|
| 1 | Pipeline |
| 2 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 3 | Supplying all labour and T&P for earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge |
| 4 | Supplying all materials,labour and T&P for filling pipe line treanch with sand and rammed etc as per direction of Engineer-in charge. |
| 5 | Supplying all materials,labour and T&P for providing C.C (1:2:4) with 12 mm size h.g chips etc. complete as per direction of Engineer-in-charge. |
| 6 | Filling foundation and plinth with excavated materials including watering and ramming as per specification & direction of Engineer-in-charge. |
| 7 | Supplying all labour and T&P for removal of excavated earth from site to a distance 5 km away etc all complete and as per direction of Engineer-in-charge. |
| 8 | Sand+ Concrete |
| 9 | Supplying all labour T&P for provision of pump set for dewatering from the trenches including cost of POL and operator etc all complete and as per the direction of Engineer-in-charge. |
| 10 | Supplying all materials, labour and T&P for Laying in trenches centrifugally Cast (Spun) K - 7 Class Ductile Iron socket and spigot pipe confirming to IS: 8329-2000 of the following nominal diameter as per specification and direction of Engineer-in-charge including carriage of pipes from store to worksite, supplying of all labour, material, tools & plants required to perform the work (Earthwork in trenches, jointing of pipes, specials & fittings to be measured and paid for separately) |
| 11 | Laying with material cost |
| 12 | 100mm.dia D.I. pipe (K7). |
| 13 | Supplying of all materials,labour and T&P for Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete as per direction of Engineer-in charge. (Labour only) |
| 14 | 100 mm.dia D.I. Tyton Joint |
| 15 | Supplying all materials, labour and T&P for Providing, laying, fixing & testing of D.I / C.I Specials, Bends, etc in trenches confirming to IS: 1538 all complete as per specification and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work. (excluding earthwork) |
| 16 | supplying all materials ,labour and T&P for providing and laying MS pipe and specials conformng to IS 3589/99 of quality grade Fe 410 of following nominal dia and including transportation of pipes and fitting to site etc all complete as per direction of Engineer- in-charge. |
| 17 | 100mm dia M.S pipe= (4.50mm thick) |
| 18 | 100mm dia MS 90° Bend (Plain) |
| 19 | 100 mm dia MS flange (10mm thick) |
| 20 | Supplying all materials,labour T&P for making mechanical joint for C.I pipes of the following dia meter including testing of joints etc all complete |
| 21 | 100 mm dia Mech joint Socket tail piece. |
| 22 | Supplying all materials,labour and T&P and making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of Engineer-in-charge |
| 23 | 100 mm dia flange joints. |
| 24 | Supplying all labour T&P for Cutting of C.I/D.I pipe by eletric arc welding at site including cost of materials,labour,T & P etc all complete e as per the direction of Engineer-in-charge. |
| 25 | Supplying all materials labour and T&P for cutting of following dia MS pipe etc all complete as per the direction of Engineer -in charge. |
| 26 | Supplying all materials labour and T&P for electric arc welding of following dia MS pipe etc all complete as per the direction of Engineer -in charge. |
| 27 | Supplying all materials,labour and T&P for fixing of sluice valve with double flanged ends for water works purposes of the following rating and diameter including testing of joints as per specification and direction of Engineer-in-charge. (PN-1.6 with wheel) |
| 28 | 100mm dia D/I. Resilient seated Sluice Valve (VAG/TALIS/AVK make) |
| 29 | Supplying all materilas, labour and T&P for the construction of fly ash brick masonary sluice valve chamber of following internal size including earth work in excavation in all kinds of soil, laying of 150mm thick C.C (1:4:8) with crusher broken hard granite metal up to 4cm size, 250mm thick fly ash brick masonary work in fly ash brick in CM (1:3) having crushing strength up to 75kg/cmsq,12mm thick CP with CM(1:3) for both outside & inside surfaces and out side surfaces cement flush pointing filling of annular spaces after the construction of chamber with slab. |
| 30 | S.V.chamber Inernal size [0.90 x 0.90 x 0.90 mtr] with Including RCC cover slab |
| 31 | Supplying all materials , Labour & T & P for providing New House connections to beneificiares from PHE Deptt./WATCO CI/DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc. including earth work excavation ,cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damages road with CC (1:2:4) after completition of the work, lifting of excess excavated materials / debrises from work site & disposed within 5 KM radious by mechanical transport , fixing 1/8\\" dia brass/ GM ferrule with following dia composite Strap Saddle in the CI/DI pipe line , cutting holes in brick/ stone / RCC masonary work , repair the broken holes , cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively ) & fittings , 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in Charge. |
| 32 | With 100mm dia distribution main |
| 33 | Supplying all materials Labour & T & P for fitting & fixing of 20mm dia MDPE pipe (PE -80, 10 kgf/cm2) of different diameter to make the connection lea proof including cost of required length of MDPE pipe,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc. complete as per site condition & ditrection of Engineer in charge. (Extra Quantity MDPE Pipe as per field requirement). |
| 34 | Supply of consumer water meter of size 15mm dia as per ISO 4064 including transportation etc all complete with 5 (five) years replacement guarantee from the date of receipt of the materials by the consignee as per direction of Engineer-in-charge. The water meter shall be inferential type, multi jet, magnetically coupled having dry dial, Brass/Bronze body, coper can/stainless steel register with 5mm thick glass dialer Class-B confirming to ISO 4064standard with ISI & MID certification mark, shall be withprotection class of IP-68 complete with connecting pieces and all test certificates. Water meter should have certificate for the model approval as per Indian Legal Metrology Act, 2009 and weights & measure marking (i.e. W&M making) and confirming to the technical specification for consumer water meter. |
| 35 | Fixing of water meters (Domestic type) conforming to IS 779/1994 and stop cock in GI mild steel pipe / PVC pipe/ PE pipe including costof 15mm UPVC ball valve with solvent welded metal ball, 15mm brassNRV, 25 x 15mm bush, 15mm FTA, 25mm or 15mm Union, 15mm pipe and nay other fittings required all completeas per direction of E.I.C. (Deptt Isue) Please Enable Macros to View BoQ information |
