertina coil, 9SWG hot galvanized spring tensile wire of UTS 145 to 150 N/Sqm, zinc coating 250 to 300 gms/Sqm, dia of coil when un streched shall be 600 mm having minimum of coil (GI strip) 1.625 Kg/RM , hot dip galvanized razor ribbon tape of size .50 mm thickness, 19 mm wide before wrapping on central core wire fixed with 1.66 mm thick GI clips (minimum 25 Nos /RM ) and special nut and bolts to hold two coils together and extra rows paralled wire of 10 gauhe complete all as specified and as directed. |
| 47 | Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed. |
| 48 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed. |
| 49 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed. |
| 50 | Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm bore pipe complete all as specified and directed . . |
| 51 | S &F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with dash throgh fastners and rain water bracket suitable for 160 mm bore pipe spacing 1.5 m c/c as per CE (Navy) mumbai drg No TD/2023/01 or laid in floor complete all as specified and directed. complete including ss clamping , scafolding etc all as specified and directed. |
| 52 | S &F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with dash throgh fastners and rain water bracket suitable for 160 mm bore pipe spacing 1.5 m c/c as per CE (Navy) mumbai drg No TD/2023/01 or laid in floor complete all as specified and directed. complete including ss clamping , scafolding etc all as specified and directed. |
| 53 | S&F PVC (SWR) bends/ shoes of 110 mm bore fixed in any position complete all aspecified and directed. |
| 54 | S&F PVC (SWR) bends of 75 mm bore fixed in any position complete all aspecified and directed. |
| 55 | S&F PVC (SWR) bends provided with access door of 110 mm bore complete all as specified and directed |
| 56 | S&F PVC (SWR) bends provided with access door of 75 mm bore complete all as specified and directed |
| 57 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm bore with access door complete all as specified and directed |
| 58 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm bore with access door complete all as specified and directed |
| 59 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish as per SSR Part I complete all as specified and directed. |
| 60 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Engineer-in-Charge. Design for stairs/ladders or any others will be as approved by GE. |
| 61 | M &L for preparation of plastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent, salts and trading oil greasy spots and applying one coat of cement base paint over a coat of primer on walls complete all as specified and directed. |
| 62 | M &L for preparation of old previously treated steel surface of any description not other wise described over 10 cm in width or girth and applying one coat of synthetic enamel paint in existing pattern complete all as specified and directed. |
| 63 | M & L for preparation of old previously treated surface of wood and wood based surfaces of any description not other wise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 64 | Removing demolished material & debris exc. 1.50 Km but n exc. 5 Km and depositing where directed, complete all as specified and directed . Please Enable Macros to View BoQ information |
