|
| 1 | Taking out old/defective cable XLPE/PVC sheathed 1100 volt grade heavy duty armoured with aluminium conductor cable of size 400 sqmm 3.5 core from trenches/wall under ceiling etc complete all as specified and directed. |
| 2 | All as per item No-1 above but cable size 120 sqmm 3.5 core |
| 3 | All as per item No-1 above but cable size 95 sqmm 3.5 core |
| 4 | All as per item No-1 above but cable size 70 sqmm 3.5 core |
| 5 | All as per item No-1 above but cable size 50 sqmm 3.5 core |
| 6 | All as per item No-1 above but cable size 35 sqmm 3.5 core |
| 7 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400 sq mm 3.5 core including necessary glands, lugs and required jointing materials at site, complete all as specified. |
| 8 | All as per item No-7 above but cable size 120 sq mm 3.5 core |
| 9 | All as per item No-7 above but cable size 95 sqmm 3.5 core |
| 10 | All as per item No-7 above but cable size 70 sqmm 3.5 core |
| 11 | All as per item No-7 above but cable size 50 sqmm 3.5 core |
| 12 | All as per item No-7 above but cable size 35 sqmm 3.5 core |
| 13 | Design, supply, install, testing and commissioning of factory made LT Panel Outdoor type, cubical enclosure compartmentalized external and internal mirror type brushed finish suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2.00 mm thick stainless steel sheet SS 316 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Sliding handle and locking arrangement front and rear both side. Enclosure shall be suitable for AC supply system 433 volts, 3 phase, 4 wire, 50 Hz. Degree of protection shall be IP-54. The enclosure shall have provision of cable entry. Cable entry from bottom side in seperate cable alley on both side, seperated with bakelite sheet of suitable size, including internal wiring with PVC insulated solid, copper wire, 1100 volts grade. The panel shall consist of TPN aluminium bus bars of size 1.5 time of main incomming rating switch gear and shall be provided with colour coded heat shrinkable sleeves. The panel shall be provided with separate compartments for each switch grar, including instrumentation such as Ampere meter, Volt meter, phase indicating lamps etc with double stud hinged door, front & rear openable with locking arrangement including interlocking with switch gears. The panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm, embedded 200 mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600 mm above ground level and comprising the following:(a) Panel should be according to IEC-61439, CPRI certificate Degree of protection IP-54.(b) IS/ IEC : 61439 (Part-I & Part-II) 2011 and all necessary certification as per relevant IS/IEC codes.Incomimg:-(a) Draw out type ACB 630 Amps 4 Pole, 50 kA, 50Hz at 440 Volts with (Ics=100% ICu) Microprocessor based release Electrically operated ( EF ) with overload, Short circuit, instanteneous Protection including neccessary bus bar for connection incoming cable and out going cables complete- 1 No [Make- L&T/ Legrand/ Siemens/ Schneider] ( For Main supply )(b) On load changeover switch 630 A 4 Pole, 50Hz at 440 Volts open execution including neccessary bus bar for connection incoming cable and out going cables complete [Make- L&T/ Legrand/ Siemens/ Schneider] - 1 No(c) Digital Multifunction meter to measure KWh, PF, VLL, VLN, W, VA ,V, I and WH including CT and PT complete with all electrical connection - 01 No (d) LED type Phase indicator lamps (R, Y, B) - 1 Set Outgoings:-(a) MCCB 250 Amps 3 pole rupturing capacity 36 KA at 415 volt Icu=Ics = 100% - 03 No with RHOM(b) MCCB 150 Amp,3 pole rupturing capacity 25KA at 415 volt Icu=Ics - 02 Nos with RHOM(c) MCCB 125 Amp,3 pole rupturing capacity 25KA at 415 volt Icu=Ics - 01 Nos with RHOM(d) Control MCB 6 Amps SP-03 Nos |
| 14 | Design, supply, install, testing and commissioning of factory made LT Panel Outdoor type, cubical enclosure compartmentalized external and internal mirror type brushed finish suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2.00 mm thick stainless steel sheet SS 316 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Sliding handle and locking arrangement front and rear both side. Enclosure shall be suitable for AC supply system 433 volts, 3 phase, 4 wire, 50 Hz. Degree of protection shall be IP-54. The enclosure shall have provision of cable entry. Cable entry from bottom side in seperate cable alley on both side, seperated with bakelite sheet of suitable size, including internal wiring with PVC insulated solid, copper wire, 1100 volts grade. The panel shall consist of TPN aluminium bus bars of size 1.5 time of main incomming rating switch gear and shall be provided with colour coded heat shrinkable sleeves. The panel shall be provided with separate compartments for each switch grar, including instrumentation such as Ampere meter, Volt meter, phase indicating lamps etc with double stud hinged door, front & rear openable with locking arrangement including interlocking with switch gears. The panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm, embedded 200 mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600 mm above ground level and comprising the following:Incomimg:-(a) MCCB 315 Amp, 4 pole rupturing capacity 25 KA at 415 volt Icu=Ics = 100% - 01 Nos with RHOM(b) Digital Multifunction Meter to measure KWh, PF, VLL, VLN, W, VA ,V, I including CT and PT complete with all electrical connection - 01 No (c) LED type Phase indicator lamps (R, Y, B) - 1 Set Outgoings:-(b) MCCB 160 Amp, 3 pole rupturing capacity 16KA at 415 volt Icu=Ics = 100% - 02Nos with RHOM(b) MCCB 125 Amp, 3 pole rupturing capacity 16KA at 415 volt Icu=Ics = 100% - 02 Nos with RHOM |
| 15 | Design, supply, install, testing and commissioning of factory made LT Panel Outdoor type, cubical enclosure compartmentalized external and internal mirror type brushed finish suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2.00 mm thick stainless steel sheet SS 316 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Sliding handle and locking arrangement front and rear both side. Enclosure shall be suitable for AC supply system 433 volts, 3 phase, 4 wire, 50 Hz. Degree of protection shall be IP-54. The enclosure shall have provision of cable entry. Cable entry from bottom side in seperate cable alley on both side, seperated with bakelite sheet of suitable size, including internal wiring with PVC insulated solid, copper wire, 1100 volts grade. The panel shall consist of TPN aluminium bus bars of size 1.5 time of main incomming rating switch gear and shall be provided with colour coded heat shrinkable sleeves. The panel shall be provided with separate compartments for each switch grar, including instrumentation such as Ampere meter, Volt meter, phase indicating lamps etc with double stud hinged door, front & rear openable with locking arrangement including interlocking with switch gears. The panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm, embedded 200 mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600 mm above ground level and comprising the following:Incomimg:-(a) MCCB 250 Amp, 4 pole rupturing capacity 25 KA at 415 volt Icu=Ics = 100% - 01 Nos with RHOM(b) Digital Multifunction Meter to measure KWh, PF, VLL, VLN, W, VA ,V, I including CT and PT complete with all electrical connection - 01 No (c) LED type Phase indicator lamps (R, Y, B) - 1 Set Outgoings:-(a) MCCB 160 Amp, 3 pole rupturing capacity 25KA at 415 volt Icu=Ics = 100% - 02 Nos with RHOM Note for item No 13 to 15: (i) Rates are inclusive for fixing of suitable size cable gland if required in existing or new cable, CT/ PT and elctrcal connection complete to function multi functional meter. (ii) Danger notice plate must be fixed on panel . (iii) The manufacturer should have Govt. approved certificates:-(a) Panel should be according to IEC-61439, CPRI certificate Degree of protection IP-54.(b) IS/ IEC : 61439 (Part-I & Part-II) 2011 and all necessary certification as per relevant IS/IEC codes. |
| 16 | Design, supply, install, test & commissioning of factory made AMF Panel board suitable for carrying current up to 110% of full load of 160KVA DG set [Make: Mahindra & Mahindra], having IP 54 protection, Out door type, free standing, floor mounted, dust and vermin proof, cubical type, made out of SS sheet (SS-316) 2.0 mm thick and shall be mirror finished internally and externally, totally enclosed with front and rear opening, hinged doors, locking arrangements. [ Panel - CPRI Approved or OEM of manufacturere of DG set)Control panel shall be provided with suitable internal wiring with copper cable of suitable size, main contactors with 415/ 433 Volt coil, switch gears (4 pole MCCB in incoming and out going with Ics = 100% Icu) , copper bus bars with colour coded heat shrinkable PVC sleeves with suitable inter connecting copper wire DG supply and main supply / copper strips, control wires, relays, timers, bakelite control fuses, measuring devices such as Voltmeter, Ammeters both for AC & DC, mulitifunction meter for displaying various parameters of DG sets all as required & current transformer of suitable ratio, Selector switches, HRC fuses, earth bus and bolts etc. The panel shall be with standard functional system with necessary accessories for automatic start of DG set on main supply failure and stop when mains restore after necessary cooling. The control panel shall be provided with standard over load relay, indicating lamps and manual control switches / push button switches for DG Set ON / OFF, DG Contactor ON / OFF, Mains Contactor ON / OFF, RESET, ACK, TEST, TRIP with indicating lamps, including battery charging system with rectifier bridge, transformer of suitable size and capacity to charge batteries trickle / boost and unbalanced voltage tripping system all as specified including taking out of old panel complete all as specified and as directed by the Engineer - in - Charge.Note : The Out door AMF panel shall be with by pass arrengements with BOTH MAINS AND DG SUPPLY by on load chageover switches of same rating as per MCCB. The panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm, embedded 200 mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600 mm above ground level |
| 17 | M&L for conductive concrete Earth grid of multiple interconnected Earth Electrodes to achieve the earth resistance value of less than <1 ohm. The excavation is to be carried out in any type of soil including hard rock. The approx specification are as under:-(i) Earth Electrodes: Metal conductor - Copper bonded MS rod dia 17.2 mm (+/-5mm). Length 2.25 meter with conductive concrete including provision of bore 80 mm dia, 2.25 meter length of earth electrode.(ii) All required earth electrode (min two Nos) should be installed to achieved the desired result.(iii) Interconnected strip: All the multiple Earth Electrodes will be horizontally interconnected with metal conductor-Copper strip flat size : 25mm x 3mm & conductive concrete embedding size 60 mm Sqmm.(iv) Test Link: Test links - Copper strip flat size 40mm x 6mm x 200 mm shall be provided, at any one of the multiple Earth Electrodes of the grid for connection betwee earth grid pit and application.(v) Pit Cover: RCC pit cover & frame shall be provided at all Earth Electrode (with test links). |
| 18 | Supply and fixing cable tray 300 width and 50mm height made out of perforated 16 SWG GI sheet hot dip galvanising cable tray including necessary fixing arrangements required at site and making good of disturbed surface of the following size:- (Note- MS work such as angle iron / channel etc shall be measured and paid seperately under the respective item of schedule) |
| 19 | Supply and fixing cable tray 600 width and 50mm height made out of perforated 16 SWG GI sheet hot dip galvanising cable tray including necessary fixing arrangements required at site and making good of disturbed surface of the following size:- (Note- MS work such as angle iron / channel etc shall be measured and paid seperately under the respective item of schedule) |
| 20 | S&F mild steel work in framed work such as frame ,straps, Ties Clamps,angle iron frame suitable for cable tray fixing including necessary fixing arrangments of cable tray,nut bolts fastnerand GI sheet coupler etc and similar work confirming to Fe-290 Gde E-165 and incl painting to surfaces using two coats of metallic primer and a coat of super enamelled paint of desired colour complete all as specified and directed. |
| 21 | Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed. |
| 22 | Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 23 | Supply and laying un-reinforced precast concrete cable cover class LV, Type I, flat, size 250mm x 150mm x 40 mm complete all as specified and as directed. |
| 24 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed. |
| 25 | Removing excavated material n exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 26 | Supply and laying in replacement 80mm bore GI tube light grade as in cable protection pipe including all fittings complete all as specified and directed. |
| 27 | Supply and laying in replacement 50mm bore GI tube light grade as in cable protection pipe including all fittings completeall as specified and directed. |
| 28 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed. |
| 29 | M &L Point wiring using approved colour coding as per IS, with stranded copper conductor FRLSH 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade,ISI-694 marked in and including heavy duty, PVC concealed conduit after chasing the wall etc and making good of disturbed surface including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes duly powder coated with earth dolly duly, covered with modular plates suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly. (Note- switch and sockets will be measured and paid seperately under the respective item of sch ) |
| 30 | All as per item No-29 above but one fan/exhaust fan and wall mounted fan point controlled by one SP switch. |
| 31 | All as per item No-29 above but for one 3 pin socket out let, 6 Amps on Independent board |
| 32 | All as per item No-29 above but for one 3 pin socket out let, 6 Amps on same board |
| 33 | All as per item No 29 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge. |
| 34 | S&F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed. |
| 35 | S&F Modular Socket, 6A - 3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed . |
| 36 | S&F Modular switch 1 way 16A, 1 modules suitable for 240 volt AC Complete all as specified and directed . |
| 37 | S&F Modular Socket, 16A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed. |
| 38 | Supply and fix electronic modular fan regulator rotary flush step type 120 watt, 240 volt complete complete all as specified and directed. . |
| 39 | S&F Ceiling roses, surface bakelite 65mmx50mm 2 or 3 terminals , PVC/ Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed. |
| 40 | Taking down wall mounting fan of any size dismantling blades and removing fan and blades to and deposit to MES store after making serviceable Complete all as specified and directed. |
| 41 | S&F wall mounted fan of 400 mm sweep, 03 blades aerodynamically balanced with 60 degree oscillation, air delivery not less than 55 M3/Min, 1350 RPM, 230 V, 50Hz and Noise level not more than 64 dB with 2 years warranty complete all as specified and directed.including necessary fixing arrangement for proper fixing in wall as per site requirement complete all as specified. |
| 42 | Servicing and cleaning of wall mounted fan received from item no 40 and refixing including electrical connection complete all as specified and directed. |
| 43 | Taking down exhaust fan of any size dismantling blades and removing fan and blades to and deposit to MES store after making serviceable Complete all as specified and directed. |
| 44 | S & F heavy duty exhaust fan 300mm sweep, speed 1400 RPM, corrossion less mild steel body of motor, plastic/fibre blade for noise less operation, self operating louvers gives powerful performance round the clock, 230/240 volts single phase complete including making opening of suitable size of wall, grouting bolts and making good the distrubed surfaces and connection with 1.5 sqmm copper conductor flexible wire from ceiling rose to fan complete all as specified and directed. |
| 45 | Servicing and cleaning of exhaust fan received from item no 43 and refixing including electrical connection complete all as specified and directed. |
| 46 | Taking down Ceiling fan of any size dismantling blades and removing fan and blades to and deposit to MES store after complete all as specified and directed. |
| 47 | Supply & fix energy efficient BLDC ceiling fan 1200mm sweep , 28 Watt with remote , ISI mark with 5 star rating , white colour, single phase including all fixing arrangement hanging in roof like suitable size of fan road clips , bolt , nut , washers and 3 core flexible copper wire of size 1.5 sqmm not less than 0.5mtr long with all accessories complete all as specified and as directed. |
| 48 | Refixing of ceiling fan received from item No 46 of any size sweep after cleaning, servicing and painting with enammeled paint with paint gun (white Paint) complete , replacing the unserviceable minor parh i.e rubber real and clamp, canopy and rod complete all as specified and directed. Note : Rate are inclusive for minor spare parts and painting work under this items . |
| 49 | Supply and fixing LED luminaire 600 mm x 600 mm, intellegent, modular high efficacy with integrated PIR sensor for autonomous operation ,35/36 watt, 4000K, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size with THD<10% complete all as specifed and directed .(Make Havells Cat No VENUSNEOHE2X2R36WLED830PIRSENSOR / same type in Philips/Bajaj/Crompton/WIPRO |
| 50 | Supply and fixing LED lights fitting 1x 20W, 6500 K, THD<10% 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 51 | Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt, 6500k, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 52 | Taking down unserviceable submain wiring of alluminium two/three runs of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and complete all as specified and directed. |
| 53 | M & L for submain wiring with two run of single core 10.0 sqmm PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 10.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. Note; - 2 Runs of 10.0 Sqmm single core and one run of 10.0 sqmm single core cable. |
| 54 | M & L for submain wiring with two run of 6.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. Note: - 2 Runs of 6.0 Sqmm single core and one run of 6.0 sqmm single core cable. |
| 55 | M & L for submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. Note:- 2 Runs of 4.0 Sqmm single core and one run of 4 sqmm single core cable. |
| 56 | S&F MCB DB VTPN 4 ways with provision for FP MCB/isolator/RCCB/MCCB etc as incomer and SP/TP MCBs as out going double door IP 54 complete prewired including Bus bar etc suitable for operation on 415 Volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/Stone masonary etc and making good of disturbed surface to match with existing colour of wall including MCCB 4 poles 160 Apms Capacity, rup capacity 10 KA (Ics = 100% Icu) complete all as specified and as directed. (Note- MCB SP/TP shall be measured and paid seperately) |
| 57 | Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 12 way 230 volts double door type horizontal type complete all as specified and as directed. Note :- MCB shall be measured and paid seperately. |
| 58 | Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link ,earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type complete all as specified and as directed. Note :- MCB shall be measured and paid seperately. |
| 59 | Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 4 way 230 volts double door type horizontal type complete all as specified and as directed . Note :- MCB shall be measured and paid seperately. |
| 60 | Supply and Sheet metal enclosure single pole and neutral with two pin and earth plug and socket 20 Amps compete with one SP MCB 20 Amps fixed flush in wall including cutting chases in wall for fixing DB and making good the disturbed wall surface to match with existing specification complete all as specified and directed. |
| 61 | Taking down unserviceable SP/ SPN MCBs of any capacities from the MCB DBs after disconnecting the electric supply complete all as specified and directed. |
| 62 | S&F MCB SPN 32 Amps 10 KA, 240 volt 50 Hz 'C' Series all as specified and directed . |
| 63 | S&F MCB SPN 40 Amps 10 KA, 240 volt 50 Hz 'C' Series all as specified and directed. |
| 64 | S&F MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed. |
| 65 | Material and labour for Design, development, supply, testing & commissioning of EHCC certified ground tubular effective Tripod type chemical earthing system ( CPRI tested for 15 KA current capacity for LT line) highly anti-corrosive, long life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 50x6x200mm earthing electrode strip both side 2 nos, qty 3 nos strip size 25x3x3000mm both side 2 nos and primary conductor and hollow Copper coated tube of dia 76mm x 3mtrs long as secondary conductor to install with suitable connection terminal conforming of IS 3043:1987 (latest revised) specifications, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation 225 kg strip compound Bags minimum or sufficient quantities required as per site complete including HDPE earthing pit cover size 300x300x260 mm suitable cover, material and labour including testing after completion and result should be less than one Ohm complete all as specified and directed. Please Enable Macros to View BoQ information |
