|
| 1 | CIVIL PORTION OF WORK:-Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lift. complete as directed by the E.I.C.(A) Compound Wall |
| 2 | (B) Gate and Security Room |
| 3 | (C) Approach Road |
| 4 | (D) Boundary Pillar |
| 5 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not Exceeding 23 cm .in depth with all lead and lift including cost, Conveyance, Loading, unloading, Royalties and taxes of all materials, cost of all labour. labour cess, sundries, T&P required for work etc .complete in all respect as per direction by the Engineer in charge.(i) Ground Floor |
| 6 | (B) Gate and Security Room |
| 7 | (C) Approach Road |
| 8 | (D) Boundary Pillar |
| 9 | Cement Concrete of prop.(1:3:6) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hosting, lowering, laying compacting concrete in layers not exceeding 6\\"thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty & taxes of all materials, with labour T&P required for the work etc. complete in all respects including dewatering if required as per direction of engineer-in -charge.(i) Ground Floor |
| 10 | (B) Gate and Security Room |
| 11 | Plain Cement Concrete of prop.(1:4:8) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hosting, lowering, laying compacting concrete in layers not exceeding 6\\"thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty & taxes of all materials, with labour T&P required for the work etc. complete in all respects including dewatering if required as per direction of engineer-in -charge.(A) Boundary Pillar |
| 12 | Plain Cement concrete of proportion (1:2:4) using 12mm (1/2 \\") size hard granite crusher broken chips of approved quality from approved quarry and including lowering laying concrete watering and curing etc. complete to the required levels laid in layers not exceeding 15cm. thick including cost and conveyance, royalities and taxes of all materials and cost of all labour with T&P required for the work complete.(A) Boundary Pillar |
| 13 | Supplying fitting and fixing R.C.C. (1:2:4) fencing posts with chips 1.68M long 13cm × 13cm at bottom and 8cm × 8 cm at top and 30cm × 30cm × 8 cm base finished smooth(A) Boundary Pillar |
| 14 | Supplying and fixing barbed wire including all cost etc. complete as per direction of Engineer-in-charge.(A) Boundary Pillar |
| 15 | Labour for fixing barbed wire fencing and post by means of staples and straining hooks by means of tying with G.I. wire and including cost of staples, hooks and tying wires(A) Boundary Pillar |
| 16 | Providing lifting, hoisting and laying R.C.C. of M-20 Grade with 20mm and down grade C.B. chips to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required providing plaster with cement mortar (1:4) wherever necessary without any extra cost) including rigid smooth centering and shuttering, scafolding, watering (excluding reinforcement bars) and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge.(A) Compound Wall(i) Column base footing |
| 17 | (ii) Column in Super Structure |
| 18 | (iii) Plinth Band |
| 19 | (iv) Floor Beam |
| 20 | (B) Gate and Security Room(i) Column Base Footing |
| 21 | (ii) Column |
| 22 | (iii) Column in Super Structure |
| 23 | (iv) Plinth Band |
| 24 | (v) Lintel Band |
| 25 | (v) Floor Beam |
| 26 | (vi) First Floor (Gate Top Level) |
| 27 | (vii) Roof Slab |
| 28 | (viii) Roof Slab (First Floor) |
| 29 | Supplying, cutting, straightening of steel HYSD (Fe- 415) conforming to (IS- 1786) with bending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering & laying steels including cost conveyance, taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges (payment will be made on weight of MS rod or tor steel only basing on the co- efficient of MS rod or tor steel bars approved by SAIL / TATA / competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage, coupling, welded, joints , spacer bars, chairs stays, hangers and annealed steel wires or other methods for binding and placing etc.).(A) Compound Wall |
| 30 | (B) Gate and Security Room(i) Ground Floor level |
| 31 | (i) Gate Top level |
| 32 | First class Fly ash Brick masonry using bricks of size 23 cm. x 11 cm. x 8 cm. (with dimensional tolerance of +85%) having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement (PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge..(i) Compound Wall |
| 33 | (B) Gate and Security Room |
| 34 | Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.(A) Compound Wall |
| 35 | (B) Gate and Security Room(i) Upto Roof Level |
| 36 | (ii) Top Level of Gate |
| 37 | Providing 12 mm thick cement plaster (1:6) (1 cement : 6 sand) to outside plastered surface / plumped surface of masonar, racking out joints, cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing as shown in the drawing including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalities, scaffolding, watering, curring, sundries, tools and plans etc complete as per direction of E.I.C.(A) Compound Wall |
| 38 | (B) Gate and Security Room(i) Upto Roof Level |
| 39 | (ii) Top Level of Gate |
| 40 | 16mm (5/8\\") thick cement plaster (1:6) in finishing smooth to inside rough surface of 10\\" thick brick walls after racking out the joints including watering and curring, with cost conveyance royalty and cost of all labour T & P required for the work etc. complete.(A) Gate and Security Room |
| 41 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C.(A) Gate and Security Room |
| 42 | Supplying, fitting and fixing Vitrified tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. (A) Gate and Security Room |
| 43 | Fixing Vtrified tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.(A) Gate and Security Room |
| 44 | Primering one coat with any approved shade of primer of approved make over the plastered surface of walls including cost, conveyance and taxes of all labour with T&P required for the work etc. complete as directed by the Engineer-in-charge. (A) Compound Wall |
| 45 | (B) Gate and Security Room |
| 46 | (C) Top level of Gate |
| 47 | Wall painting two coats with plastic emulsion paints of approved shade on new work by means of brush including watering and curing etc. complete including cost of paint with taxes and cost of all labour with T & P required for the work etc. complete.(A) Gate and Security Room |
| 48 | Wall painting two coats with weather coat of approved shade on new work by means of brush including watering and curing etc. complete including cost of paint with taxes and cost of all labour with T & P required for the work etc. complete.(A) Compound Wall |
| 49 | (B) Gate and Security Room |
| 50 | (C) Second Floor |
| 51 | Supplying, fitting and fixing of openable UPVC door with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.(A) Gate and Security Room |
| 52 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete(A) Gate and Security Room |
| 53 | (B) Ornamental Gate |
| 54 | (C) Cow Catcher |
| 55 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.(A) Gate and Security Room |
| 56 | Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (A) Gate and Security Room |
| 57 | Painting one coat with any approved enamel paint on New wood / iron work after cleaning the surface, sand paparing etc. complete as directed by the Engineer-in-charge using paint including cost and conveyance taxes of all materials including cost of paint with taxes and cost of all labour with T&P required for the work etc. complete in all respect.(A) Gate and Security Room |
| 58 | 25mm thick grading concrete (1:2:2) on roof slab with 6.7 mm size hard granite on new work after chipping and chiselling the same and cleaning the surface by wire brushes watering and curring etc. complete including cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete in all respect.(A) Gate and Security Room |
| 59 | Construction of Granular Sub-Base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.(A) Approach Road |
| 60 | Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site laying in uniform layers with Paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(A) Approach Road |
| 61 | Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.(A) Approach Road |
| 62 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.(A) Approach Road |
| 63 | PH PORTION OF WORK:-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.(A) 20mm dia C - PVC pipe |
| 64 | (B) 25mm dia C - PVC pipe |
| 65 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 15mm dia CP angle stop cock (Con - CHR - 053KN Jaquar make) |
| 66 | (ii) Elbow |
| 67 | (iii) 15mm dia CP two in one bib cock (Con - CHR - 041KN Jaquar make) |
| 68 | (iv) 15mm dia CP Bib cock (Jaquar - Medi series) FLR - CHR - 5043N |
| 69 | (v) 15mm dia CP Long Body Bib cock (Con - CHR - 107KN Jaquar make) |
| 70 | (vi) 20mm dia CP consealed stop cock (Con - CHR - 083KN Jaquar make) |
| 71 | (vii) 15mm dia CP Health faucet (Con - ALD - MCH - 573 Jaquar make) |
| 72 | (viii) 25mm dia brass full way valve (Shakti make) |
| 73 | (ix) 32mm dia brass full way valve (Shakti make) |
| 74 | (x) 15mm CP Extension piece |
| 75 | (xi) 125mm CP grating |
| 76 | (xii) 15mm size C.P. flange |
| 77 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 110mm U-PVC SWR Pipe (Supreme / ahirvad) |
| 78 | (ii) 110mm U-PVC ‘P’ Trap (Ori Plast / Finolex / Supreme Make) |
| 79 | (iii) 110mm U-PVC door bend (Ori Plast / Finolex / Supreme Make) |
| 80 | (iv) 110mm U-PVC Plain bend (Ori Plast / Finolex / Supreme Make) |
| 81 | (v) 110mm U-PVC offset without ear (Ori Plast / Finolex / Supreme Make) |
| 82 | (vi) 110mm U-PVC Cowl (Ori Plast / Finolex / Supreme Make) |
| 83 | (vii) 110mm U-PVC S/Jn door (Ori Plast / Finolex / Supreme Make) |
| 84 | (viii) 110mm U-PVC Plain tee (Ori Plast / Finolex / Supreme Make) |
| 85 | (ix) 110mm U-PVC Door tee (Ori Plast / Finolex / Supreme Make) |
| 86 | (x) 110mm U-PVC Socket (Ori Plast / Finolex / Supreme Make) |
| 87 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI P or S trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 580mm size Orissa pan (Hindware / Parryware / Neycer make) |
| 88 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 89 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge |
| 90 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make) |
| 91 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) European water closet with P trap plain(Hindware / Parryware / Neycer make) |
| 92 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.(i) 550mm x 400mm W.H.basin (Hindware / Parryware / Neycer make) with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 93 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.(i) 25mm x 600mm long CP towel rail |
| 94 | (ii) Towel ring |
| 95 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.(i) 600mm x 125mm plate glass shelf with CP/NP guard rails. |
| 96 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.(i) 600mm x 450mm size B.E mirror (swivelled type) |
| 97 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.(i) CP soap holder |
| 98 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 99 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60m X 1.60m and 0.10m thick, RCC beam of 0.25m x 0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering, watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc.all complete as per approved drawing, P.H. specification and direction of Engineer-in-charge.(i) 2000 liters capacity PVC water storage tank |
| 100 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 101 | Supplying all materials, labour, T&P and constructing Inspection Chamber of inside size 760mm x 760mm x 460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed, KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.(i) Inside size 76cm x 76cm x 46cm with 18” dia RCC MH cover |
| 102 | 1 No. 30 Users Septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. |
| 103 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 104 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 105 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 106 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 107 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 108 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge.(i) RCC floor, roof slab chhaja up to 4.430 m height |
| 109 | Supplying all materials, labour, T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance + 8% in cement mortar (1:3) including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 110 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster(1:3) on brick work including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per PWD specification and direction of the Engineer-in-charge. |
| 111 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 112 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC (1:2:4) for fixing etc. complete as per PH specification. |
| 113 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 114 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 115 | EI PORTION OF WORK:(A) Sub-Head I (modular Wiring Items)Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make - Finolex / Anchor / Polycab / HAVELLS / RR KABLE / KEI / Gloster with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG / BEC / Precision / Norpak / Anchor / Kinjal 6A modular type (flame retradant type) switch ISI marked Make-Schneider (Zencelo) / legrand (Myrius) / Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retradant type) Make - Schneider (Zencelo) / legrand (Myrius) / Panasonic (vision) of suitable size, modular box with 1.5 sq. mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. a) GROUP-A |
| 116 | b) GROUP-B |
| 117 | c) GROUP-C |
| 118 | Supplying, fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) (flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider (Zencelo) / legrand (Myrius) / Panasonic (vision). |
| 119 | Supply of computer board with 3 nos 5 amp switch & socket of approved ISI Make. |
| 120 | Supplying, fixing of 2 x 6A Plug on the separate board with complete fitting by 02 no of 6A switch & socket(modular type) (flame retradant type) with suitable size modular box & metallic cover plate (both side) (flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo) / legrand (Myrius ) / Panasonic (vision) (For equipement power) (Maximum 02 nos point in one circuit). |
| 121 | (B) Sub Main WiringRecessed wiring for circuit / submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex / Anchor / Polycab / HAVELLS / RR KABLE / KEI / Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG / BEC / Precision / Norpak / Anchor / Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB / LIGHT CKT) (2X1.5+1X1.5) |
| 122 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable MMake- Finolex / Anchor / Polycab / HAVELLS / RR KABLE / KEI / Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG / BEC / Precision / Norpak / Anchor / Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (BDB to LSB / LIGHT CKT / 5A PLUG / UPS POINT) (2X2.5+1X1.5) |
| 123 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex / Anchor / Polycab / HAVELLS / RR KABLE / KEI / Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG / BEC / Precision / Norpak / Anchor / Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit . (PDB to PSB / POWER POINT / AC POINT) (2X4+1X1.5) |
| 124 | (C) Sub-Head II (Light fitting Fixture & Fan)Supplying, installation, testing and commssioning of 1200 mm sweep white / milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥ 215m3 / min Make-Crompton Energion Groove / Havells Efficiencia Neo / Usha Technix) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge, |
| 125 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make - Havells / Crompton / Usha / Orient / Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. |
| 126 | Supplying and fixing of Energy efficient surface /ecess mounted square / round shape 15 W LED luminaire of dimension of consists of white powder coated, die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, CRI not less than 80,CCT of 6000 degree K, THD less than 10%, with electronic driver, internal surge protection of 3 KV, L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic / LT / Havells / Philips / Wipro / Crompton / Bajaj). The luminaire should be Replacement Warranty will be 2 years. (Covered at Corridor area also) |
| 127 | SITC of 40w LED Gate Light (Havells / Panasonic / Bajaj or Eq.) with 5 years warranty, GI pipe with bracket including MCB Box and Foundation |
| 128 | S/F of Street light- 25W,120 lm/w efficiancy, IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Bajaj / polycab / crompton / Eq.) (With Necessary angle) |
| 129 | S/F of Street light- 90W, 120 lm/w efficiancy, IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover (Make: Bajaj / polycab / crompton / Eq.) |
| 130 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic / LT / Havells / Philips / Wipro / Crompton / Bajaj). |
| 131 | BDBS,DB,AC DB,FLOOR PANELS,MCBSSupplying and fixing 20 - 32 amps rating, 240 volts, C series, 10KA breaking capacity, Double poles MCB of Make - LEGRAND - DX3 / Siemens - Betaguard / Schneider - Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 1 year. |
| 132 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, 10KA breaking capacity, single poles MCB of Make-LEGRAND - DX3/ Siemens - Betaguard / Schneider - Acti 9 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years. |
| 133 | S/F of 6way Double door MCB DB (Make - Anchor / Havells / Polycab / L&T) |
| 134 | S/IT/C of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 135 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. |
| 136 | Supplying & laying of 10 mm2 Service Cable of any appproved ISI Make Please Enable Macros to View BoQ information |
