Tender For High-Mast Installation Work On 12.50 Meter Pole In Village Kawaljhar. , High-Mast Installation Work On 12.50 M Pole In Village Kawaljhar. , Supply/Fixing Of Factory Wired Integral Led Flood Light Luminaries With Die Cast Aluminum Housing B, Mirzapur-Uttar Pradesh
TDR : 55010663
Tender Notice
BOQ
8 Days Left
Mirzapur
Uttar Pradesh
Tender For High-Mast Installation Work On 12.50 Meter Pole In Village Kawaljhar. , High-Mast Installation Work On 12.50 M Pole In Village Kawaljhar. , Supply/Fixing Of Factory Wired Integral Led Flood Light Luminaries With Die Cast Aluminum Housing B
Name of Work:- ग्राम कवलझर में 12.50 मी० पोल पर हाई-मास्ट स्थापना कार्य|
Sl. No.
Item Description
1
ग्राम कवलझर में 12.50 मी० पोल पर हाई-मास्ट स्थापना कार्य|
2
S/F of factory wired integral LED flood light luminaries with die cast aluminium housing built with driver set suitable for 170 to 200 watt. Confirming to IP 66 protection complete in all respect. As per PSI No. 1455, CAT-AAA
3
S/F following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors , HRC fuses , isolating switch metering instrument & instrument box with CTs etc. In case of TPN , complete in all respect. 25 AMP TPN As per PSI No. 807 (e) (ii)
4
Supply & burring of safe Earthing Eletrode T-19 A-Alloy Coated , Length 2000mm, outer pipe 50 mm , inner pipe 25 mm terminal Dia 12mm outer GI pipe of 16 swg and inner GI pipe of 12 swg withhot dip galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (from electrode terminal to switch board , cost of 25x3 G.I. strip will be extra) Make : As approved in U.P.P.W.D., C.P.R.I. Certified As per PSI No. 725 (A)
5
S/F of 12.5 mtr High shaft of approved make with rising system hot dip galvanized inside & out side dip , heavimg pole sheet thickness 3mm Top dia minium 50mm, Bottom dia 310mm base plate 25 mm & having no circumferential weld ,with accessories for high mast such as head frame suitable for 6 luminaries and its control gear boxex 0.75 H.P power tool moter, 3 point suspension system with steel wire rope 8mm dia, double drum winch, including making suitable foundation as per manufature drawing /site recruiment along with foundation bolts nuts, washers, anchor plater etc complete in all respect. As per SI no. 651
Supply and laying of 25 sq. mm 3-1/2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with brunt bricks on sids and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer -incharge, comp. in all respect. The armouring of the cable shall be properly connected with the earth condutor by clamps etc. as per PSI NO. 501 (J)
8
S/F of vertical down conductor of 32 mm*6 mm GI strip ect. On aproved clamp on surface for lightning conductor complete in all respect as per PSI no. 713 (A) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
