|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres All kinds of soil. |
| 2 | Providing and laying stone soling hand packed including spreading ,watering and maintaining level Including cost of material involved complete. |
| 3 | Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: Including cost of material involved complete. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering and shuttering. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete in sub-structure and super structure Thermo-Mechanically Treated bars of grade Fe-500D or more. Including carriage and head load. |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 9 | Centering and Shuttering including strutting, propping etc and removal of formwork in Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Centering and Shuttering including strutting, propping etc and removal of formwork for Suspended floors, roofs, landings, balconies and access platforms. |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level including all carriage of material complete. |
| 12 | Supply and filling of RBM inside rooms including spreading, watering with all carriage etc complete |
| 13 | 12mm Cement plaster of mix: ( 1 cement : 6 fine sand) |
| 14 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 15 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 16 | Structural steel work welded in built up sections in frames of door, vent including cutting, hoisting fixing in position all complete in angles / flats / tubes etc. including fixing of 2mm thick MS sheets in Door shutters including ms frame work.incl cost of steel primer and Paint complete. |
| 17 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 18 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 19 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 20 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 23 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 24 | Providing and fixing one concealed light point controlled by one switch, complete with all accessories, and fittings as per specifications and as directed by the Engineer-in-Charge. |
| 25 | Providing and fixing concealed type light box of required size in wall/ceiling for installation of light fitting / ceiling rose, including cutting and making good the surface, complete as per specifications and as directed by the Engineer-in-Charge. |
| 26 | Providing and fixing concealed type switch box complete with modular plate, 6A modular switch and LED indicator light, including all accessories, cutting and making good the surface, complete as per specifications and as directed by the Engineer-in-Charge. |
| 27 | Providing and laying rigid PVC conduit of required size in RCC slab for concealed light wiring, including necessary accessories and fixing in position before concreting, complete as per specifications and as directed by the Engineer-in-Charge. |
| 28 | Providing and drawing 1.0 sq.mm PVC insulated copper conductor FRLS wire through existing PVC conduit for light point wiring, including connections, testing and commissioning, complete as per specifications and as directed by the Engineer-in-Charge. |
| 29 | Providing and fixing Miniature Circuit Breaker (MCB) of required rating in existing distribution board for protection of light/power wiring circuit, complete with connections, testing and commissioning as per specifications and as directed by the Engineer-in-Charge |
| 30 | Drainage Disposal System |
| 31 | Providing and fixing of cement concrete rings incl cost of E/w incl. cost of head load complete job.( Including Cement Concrete Cap). Dia of Ring 4 feet. |
| 32 | Providing and fixing type B PVC (Prince Make) pipe including cost of rubber washer and adhesive complete as per direction of Engineer-in-Charge. 100 mm dia |
| 33 | Providing and fixing type B PVC (Prince Make) pipe including cost of rubber washer and adhesive complete as per direction of Engineer-in-Charge. 75 mm dia |
| 34 | Providing and fixing PVC (Prince Make) following fitings including cost of rubber washer and adhesive complete as per direction of Engineer-in-Charge. |
| 35 | PVC Collar 100mm |
| 36 | PVC Reducer 100 x 75 mm |
| 37 | Plain Bend 100 mm size |
| 38 | Plain Bend 75mm size |
| 39 | PVC Clamps (100/75 mm) |
| 40 | PVC Cowell 75 mm size (100/75 mm) |
| 41 | Floor trap 100 mm Size |
| 42 | Floor trap 75 mm Size |
| 43 | Sanitary and Plumbing |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 45 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 Pipe, 16 mm OD (SDR-7.4) |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 Pipe, 25 mm OD (SDR-7.4) |
| 47 | Providing and fixing PPR Union 20mm dia |
| 48 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 49 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 50 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 51 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 52 | Providing and fixing following C.P. fittings of standard quality and approved make including all fixtures needed to make them functional etc complete job as per directions of Enginner-in-Charge. |
| 53 | Bib Cock |
| 54 | Angle Valve |
| 55 | Basin cock |
| 56 | Soap Container |
| 57 | Toilet Paper Holder |
| 58 | Grating |
| 59 | Ball Valve |
| 60 | Stainless Steel gate valve |
| 61 | Health Faucet |
| 62 | Carriage for different materials: |
| 63 | Sand average lead of 10 Kms |
| 64 | Stone Aggregate average lead of 10 kms. Please Enable Macros to View BoQ information |
