|
| 1 | M&L for excavating over areas, n exc 1.5m deep and getting out in hard/dense soil including Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed. |
| 2 | Removing excavated soil to a distance n exc 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 3 | Rolling and consolidating formation surfaces (in cutting) with power roller exc 8 tonne and n exc 12 tonne complete all as specified and as directed |
| 4 | M&L for laying and compacting 150 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade I as specified Table 400-1 of MoRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required. The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013 complete all as specified and directed |
| 5 | M&L for plain cement concrete 1:4:8, type D2 using 40 mm graded crushed stone aggregate filling and mass concrete in foundation complete all as specified and as directed |
| 6 | Providing and laying 80mm thick factorymade chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as spd and as directed |
| 7 | M&L for providing, cement concrete 1:3:6 C1 1(20mm crushed stone aggregate ) in coping , sides of path etc complete all as specified and directed |
| 8 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400sqm and exc 50mm and n exc 100mm deep complete all as specified and directed |
| 9 | Applying evenly a priming/tack coat with paving bitumen primer at 10Kg/10 Sqm using paving bitumen Grade VG 10 with mechanical sprayer complete all as specified and directed |
| 10 | M&L for premix bituminous macadam using paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and as directed |
| 11 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified & directed |
| 12 | Applying evenly a priming/tack coat with paving bitumen primer at 5Kg/10 Sqm using paving bitumen Grade VG 10 with mechanical sprayer complete all as specified & directed |
| 13 | M&L for bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content as in semi dense asphaltic concrete by weight of total mix, rolled and compacted to required camber and gradient using paving bitumen complete (Using mechanical Paver) |
| 14 | M&L for painting lines, dashes, letters etc on roads pavements and the like 10 cm wide or more with thermoplastic material to standard temperature and with gas and laying standard thickness of 2mm using thermoplastic @ 6.50 kg/Sqm and glass bids @ 250gm/sqm including cleaning the surface complete all as specified. |
| 15 | Repair to pot holes n exc 1sqm each incl sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc, cutting around edges to tleast 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)complete all as specified and directed |
| 16 | S&F cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model no. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions |
| 17 | S&F Road safety Convex mirror 800mm dia incl. Stand Code No. OS-790 including excavation , foundation (0.45x0.45x0.6m) filling PCC 1:3:6 (20mm graded stone aggregate) & removal of soil complete all as specified & directed. |
| 18 | S&F metal round/rectangular pipe delineators made out of ABS body with reflective tape code no OS 800 including excavation , embedding in PCC 1:2:4 (300x300x450mm) type B1& removal of soil complete all as specified & directed |
| 19 | S&F retro reflectorised type sign boards of size 450x600/600x900 rectangle etc sign made of encapsulated lens type of reflective sheeting fixed over aluminum sheeting 2mm thick on SS frame as per size required of hollow square pipe 35x35mm incl vertical hollow SS square pipe of 60x60mm medium wgt,3 mm thick having 2.60m total hgt (2.1m from GL to bottom of sign board and 0.5m below GL embedded in concrete ) incl excavation in post holes in hard dense soil,filling of mass concrete type C2 1:3:6 using 20mm graded agg in Fdn (0.4x0.4x0.6m) & removal of soil complete all as specified and directed |
| 20 | M&L for walling of random rubble, uncoursed, well bonded, in CM 1:6 in retaining walls, abutments and similar work complete all as spd and directed. |
| 21 | M&L for flush pointing to random rubble masonry, uncoursed or brought upto courses in CM 1:4 complete all as spd and directed. Please Enable Macros to View BoQ information |
