|
| 1 | General Notes 1. All the samples of materials which are to be used shall be approved by the department in advance. 2. The contractor shall comply with the provision of the Payment of Wages act 3. Rates quoted shall be inclusive of all cost of materials, labour, carriage, taxes, GST, labourcess, water charges, elctricity charges, seignorage charges, wastages etc.. 5. Rates quoted shall be excluding the amount of EPFO and ESIC contributions. EPFO and ESIC contributions are reimbursable on production of valid proof of payment made by the contractor as per CPWD norms. |
| 2 | Providing and laying double charged vitrified tiles in floor of size 800x800mm(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints as per specification and direction of E-I-C. |
| 3 | Providing and laying double charged vitrified tiles of size 600x1200mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per specification and direction of E-I-C. |
| 4 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work as per specification and direction of E-I-C. |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specification and direction of E-I-C. |
| 6 | Wall painting with premium acrylic emulsion paint of two coats interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour as per specification and direction of E-I-C. |
| 7 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specification and direction of E-I-C. |
| 8 | Applying priming coat With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content as per specification and direction of E-I-C. |
| 9 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per Specification and direction of E-I-C. |
| 10 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws etc as required and cleaning thorough washing, removing dirt, dust, fungus, grease, oils, loose paintings, thoroughly, sand papering etc complete with cost of material, labour, tools & plants, scaffolding etc, all as per specifications and directions of Engineer-in-charge. |
| 11 | Dismantling tile work for thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead complete as per Specification and direction of E-I-C. |
| 12 | Applying knifing paste filler over the new wooden / plywood surfaces at all heights and locations using 1st quality material of approved make in two or more coats including applying knife paste filler putty over the entire surface and finishing smooth, preparing the surface, sand papering, removing the dust, dirt etc all complete with cost of materials, labour, scaffolding, tools and plants etc as per specifications and directions of Engineer-in-charge. |
| 13 | Filling of the cracks of more than 1mm width at all floors and locations in internal walls using acrylic latex caulk crack filling compound /sealant manufactured by M/s Pegaus, M/s Fosroc, M/s Roffee or approved equivalent make including making ‘V’ shaped groove along the crack, clearing, removing all loose matter dirt and dust and applying /filling the crack filling compound as per manufacturers instruction/specifications and giving two coat of adjacent over the walls with the cost of scaffolding, all materials labour, curing, tools & plants etc., complete as per specifications and directions. Please Enable Macros to View BoQ information |
