|
| 1 | 15.7.4Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge. |
| 2 | 15.56Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead. |
| 3 | 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator)/manualmeans over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth leadupto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 4 | 4.1.8Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stoneaggregate 40 mm nominal size) |
| 5 | 5.1.2Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size). |
| 6 | 5.1.2Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size). |
| 7 | 5.2.2Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up tofloor five level, excluding cost of centering, shuttering, finishing andreinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stoneaggregate 20 mm nominal size). |
| 8 | 5.1.2Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size). |
| 9 | Centering and Shuttering including titting propping etc.for R.C.C. work 5.9.1Foundation and footing base of column |
| 10 | 5.9.5 Beams, Lintels. |
| 11 | 5.9.6Column |
| 12 | 5.9.3slab |
| 13 | 5.22.6Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | 6.1.2Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | 6.4.1Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | 10.25.2Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works |
| 17 | 13.1.212 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 18 | 8.1.1.1Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), includingpointing with white cement mortar 1:2 (1 white cement : 2 marble dust)with an admixture of pigment to match the marble shade (To be securedto the backing by means of cramps, which shall be paid for separately) |
| 19 | 11.41A2.2Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with greycement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete. |
| 20 | 13.16.16 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 21 | 13.45.1Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm)over and including priming coat of exterior primer applied@ 2.20kg/10 sqm |
| 22 | 13.61.1Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work |
| 23 | 4.1.3Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :\\"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stoneaggregate 20 mm nominal size). |
| 24 | 7.1.1Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 25 | 12.5Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating |
| 26 | 15.31Dismantling tiled roofing with battens, boarding etc.complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 27 | 15.23.1Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 28 | 12.52.1Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size |
| 29 | 9.3.2Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. |
| 30 | 9.118.325 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size |
| 31 | 9.5.1.2Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid forseparately, all complete as per direction of Engineer-in-charge |
| 32 | 9.1.2Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 33 | 18.48AProviding and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 34 | 18.8.2Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 M spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 35 | 12.41.2Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion |
| 36 | 11.33.125 mm wooden planking, tongued and grooved in flooring, including fixingwith iron screws complete with :Second class teak wood |
| 37 | SECTION RATEP/F of china glazed white wash basin with padestral type with fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 38 | SECTION RATEP/F of c.p angle cock cock with fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 39 | SECTION RATEP/F of pillar cock with fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 40 | SECTION RATEP/F of c.p wall mixture single lever exposed part fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 41 | SECTION RATEP/F of c.p soap dish holder fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 42 | SECTION RATEP/F of c.p towel rack fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 43 | SECTION RATEP/F of c.p hand jet spray fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 44 | SECTION RATEP/F of c.p over head shower fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 45 | SECTION RATEP/F of c.p 100 mm double trap floor jali fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 46 | SECTION RATEP/F of european complete seat fitting complete. Including s/o all material, labour, T&P etc complete. Required for proper completion of work. |
| 47 | SECTION RATEProviding and fixing of pine wood roof celling complete |
| 48 | SECTION RATE12 mm thick ply for false celling .including supply of all material labour t & p etc Please Enable Macros to View BoQ information |
