Name of Work:- uxj ikfydk {ks= esa yxh ,y-bZ-Mh ykbZVksa dk fo|qr fjis;fjax leku miyC/k djkus dk dk;ZA
Sl. No.
Item Description
1
Providing & Laying P.V.C./XLPE insulated & P.V.C, sheathed UnArrmoured Aluminium cable confirming to IS:1554 P-I/IS :7098 P-1 of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6%, Inner / outer sheath confirming to IS:5831 in existing RCC/Hume/ Stoneware / PVC pipe/ open duct/cable trench/Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product/ work refer Annexure 'A attached with this BSR 16X 2 sq. mm. (insulated)
2
Providing & Fixing of 240/415 V AC MCB with positive isolation kAbreaking capacity (B/C/D tripping characteristic as load and siterequirement) 4 KV impulse withstand voltage, ISImarked IS 8828(1996) /conforming to IEC 60898-1 2002, IEC60947-2, low watt losses, trip free mechanisum, energy limiting ofclass 3 as per IEC, minimum phase termination capacity of35sq.mm., conductor line load reversibility, IP 20 contact protectionand fitted in existing distribution board/sheets, minimum electricaloperation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80A & above rating including making connections, testing etc. asrequired. OEM shallhave submit NABL/CPRI / ERDA accrediatedlab type test reports & All as per pre approved by Engineer in 0.5 A to 5 A ratin
3
Double pole MCB(With B/C curve tripping Characteristics)
4
Four pole MCB (With B/C curve tripping Characteristics)
5
Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2)/Copper(IEC 60028) bus bar by means of SMC/ DMC type insulator withstandard short circuit withstand capacity, high tensile nuts and boltsspring washers in existing panel including bending, cutting inrequired shape and size and colour coding with heat shrinkable PVCsleeves. All as per pre approved by Engineer in-charge. For additionaltechnical parameters of products/ work, refer Annexure \\"A\\" attachedwith this BSR
6
Main Panel Street Light Control Panel Commissioning Kiosk typeweathe proof panel out door main cubic panel size 750x1250x500they shall be in two section comaring as follows BSR 2017 (59.57)
7
Supply & drawing Wiring for sub mains ISI marked (IS:694) 110Volts grade PVC insulated flat twin core sheathed solid aluminium 4 SQ Mм2 CORE FLAT Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
