|
| 1 | RAW WATER PUMPING PLANT:-Supplying, Installation, Testing and commissioning of water lubricated Vertical Turbine Pump [ Make: Kirloskar/ Mather & Platt/ Jyoti/WPIL ] capable of discharging 200 m3/hr raw water against a total head of 50 meter at speed not more than 1500 RPM as per IS: 1710/1989 with column length not less than 50 feet in length of 5 feet, with closed type SS Impeller, SS line shaft, SS shaft sleeves, flanged type MS column pipes suitable for installation coupled with vertical solid shaft operated on 415V±10%, 3 phase, AC, 50 Hz, 4 Pole, Duty-S1, Insulation-F, LT Squirrel Cage induction motor with suitable size of coupling as per latest IS specification [ Make: ABB/ BHEL/ Crompton/ Jyoti/ Kirloskar ] having 10% more BHP than the pump, making alignment, making electrical connections, with suitable dia CIDF Sluice valve, NR Valve etc all complete with all labour tools tackles and technician charges etc all complete and testing on full load. |
| 2 | Cost towards dismantling, lifting of old pump sets with all column pipes from intake well with all accessories along with all labour tools and tackles etc all complete. |
| 3 | Cost towards breaking of old PCC foundation and removing of all garbage from pump house to out side with lead of 100 m and making of new PCC foundation size-2'x2'x1' with all materials such as stone chips, sand, cement, foundation bolts-4Nos. and plastering and punning over expose surface with all labour tools and tackles etc all complete. |
| 4 | Cost towards making G.I. / M.S Delivery common header with supply and laying of 6\\"dia delivery line with s/f of 6\\" dia heavy duty G.I./M.S. Pipe-25 meter, 6\\" dia G.I./M.S. Bend-2 No, 6\\"dia G.I. flange-12Nos., other fittings etc, Rubber insertion-15 Kg, Nut, bolt & washer-20 Kg etc and cutting of pipe in required size, doing complete welding work for proper common header, painting of complete common header and fittings, including all labour, tools, tackle and technician charges.with CP & OHC. (Rate after deducting the scrap materials.) For both Pump sets. |
| 5 | Cost for supplying and laying of 3.5 Core x 120 mm2, PVC insulated and PVC sheathed armoured aluminium cable of 1.1 KV grade. From Pole to Panel with CP and OHC. Havells/ any reputed ISI Marked make |
| 6 | Cost for making connection to above cable from electric pole in river bed to Main switch to Motor control panel including boat charges with electrician and labour charge etc. |
| 7 | Cost for supplying and laying of 3 Core x 25 mm2, PVC insulated and PVC sheathed unarmoured copper cable of 1.1 KV grade. From Panel to Motor in 2 length each for both motor with CP and OHC. Havells/ any reputed ISI Marked make |
| 8 | Socketing of terminal ends with s/f of terminal socket including all labour , tools and tackles. 3 Core x 25 mm2,copper cable- |
| 9 | 3.5 Core x 120 mm2,Aluminium cable- |
| 10 | Cost towards Supplying, Installation, Testing and Commissioning of floor/wall mounted cubical L.T Motor Control Panel fabricated with MS sheet and painted, dust and vermin proof, proper ventilated, consisting of –(a). Copper distribution 315 amp copper bus bar 4 Pole-1 set(b). Micro processor base TPN MCCB 315Amp L&T or L&K/ Siemens/BCH /Schneider make for incoming feeder – 1No., Voltmeter-1No., Ampere meter-1No. & selector switch-2 Nos. or Digital meter-1 No.(c). MCCB 200 Amp. 3ph, L&T or L&K/ Siemens /BCH/Schneider make for outgoing feeder-2 Nos.(1No for each pump sets) & 16Amp MCB feeder for lighting and utility-1No. (d). Suitable size of fully automatic star delta starter L&T or L&K/ Siemens /Schneider /BCH make -2 Nos.(e). Voltmeter-2Nos., Ampere meter-2Nos., Selector switch-4 Nos., or Digital meter, Phase indicating lamp-9 Nos., and Single Phase Preventer-2Nos., proper inside wiring with suitable size of copper wire etc all complete & testing on load. |
| 11 | Cost towards supply and fitting of 315 A Main switch heavy duty, L&T / L&K Or any reputed make including mounting / fixing of foundation bolt on wall with all materials , labour, tools, tackles and technician charges. |
| 12 | Cost for supplying and fixing of 50 watt LED flood light with bracket with all fittings and accessories etc all complete for with C.P. & OHC. [Make-Havells/Syska/Mescab/Bajaj/Any reputed make.] |
| 13 | Supplying and fixing 5 ton capacity triple gear chain pulley block with 6 meter lifting chain of reputed make and ISI marked. |
| 14 | Supplying and fitting of 100 KVA Servo controlled voltage stabilizer suitable for input voltage 220-460 volts, output voltage of 415 volt±1%, 3 Ph, 50 Hz, with copper wound transformer (oil cooled), Unbalanced type, Oil cooled, Three Phase, Frequency : 50 Hz. Speed of Correction : 35V/ second. Regulation : + 1% from no load to full load.Ambient Temperature : 0 to 55 degree centigrade (Designed for indoor continuous operation. Operation : Automatic cum Manual, MCB for short Circuit & Over Load Protection, High Volt -Low Volt Indicator & Volt Meter with all necessary Switches and Indicator the stabilizer shall function satisfactory even if incoming supply is unbalanced between phases within range of 10%. The stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and output voltage, Auto/Manual selector switch, Raise/Low push button etc. suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. All three phases shall independently monitored and corrected.Make – Powerline/Servokon/Any Reputed make |
| 15 | Supplying and filling transformer oil of reputed make ISI Marked |
| 16 | Supplying and fitting 315 Amp changeover switch. Make – Havell’s/L&T/Any reputed make including mounting / fixing of foundation bolt on wall with all materials , labour, tools, tackles and technician charges. |
| 17 | Cost towards repairing of existing railing of intake well with supply and fitting of 1\\" or suitable dia G.I. Pipe-60 meter with socket-15 Nos., repairing of chequer plate floor, making of M.S. fabricated Gate size 3'x4' -1 No.with locking arrangement, , making MS fabricated windows size 3.5'x3.5''-2Nos. including painting on metal surface, all material,labour tools and tackles charges etc all complete. (Rate after deducting the scrap materials.) |
| 18 | Cost towards making scaffolding, cleaning wall surfaces, doing 1 coat primer and making 2 coat wall paint of approved shade in inner wall surface of raw water pump house only including scaffolding charges, all materials, all labours, painter, tools and tackles etc all complete. |
| 19 | CLEAR WATER PUMPING PLANT:-Cost towards Supplying, Installation,Testing and Commissioning of electrically driven Horizontal Split Casing Centrifugal pump set make (Kirloskar/ WPIL/ Mather & Plate/ Jyoti ) coupled with TEFC sq. cage induction motor make (Kirloskar/ Crompton/ Jyoti/ ABB) operated on 415 ± 10% volts, 50Hz, 1450-1500 RPM mounted on common M.S. fabricated base plate with suitable size of CIDF sluice valve-1 no, CIDF NR valve-1 no, foot valve-1 no, pressure gauge-1 no, coupling-1 no etc all complete. Head- 40 m Discharge- 200 m3/h |
| 20 | Supplying all labour tools and tackles for taking out old and damaged C/F pump set with all accessories , demolition of foundation for installation of new HSC centrifugal pump sets. |
| 21 | Supplying all labour tools and tackles for making new PCC foundtiaon of size 5′ x 3' x 3′ with all materials such as cement , sand, stone chips, foundation bolt-6nos etc all complete and plastering and punning over exposed surface with all labour, tools, tackle and technician charges. |
| 22 | Cost towards supply and laying of 5\\"or suitable dia suction pipe line as per pump model with s/f of 5\\" dia G.I. Pipe- 20 meter, 5\\" dia G.I. Bend-2 No., 5\\"dia G.I. flange-6Nos., (or suitable dia pipe, valve & other fittings etc as per pump model), Rubber insertion-10Kg, Nut, bolt & washer-10Kg etc and cutting of pipe in required size and doing complete welding work including excavation of earth (15 m approx) and backfilling the same for laying of suction pipe line, including painting on metal surfaces, with all materials, labour, tools, tackle and technician charges.with CP & OHC. (Rate after deducting the scrap materials.) |
| 23 | Cost towards making G.I. / M.S Delivery common header with supply and laying of 5\\"dia delivery line with s/f of 5\\" dia heavy duty G.I./M.S. Pipe-20 meter, 5\\" dia G.I./M.S. Bend-5 No, 5\\"dia G.I. flange-12Nos., other fittings etc, Rubber insertion-15 Kg, Nut, bolt & washer-20 Kg etc and cutting of pipe in required size, doing complete welding work for proper common header, painting of complete common header and fittings, including all labour, tools, tackle and technician charges.with CP & OHC. (Rate after deducting the scrap materials.) For both Pump sets. |
| 24 | Cost for supplying and laying of 3 Core x 25 mm2, PVC insulated and PVC sheathed unarmoured copper cable of 1.1 KV grade. From Panel to Motor in 2 length each for both motor with CP and OHC. Havells/ any reputed ISI Marked make |
| 25 | Cost for supplying and laying of 3.5 Core x 120 mm2, PVC insulated and PVC sheathed armoured aluminium cable of 1.1 KV grade. From Pole to Panel with CP and OHC. Havells/ any reputed ISI Marked make |
| 26 | Cost for excavation of earth for laying of above cable approx 15 m and back filling the same from electric pole to Main switch to Motor control panel including electrician and labour charge etc. |
| 27 | Socketing of terminal ends with s/f of terminal socket including all labour , tools and tackles. 3 Core x 25 mm2,copper cable- |
| 28 | 3.5 Core x 120 mm2 aluminium cable |
| 29 | Cost towards Supplying, Installation, Testing and Commissioning of floor/wall mounted cubical L.T Motor Control Panel fabricated with MS sheet and painted, dust and vermin proof, proper ventilated, consisting of –(a). Copper distribution 315 amp copper bus bar 4 Pole-1 set(b). Micro processor base TPN MCCB 315Amp L&T or L&K/ Siemens/BCH /Schneider make for incoming feeder – 1No., Voltmeter-1No., Ampere meter-1No. & selector switch-2 Nos. or Digital meter-1 No.(c). MCCB 200 Amp. 3ph, L&T or L&K/ Siemens /BCH/Schneider make for outgoing feeder-2 Nos.(1No for each pump sets) & 16Amp MCB feeder for lighting and utility-1No. (d). Suitable size of fully automatic star delta starter L&T or L&K/ Siemens /Schneider /BCH make -2 Nos.(e). Voltmeter-2Nos., Ampere meter-2Nos., Selector switch-4 Nos., or Digital meter, Phase indicating lamp-9 Nos., and Single Phase Preventer-2Nos., proper inside wiring with suitable size of copper wire etc all complete & testing on load. |
| 30 | Cost towards supply and fitting of 315 A Main switch heavy duty, L&T Or any reputed make including mounting / fixing of foundation bolt on wall with all materials , labour, tools, tackles and technician charges. |
| 31 | Cost for supplying and fixing of 100 watt LED flood light with bracket with all fittings and accessories etc all complete for Clear water premises. With C.P. & OHC. [Make-Havells/Syska/Mescab/Bajaj/Any reputed make.] |
| 32 | Cost for doing Chemical Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with chemical compound as required for chemical earthing. |
| 33 | Supplying and laying of 8 SWG copper wire for making earthing connection . |
| 34 | Cost towards supply and making of M.S. fabricated Gate size 6'x12'-1 No., M.S. fabricated Gate size 7'x4'-3 No with locking arrangement with fixing the same with PCC materials , other miscellenious metal repairing work, painting work etc all complete including material, making and labour charges etc all complete. (Rate after deducting the scrap materials.) |
| 35 | Cost towards Supply, installation, testing and commissioning of Blower unit of suitable capacity, coupled with 7.5HP motor operated on 415V, 3phase, 50Hz. mounted on fabricated base plate with suitable size of coupling, supplying and fitting of Pressure guage, supplying and fitting of suitable size of G.M Fullway valve-1No. etc all complete for backwash.(Rate after deducting the scrap materials). |
| 36 | Supplying all labour tools and tackles for demolition of old PCC foundation and removing all garbage from pump house and making nnew PCC foundtiaon of size 4′x2'X2′ with all materials such as cement , sand, stone chips, foundation bolt-6nos etc all complete and plastering and punning over exposed surface. |
| 37 | Cost towards laying of delivery pipe line of blower and supply and fitting of 65mm dia (or suitable dia) MS/GI Pipe18m, 65mm dia Bend-7Nos., 65mm dia Flange-10Nos.,GM Fullway valve-2Nos. with cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with CP & OHC. (Rate after deducting the scrap materials.) |
| 38 | Cost towards Supplying, Installation, Testing and Commissioning of floor/wall mounted cubical L.T Motor Control Panel fabricated with MS sheet and painted, dust and vermin proof, proper ventilated, consisting of –(a). Copper distribution 63 amp copper bus bar 4 Pole-1 set(b). Micro processor base TPN MCCB 63 Amp L&T/ Siemens /Schneider make with earth fault relay for incoming feeder – 1No., Voltmeter-1No., Ampere meter-1No. & selector switch-2 Nos.(c). MCCB 32Amp. 3ph, L&T/ Siemens /Schneider make for outgoing feeder-2 Nos.(1No for each blower set) & 16Amp MCB feeder for lighting and utility-1No. (d). Suitable size of fully automatic star delta starter L&T/ Siemens /Schneider make -2 Nos.(e). Voltmeter-2Nos., Ampere meter-2Nos., Selector switch-4 Nos., Phase indicating lamp-6 Nos., and Single Phase Preventer-2Nos., proper inside wiring with suitable size of copper wire etc all complete & testing on load. |
| 39 | Cost towards replacement of damaged square type tube settler media with new tube settler allied with required accessories etc all complete including all labour tools, tackles and technician charges. (Rate after deducting the scrap materials.) |
| 40 | Cost towards making priming arrangement for both pump set with supply and fitting of 1000 liter HDPE tank-1 No., 40 mm dia (or suitable dia) PVC Pipe-40', other required fittings such as sockets, Tap, bend/elbow, making brick base for tank etc all complete with all materials, labour, tools, tackles and technician charges. |
| 41 | Cost towards loading, unloading & transportation of old and taken out materials from Raw water p/p & Clear water p/p Barbendia to Maithan store including all labour tools tackles and technician charges. Please Enable Macros to View BoQ information |
