|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Cutting road and making good the same i/c supply of extra quantities of materials i.e. aggregate, moorun screening, red bajri and labour required of bituminous portion |
| 3 | Cutting road and making good the same i/c supply of extra quantities of materials i.e. aggregate, moorun screening, red bajri and labour required of bituminous portion |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (Not exceeding 1.5 m in width as we as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50 and lift upto 1.5m, as directed by Engineer-in-charge. The contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavating only after getting permission of Engineer-in-Charge. All kinds of soil. |
| 5 | Extra for every additional lift of 1.5 or part thereof in excavation/banking excavated or stacked materials. All kind of soil…………… 1)1.50 to 3.00 m |
| 6 | 2) 3.0 to 4.50 m |
| 7 | Supply and installation of required size Steel pipe 10 mm thick conferming to IS:3589 through trenchless Excavation of thrust pit and receving pit of required size and the excavation& filling back and compaction complete as per specification for road crossing by Auger Boring method. Pipe will be installed at depth beyond 3.0 m. below the ground surface in downward required slope (NSI-2)a)800mm dia 10 mm thickness |
| 8 | Repairing of Existing PSC line including cutting of pipe, bailing out of water P/F by diesel engine but excluding cost of excavation, filling & MS special, welding set, DG set & Gas cutter etc. complete as per direction of E/I.a) 600 mm dia PSC |
| 9 | b) 700 mm dia PSC |
| 10 | P/F M.S. specials such as tee, bends, collars, pipe tail piece etc. in required thick of MS sheet complete in all respect as per direction by the E/I. NSI |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, lead upto 50 m and lift upto 1.5 m. |
| 12 | Hire Charge Of Mobile Crane |
| 13 | Supply of J.C.B Machine on hire charge basis for 8n hours working per day with fuel, operator, helper etc. complete in all respects |
| 14 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : Derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Disposal of building rubbish/malba/ similar unserviceadle,dismanteled or waste materials by meachanical means, including loading, transporting, unloading to approved by Engineer-in-charge, beyond 50m intial lead, for all leads including all lifts involved |
| 17 | Hiring of diesel engine (Including cst of Diesel, Lubricant & Operator ) |
| 18 | Charge of generator (Including cost service of operating staff, supply of lubricating oil and diesel also)DG Set/ Generator 50 KVA |
| 19 | Hiring of Gas cutting set With Oxygen and LPG Running Time @ 6 Hrs |
| 20 | Hiring of Welding Set Running Time @ 6 Hrs |
| 21 | Providing and Laying S & S Centrifugaly Cast (Spun)/Ductile Iron Pipes conferming to IS : 8329. a) 600 mm dia Ductile Iron Class K-7 pipes Please Enable Macros to View BoQ information |
