|
| 1 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 2 | All kinds of soil |
| 3 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 5 | All kinds of soil. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 10 | On steel work |
| 11 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 12 | 110 mm diameter |
| 13 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 14 | Coupler110 mm |
| 15 | Single tee with door110x110x110 mm |
| 16 | Bend 87.5°110 mm bend |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 18 | 25 mm nominal dia Pipes |
| 19 | 40 mm nominal dia Pipes |
| 20 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of stone aggregate 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 21 | Providing and fixing UPVC Gutter (160 mm x160 mm ) including all necessary accessories as per the direction of the Engineer-in-charge |
| 22 | Providing and fixing UPVC pipe clips of approved design to UPVC pipes with screws of required length etc. complete as per the direction of Engineer-in-charge. |
| 23 | 110 mm |
| 24 | Providing and fixing CPVC ball valve of approved quality |
| 25 | 25 mm nominal bore |
| 26 | 40 mm nominal bore |
| 27 | Providing and fixing CPVC union socket of approved quality |
| 28 | 25 mm nominal bore |
| 29 | 40 mm nominal bore |
| 30 | Providing and fixing 200 GSM anti fungal UV treated poly film approved quality and make, and fixing it on the roof as per the requirement. |
| 31 | Providing and fixing of UV treated 40 mesh insect proof nylon net of approved quility and make, and fixing it on all side of the poly house as per direction of Engineer-in-charge. |
| 32 | Supplying and fixing 100 GSM wooven fabric weedmat black in colour as per direction of Engineer-in-charge. |
| 33 | Supply and fixing of UV treated 80 GSM 50 % green shade net all over the structure including all labour charges etc complete as per direction of Engineer-in-charge. |
| 34 | Supply and fixing aluminium channel with zig zag opening including all labour charges etc complete for tightening the UV film, shade net in insect net etc complete as per direction of engineer-in-charge. |
| 35 | Providing and installation of 16 mm LDPE lateral pipe with all fittings and accessories for fixing mist spinkler. |
| 36 | Supply and instalation of 26 LPH jain butterfly mist sprinkler etc complete as per direction of Engineer-in-charge. |
| 37 | Supply and installation of 25 cum sand filter etc complete as per direction of engineer-in-charge. |
| 38 | Supply and installation of 12 cum screen filter etc complete as per direction of engineer-in-charge. Please Enable Macros to View BoQ information |
