|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8 |
| 2 | All kinds of soil DSR 2.8 |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 4 | All kinds of soil DSR 2.10.1 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre DSR 2.10.1.2 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : DSR 4.1 |
| 8 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) DSR 4.1.4 |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)DSR 4.1.10 |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in : DSR 6.4 |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand DSR 6.4.2 |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 |
| 13 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.2 |
| 14 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR 8.2 |
| 15 | Granite of any colour and shade DSR 8.2.2 |
| 16 | Area of slab over 0.50 sqm DSR 8.2.2.2 |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 |
| 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent. DSR 9.96 |
| 19 | 250x16 mm DSR 9.96.2 |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete DSR 9.97 |
| 21 | 200x10 mm DSR 9.97.2 |
| 22 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.100 |
| 23 | 125 mm DSR 9.100.1 |
| 24 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: DSR 10.14 |
| 25 | Profile B DSR 10.14.1 |
| 26 | Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.1.1 |
| 27 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 |
| 28 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 |
| 29 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. DSR 11.56 |
| 30 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red DSR 11.56.2 |
| 31 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required DSR 12.8 DSR 12.8 |
| 32 | 12 mm cement plaster of mix : DSR 13.4 |
| 33 | 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 |
| 34 | 12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 |
| 35 | 1:3 (1 cement: 3 fine sand) DSR 13.7.1 |
| 36 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 13.88 |
| 37 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. DSR 13.81.1 |
| 38 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: DSR 14.5 |
| 39 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1 |
| 40 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR 15.2 |
| 41 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR 15.2.2 |
| 42 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : DSR 15.12 |
| 43 | Of area 3 sq. metres and below DSR 15.12.1 |
| 44 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR 15.25 |
| 45 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved DSR 15.60 |
| 46 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require DSR 17.7 |
| 47 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 48 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : DSR 17.13 DSR 17.13 |
| 49 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2 |
| 50 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. DSR 17.19 |
| 51 | 10 litre (full flush) capacity-white DSR 17.19.1 |
| 52 | Providing and fixing 8 mm dia C.P. Jet with flexible tube upto 1 metre long with triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16 |
| 53 | Area of slab over 0.50 sqm DSR 17.22A |
| 54 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete DSR 17.28 |
| 55 | Flexible pipe DSR 17.28.2 |
| 56 | 32 mm dia DSR 17.28.2.1 |
| 57 | Providing and fixing soil, waste and vent pipes DSR 17.35 |
| 58 | 100 mm dia DSR 17.35.1 |
| 59 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 DSR 17.35.1.2 |
| 60 | 75mm dia DSR 17.35.2 |
| 61 | Centrifugally cast (spun) iron socketed pipeas per IS: 3989 D SR 17.35.2.2 |
| 62 | Providing and fixing heel rest sanitary bend DSR 17.40 |
| 63 | 100 mm dia DSR 17.40.1 |
| 64 | Sand cast iron S&S as per IS - 3989 DSR 17.40.1.2 |
| 65 | Providing and fixing collar : DSR 17.57 |
| 66 | 100 mm DSR 17.57.1 |
| 67 | Sand cast iron S&S as per IS - 3989 DSR 17.57.1.2 |
| 68 | 75mm DSR 17.57.2 |
| 69 | Sand cast iron S&S as per IS - 3989 DSR 17.57.2.2 |
| 70 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 71 | 100 mm inlet and 75 mm outlet DSR 17.60.2 |
| 72 | Sand cast iron S&S as per IS - 3989 DSR 17.60.2.1 |
| 73 | Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. DSR 17.81 |
| 74 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc DSR 18.10 |
| 75 | 20 mm dia nominal bore DSR 18.10.2 |
| 76 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR 18.11 |
| 77 | 15 mm dia nominal bore DSR 18.11.1 |
| 78 | 20 mm dia nominal bore DSR 18.11.2 |
| 79 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 80 | 20 mm nominal bore DSR 18.17.1A |
| 81 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 82 | 30 cm length DSR 18.21.1 |
| 83 | 15 mm nominal bore DSR 18.21.1.1 |
| 84 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 85 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. DSR 18.53A |
| 86 | Cutting holes up to 30x30 cm in walls including making good the same DSR 18.76 |
| 87 | With common burnt clay F.P.S. (non modular) brick DSR 18.76.1 |
| 88 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : DSR 19.1 |
| 89 | 150 mm diameter DSR 19.1.2 |
| 90 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : DSR 19.2 |
| 91 | 150 mm diameter S.W. pipe DSR 19.2.2 |
| 92 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: DSR 19.4 |
| 93 | 100x100 mm size P type DSR 19.4.1 |
| 94 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.4.1.1 |
| 95 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: DSR 19.30 |
| 96 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : DSR 19.30.3 |
| 97 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 19.30.3.1 |
| 98 | Providing and fixing of Chinaware Oval shape Wash Basin Make CERA Size 560 x 470 mmx190mm including CP Waste etc complete or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 99 | Providing and fixing of Bib cock with wall flange, make Jaquar range Continental Model CON-047KN or equivalent in the same price range or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 100 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range Continental Model CON-059KN or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 101 | Providing and fixing Tank Nipple complete in all respect |
| 102 | Providing and fixing of Chinaware Urinal with sensor with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. WALTER Make kerovit size 300x335x705mm or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 103 | Construction of curb with CC 1: 2: 4 along with upto 1.00 depth for made it proof water including cost of sand , bajri complete in all respect |
| 104 | Providing and fixing ISI Marked water proof 30 mm thick flush door shutters of pine frame seasoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant , eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848;complete in all respect. |
| 105 | Providing and fixing of Soap Tray made of CP Brass/SS/ABS Plastic including glass bowl of approved make Kerovit, Cera, Jal and ESSCO |
| 106 | Dismantling of floor tiles and wall tiles complete in all respect. |
| 107 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 108 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 109 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation.i) 4\\" i/d |
| 110 | Providing and fixing of Door Closure complete in all respect |
| 111 | Providing and fixing of drip seal joints to sand cast iron/centrifugally cas (spun) iron pipes and fittings of diameter |
| 112 | 100 mm dia |
| 113 | 75 mm dia |
| 114 | Providing and fixing C.P. brass single lever basin mixer without popup complete in all respect Make Jaquar Opal 15011BPM or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 115 | Providing and fixing Water Heaters Volume 25 Ltr. Approved Make Bajaj,Cera,Racold Vertical ( Manual) Complete in all respect of approved make or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 116 | Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make |
| 117 | Providing and fixing C.P. Toilet Roll Holder complete in all respect make Jaquar range Continental Model ACN-1151N or equivalent in the same price range or AOR |
| 118 | Providing and fixing of CP/SS Long Bend /short bend for OWC |
| 119 | Providing and fixing of C.P. Towel Ring Square with round flange complete in all respects make Jaquar range Continental Model ACN-1121N or equivalent model of other approved makes in the same range of AOR to the satisfaction of EIC |
| 120 | Providing and fixing HCI P-Trap. Complete in all respect |
| 121 | Providing and fixing chinaware urinal taffon Glass partition complete in all respect. of approved make Please Enable Macros to View BoQ information |
