|
| 1 | A/R &M/O Residential/Non Residential Buildings at Girinagar |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below (I.No.15.12 + 15.12.1) |
| 3 | 14.6.1 Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) |
| 4 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete - With 2nd class teak wood beading 62x19 mm (I.No.9.51 + 9.51.1) |
| 5 | 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 6 | 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:9.21.1 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 7 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws - Second class teak wood - 30 mm thick (I.No.9.9 + 9.9.1 + 9.9.1.1) |
| 8 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters - with ISI marked M.S. pressed butt hinges bright finished of required size - Second class teak wood (I.No.9.27 + 9.27.1 + 9.27.1.1 + 9.27.1.1.1) |
| 9 | Providing and fixing bright finished brass helical door spring (superior quality) (I.No.14.39) |
| 10 | Providing and fixing ISI marked oxidised M.S. Sliding door bolts with nuts and screws etc. complete : 250 x 16 mm (I.No.9.62 + 9.62.2) |
| 11 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (I.No.9.63) - 150x10 mm (I.No.9.63.3) |
| 12 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (I.No.9.100) - 150 mm |
| 13 | 11.41.2 Providing and laying vitrified floor tiles indifferent sizes (thickness tobe specifiedby the manufacturer) with water absorption less than 0.08%and conformingtoIS:15622,of approved make, in all colours and shades, laid on 20mm thick cement mortar1:4(1cement :4coarsesand), jointing with grey [email protected]/sqm including groutingthe joints with white cement and matching pigments etc., i/c old tile dismantaling and stacking within 50 metres lead .complete. 11.41.2 Size of Tile 600x600 mm |
| 14 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content - With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams / litre (I.No.13.85 + 13.85.1) |
| 15 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all comp with cement mortar 1:4 (1cement: 4 coarse sand) (I.No.14.1+14.1.2) |
| 16 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 17 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 18 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 19 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.13.83.2 Two coats |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (I.No.13.99 + 13.99.1) |
| 21 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade(Apex Ultima) 13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface |
| 22 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface(asianpaints 7892 UDI/34) |
| 23 | Painting with aluminium paint of approved brand and manufacture to give an even shade - Two or more coats on new work (I.No.13.63 + 13.63.1) Please Enable Macros to View BoQ information |
