|
| 1 | Providing of decorative pole made of mild steel with a total height of 5 mtr above ground level with single arm bracket. The base plate of the pole shall be of size 350x350x12mm. Pole bottom base section shall be 220x220mm, length 1500mm, 4mm thickness with predesigned laser cut to illuminate the surroundings in 20W with noticeable mode, next section pole of diameter 76x5500x3mm with single arm bracket of 1mtr to hold the street light fixture. Provision for inside termination box with 4 way connector & 01 No. 6 Amp MCB for local isolation. The pole is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole should be suitable for outdoor lighting application, including foundation bolts and fastener complete in all respect. As per AOR Attached with 03 year maintenance & warranty on manufacturing. Techinical Specification (GTP) to be Approved by Ell as per drawing attached. |
| 2 | Supply and fixing of LED 90 watt Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 66 Protection complete in all respect.UPPWD 1423 (Bajaj, Crompton, Philips, Wipro make) |
| 3 | Strengthening of ST/Octogonal pole/High Mast/Panel, foundation by providing new concreting including broken of weak foundation, excavation below upto Ground level, Surface finishing and painting with white cement and dark yellow colour cost of all material men and T&P complete in all respect. |
| 4 | Supply and fixing 25 A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering insteument & instrument box with CTs etc. complete in all respect. (with labour) |
| 5 | Supplying and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V on serface the cable run shall be fixed on ms clamps etc of suitable size or as directed by the e.i. grade at a complete in all respects cable laying in existing pipe. (Havells/Polycab/Grandley) |
| 6 | Supply & Laying of 63 mm DWC/HDPE pipe ISI marked along with all accessories like socket, bend, couple etc. confirming to IS 14930 Part Il complete with fitting and cutting jointing etc direct in grownd 75 cm below ground level including excavition and refilling the trench but excluding sand cushining and protective covering etc. |
| 7 | Supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for PVC insulated cable complete in all respect. |
| 8 | Supply & fixing of 16 sq. mm size pin or plan type copper tin plated socket/lug to cable leads with insulated tape and making connection to point complete in all respect. 8 nos each pannel |
| 9 | Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with Gl fitting including material, labour and T&P as per UPSIDC Sch item No. 25A. 1(LS 3.0 mtr for each HM) |
| 10 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr, from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing UPPWD Sch. No. 701 |
| 11 | Supply and laying of 32mm x6mm G.I. earth strip from earth electroded directly in the ground level as required on surface or in recess including cost of Gl saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. (5M for each) |
| 12 | Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.The Borad Should be installed within 15 day of signing of Contract Boand.) Please Enable Macros to View BoQ information |
