|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil : |
| 2 | ii. Ordinary Rock |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. i. All kinds of soil : |
| 4 | ii. Ordinary Rock |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:i. All kinds of soil : |
| 6 | Extra for additional lift of 1.5 mtr or part thereof in excavation/banking excavated or stacked material.i. In all kinds of soils. |
| 7 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). i. Depth not exceeding 1.5 m. |
| 8 | ii. Depth exceeding 1.5m but not exceeding 3 m |
| 9 | iii. Depth exceeding 3 m but not exceeding 4.50 m |
| 10 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): i. Depth not exceeding 1.5 m. |
| 11 | ii. Depth exceeding 1.5 m but not exceeding 3 m |
| 12 | iii. Depth exceeding 3 m but not exceeding 4.50 m |
| 13 | Supply and filling of 2nd class sand / stone dust around pipes at different spots including cost of material i.e. stone dust from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing and watering including compaction after each 15cms thickness in all respects. Complete Job. (Subject to actual quantities during execution). |
| 14 | Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job. |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (Subject to actual quantities during execution). |
| 16 | Disposal of surplus excavated material by mechanical transport including loading, unloading & stacking. i. For an avg lead of 1km. |
| 17 | i. For an avg lead of 2km. |
| 18 | ii. For an avg lead of 3km. |
| 19 | iii. For an avg lead of 4km. |
| 20 | For an avg lead of 5km. |
| 21 | Dismantling of 1200mm dia PSC pipe excluding excavation & refilling trenches after taking out pipe manually / mechanically by breaking into pieces, stacking of pieces within a specified lead as per the directions of Engineer -in-Charge including cutting of damaged ends & preparing the same for refitting including heating & lighting arrangements. (Deductions on account of use of departmental men and machinery shall be as per actual) |
| 22 | Removing of MS Step Collar at leakage spot by way of engaging fitters/ labours including cutting of nuts and bolts, lighting & heating arrangements. Complete Job. (Deductions on account of use of departmental men and machinery shall be as per actual) |
| 23 | Providing, fixing of MS Step Collars, Clips, etc. of suitable degrees/size to be fabricated out of MS plate as per the requirement of site. This item includes cost of lead, spun yarn & lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof & should be painted with anticorrosive red oxide primer & bituminous paint & including all carriages, leads & lifts, etc. complete. The work is to be conducted in harsh & cold nights also.For 1200/750/700mm dia Pipe : 10mm Thick For 500/450/300/150mm dia Pipe: 8mm Thicki. Providing & fixing of 1200mm dia MS Pipe i.e. 2 No. End pieces & 1 No. Central piece in proper position with the help of tightening jacks,etc. complete including cutting to size & tailoring of gap piece to required size including grinding of two end pieces. Job includes setting right of minor ovalities in the end pieces. |
| 24 | ii. For 750/700mm dia CI/DI Pipe |
| 25 | iii. For 500/450/350/300/200/150mm dia CI/DI pipe. |
| 26 | Arch welding of MS Barrel pieces of 1200mm dia pipe inside & outside in multiple layers to make leak proof joint & suitable to resist 10kg/cm² including the cost of welding rods, usage of generator & other machines, etc. with all sorts of carriage charges upto the site of work. Complete |
| 27 | Providing, dumping, laying of stone boulders in position, hand packed in horizontal level in required thickness to strengthen the pipe against further settlement including all leads & lifts & carriage charges all complete as per the directions od Engineer-in-Charge. |
| 28 | Arresting of leakages in 1200/750/700/ 500/450/ 300/200/150mm dia pipelines by way of lead beating all along the joint using iron caulking tool including providing of lead caulked joints wherever necessary including cost of lead, spun yarn, fire wood, kerosene, etc. with all carriages complete. This job includes engagement of fitters/labours, etc. involved for rectification of leakages including heating & lighting arrangement. i. 1200mm dia PSC Pipe |
| 29 | ii. 750/700mm dia CI/DI Pipe |
| 30 | iii. 500/450mm dia CI/DI pipe |
| 31 | i. 350/300mm dia CI/DI Pipe |
| 32 | 200/150mm dia CI/DI Pipe |
| 33 | Arresting of leakages in 1200/750/700/500/450/ 300/200/150mm dia pipelines by way of providing, making & fixing of deodar wooden wedge shaped pegs made out of logs including all carriages complete. This job includes engagement of fitters/carpenters/labours, etc. involved for rectification of leakage including heating & lighting arrangement. I. 1200mm dia PSC Pipe. |
| 34 | I. 750/700mm dia CI/DI Pipe |
| 35 | II. 500/450mm dia CI/DI pipe |
| 36 | III. 350/300mm dia CI/DI Pipe |
| 37 | 200/150mm dia CI/DI Pipe |
| 38 | Applying high bond strength water proofing adhesive on the joints to make it leakage proof including the cost of water proofing compound & incl all carriage charges. i. 1200mm dia PSC Pipe. |
| 39 | 750/700mm dia CI/DI Pipe |
| 40 | iii. 500/450mm dia CI/DI pipe |
| 41 | i. 350/300mm dia CI/DI Pipe |
| 42 | 200/150mm dia CI/DI Pipe |
| 43 | Applying white cement on the joints to make it leakage proof including the cost of white cement & incl all carriage charges. i. 1200mm dia PSC Pipe. |
| 44 | i. 750/700mm dia CI/DI Pipe |
| 45 | ii. 500/450mm dia CI/DI pipe |
| 46 | iii. 350/300mm dia CI/DI Pipe |
| 47 | 200/150mm dia CI/DI Pipe |
| 48 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. i. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 49 | Repairing of MS Sluice Chambers by way of welding including providing & fixing of petty items like hinges, locks, handles, etc. The job includes engagement of welder, transportation of welding unit upto the site of work. Complete Job. |
| 50 | Making Inter-connection between Sub Mains of various dias with Trunk Main of various dias including cost of pipe specials as per requirement including cutting & threading of pipe. Complete (20-50mm nominal bore). |
| 51 | Maintenance/servicing of Sluice Valves/Butterfly Valves/Gate Valves by way of dismembering of valve assembly and replacement of nuts and bolts by stainless steel nuts and bolts and replacement of worn out parts by new ones if required at site incl. greasing , etc all complete . The entire assembly is to be re-fixed in its original position after carrying out necessary repairs. The job includes all carriages of materials, tools and plants and shall be paid in fitted and fixed form after testing on full water load and successful commissioning. Complete job. I. 900 mm dia Sluice Valve |
| 52 | I. 600 mm dia Sluice Valve |
| 53 | II. 500/450 mm dia Sluice Valve |
| 54 | III. 350/300 mm dia Sluice Valve |
| 55 | 200/150 mm dia Sluice Valve |
| 56 | Repairs/rethreading/replacement of sluice rod and providing of new check nut made of gun metal and replacement of worn out parts by new ones if required at site incl. all complete . The entire assembly is to be re-fixed in its original position after carrying out necessary repairs. The job includes all carriages of materials, tools and plants and shall be paid in fitted and fixed form after testing on full water load and successful commissioning. Complete job. I. 900 mm dia Sluice Valve |
| 57 | I. 600 mm dia Sluice Valve |
| 58 | II. 500/450 mm dia Sluice Valve |
| 59 | III. 350/300 mm dia Sluice Valve |
| 60 | 200/150 mm dia Sluice Valve |
| 61 | Providing of rejection wood/ firewood for heating purposes during night operations including kerosene oil as required at site. |
| 62 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 63 | ii. 1:2:4 (1 cement 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 64 | iii. 1:3:6 (1 cement 3 coarse sand : 6 graded stone aggregate 20 mm nominal size. |
| 65 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of cantering, shuttering, finishing and reinforcement. All works upto plinth level.i. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate) 20 mm nominal size |
| 66 | ii. 1:2:4 (1 cement: 2 course sand : 4 graded stone aggregate) 20mm nominal size. |
| 67 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 68 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade |
| 69 | Centering and shuttering including strutting, propping etc. and removal of form for: i. Columns, pillars, piers, abutments, posts and struts. |
| 70 | ii. Stairs (excluding landings) except spiral staircases. |
| 71 | iii. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 72 | iv. Suspended floors, roofs, landings, balconies and access platforms. |
| 73 | v. Arches, domes, vaults upto 6 m span. |
| 74 | vi. Foundations, footings, bases of columns etc. for mass concrete. |
| 75 | vii. Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 76 | Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. |
| 77 | Carriage of materials by mechanical transport including loading, unloading and stacking from source upto site of work.i. Stone Soling (Avg. lead 15 Kms) |
| 78 | i. 40mm Agg. (Avg. lead 15 Kms) |
| 79 | ii. 20mm Agg. (Avg. lead 15 Kms) |
| 80 | iii. Sand (Avg.lead of 15 Kms) |
| 81 | Cement & Steel (Avg. lead 8 Kms) |
| 82 | Carriage of pipes / sluice valves from divisional store to site & any leftover / retrieved pipes / sluice valves or any other deptt. Material from site to divisional store including loading, unloading, stacking etc. |
| 83 | Carriage of materials by mechanical transport including loading, unloading and stacking from Div. Store upto the site of work.i. DI/MS Pipe, Pipe Specials for an avg. lead of 7Kms. |
| 84 | Providing refreshment to supervisory staff & departmental labour for prolonged/continuous operation of repair/ restoration/ maintenance work of pipelines. Complete job including packing with following Menu.i. Water Bottle One litre |
| 85 | i. Water Bottle 500 ml |
| 86 | ii. Water bollte 250 ml |
| 87 | iii. Juice pac/ tin 100 ml to 180 ml of Standard Quality |
| 88 | iv. Boiled Egg/Omelete |
| 89 | v. Biscuit standard Quality of 50g |
| 90 | vi. Banana |
| 91 | vii. Butter Toastes each pair |
| 92 | viii. Toastes without Butter each pair |
| 93 | ix. Tea Sugar each Cup |
| 94 | x. Tea Namkeen each Cup |
| 95 | xi. Normal Chicken Biryani one plate for each person |
| 96 | Rice Plate with vegetables, Single piece meat for each person. |
| 97 | Supply of labours. i. Skilled |
| 98 | i. Unskilled |
| 99 | ii. Motor Mechanic |
| 100 | iii. Electrician |
| 101 | iv. Carpenter |
| 102 | v. Mason |
| 103 | vi. Chowkidar |
| 104 | vii. Fitter |
| 105 | viii. Asstt. Fitter |
| 106 | Supply of lead, spun Yarn, Fire Wood, Kerosene, Mild steel plates including all carriages upto site of work.i. Lead |
| 107 | i. Spun Yarn |
| 108 | ii. Fire Wood |
| 109 | iii. Kerosene |
| 110 | Mild steel plate |
| 111 | Arresting of leakage in G.I pipes by way of providing, laying & fitting of pipe & pipe specials including cutting & threading of pipe, complete with all sorts of carriage upto the site of work.i. 80mm dia Pipe |
| 112 | i. 65mm dia Pipe |
| 113 | ii. 50mm dia Pipe |
| 114 | iii. 40mm dia Pipe |
| 115 | iv. 25mm dia Pipe |
| 116 | 20mm dia Pipe |
| 117 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.i. One or more coats on old work. |
| 118 | Lettering with black Japan paint of approved brand and manufacture. |
| 119 | Hire charges for:i. Concrete breaker |
| 120 | i. JCB Driver |
| 121 | Generator |
| 122 | Supply of various T & P articlesi. Long boots (water proof) |
| 123 | i. Bucket 15 ltr |
| 124 | ii. Mug |
| 125 | iii. Showel |
| 126 | iv. Raincoat with trouser (water proof) |
| 127 | v. Pick axe |
| 128 | vi. Hoe |
| 129 | vii. Gloves |
| 130 | viii. Rope |
| 131 | ix. Axe |
| 132 | x. Digging bar |
| 133 | xi. Lock |
| 134 | xiii. Wrencha. 24 inch |
| 135 | a. 18 inch |
| 136 | b. 14 inch |
| 137 | c. 12 inch |
| 138 | i. Socket set tool kit |
| 139 | ii. Hammer |
| 140 | iii. L-Key set |
| 141 | Safety ribbon/Caution tape(100- 200 metre) |
| 142 | Engagement of JCB, including cost of POL, Driver |
| 143 | Hire & running charges of tipper |
| 144 | Providing and fixing of extension rod made out of 32mm round or square MS bar welded with turning / locking head as per size of sluice rod, operating wheel with all carriages and head load upto actual site of work all complete. |
| 145 | Welding incuding transportation of plant at site etc. complete.i. By gas plant |
| 146 | Applying priming coat: i. With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works. |
| 147 | ii. With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat). |
| 148 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:i. Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture. |
| 149 | Providing, fixing of M.S flanges by welding including cost of cutting making both holes made out of 10/14mm thick M.S plate to the pipes of different dia’s and including cost of nuts, bolts, washers etc. (Complete Job).i. 80mm dia |
| 150 | i. 100mm dia |
| 151 | ii. 150mm dia |
| 152 | iii. 200mm dia |
| 153 | iv. 250mm dia |
| 154 | v. 300mm dia |
| 155 | vi. 400mm dia |
| 156 | vii. 450mm dia |
| 157 | viii. 500mm dia |
| 158 | ix. 600mm dia |
| 159 | x. 700mm dia |
| 160 | xi. 750mm dia |
| 161 | xii. 800mm dia |
| 162 | 900mm dia |
| 163 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. i. 15 mm and 20 mm dia. G.I. pipes |
| 164 | i. 25 mm and 32 mm dia. G.I. pipes |
| 165 | iii. 40 mm and 50 mm dia. G.I. pipes |
| 166 | iv. 65 mm and 80 mm dia. G.I. pipes |
| 167 | v. 100 mm and 150 mm dia. G.I. pipes |
| 168 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light Class.a. 15 mm dia. nominal bore |
| 169 | a. 20 mm dia. nominal bore |
| 170 | b. 25 mm dia. nominal bore |
| 171 | c. 32 mm dia. nominal bore |
| 172 | d. 40 mm dia. nominal bore |
| 173 | e. 50 mm dia. nominal bore |
| 174 | f. 65 mm dia. nominal bore |
| 175 | g. 80 mm dia. nominal bore |
| 176 | 100 mm dia. nominal bore |
| 177 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete a. 15mm nominal bore. |
| 178 | a. 25 to 40 mm nominal bore |
| 179 | 50 to 80 mm nominal bore |
| 180 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. a. 15 mm nominal bore |
| 181 | a. 20 mm nominal bore |
| 182 | b. 25 mm nominal bore |
| 183 | c. 32 mm nominal bore |
| 184 | d. 40 mm nominal bore |
| 185 | e. 50 mm nominal bore |
| 186 | f. 65 mm nominal bore |
| 187 | 80 mm nominal bore |
| 188 | Providing of GI Pipe fittings of ISI / reputed make (Subject to actual quantities during execution).A. Elbowa. 100mm dia |
| 189 | a. 80mm dia |
| 190 | b. 65mm dia |
| 191 | c. 50mm dia |
| 192 | d. 40mm dia |
| 193 | e. 25mm dia |
| 194 | 20mm dia |
| 195 | B. Union of ISI marka. 100mm dia |
| 196 | a. 80mm dia |
| 197 | b. 65mm dia |
| 198 | c. 50mm dia |
| 199 | d. 40mm dia |
| 200 | e. 25mm dia |
| 201 | f. 20mm dia |
| 202 | C. Socket of ISI marka. 100mm dia |
| 203 | a. 80mm dia |
| 204 | b. 65mm dia |
| 205 | c. 50mm dia |
| 206 | d. 40mm dia |
| 207 | e. 25mm dia |
| 208 | f. 20mm dia |
| 209 | D. Equal Tee of ISI marka. 100mm dia |
| 210 | a. 80mm dia |
| 211 | b. 65mm dia |
| 212 | c. 50mm dia |
| 213 | d. 40mm dia |
| 214 | e. 25mm dia |
| 215 | f. 20mm dia |
| 216 | E. Reducer Socket of ISI marka. 100 to any smaller size GI |
| 217 | a. 80 to any smaller size GI |
| 218 | b. 65 to any smaller size GI |
| 219 | c. 50 to any smaller size GI |
| 220 | d. 40 to any smaller size GI |
| 221 | e. 25 to any smaller size GI |
| 222 | f. 20 to any smaller size GI |
| 223 | F. Plug of ISI marka. 100mm dia |
| 224 | a. 80mm dia |
| 225 | b. 65mm dia |
| 226 | c. 50mm dia |
| 227 | d. 40mm dia |
| 228 | e. 25mm dia |
| 229 | a. 20mm dia |
| 230 | G. Nipple of ISI mark (avg. 4 inch length)g. 100mm dia |
| 231 | a. 80mm dia |
| 232 | b. 65mm dia |
| 233 | c. 50mm dia |
| 234 | d. 40mm dia |
| 235 | e. 25mm dia |
| 236 | 20mm dia |
| 237 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 238 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. a. Riveted and bolted |
| 239 | b. Welded |
| 240 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. I. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 241 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. i. Hot finished welded type tubes |
| 242 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) |
| 243 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. i. 150 mm dia pipes |
| 244 | i. 200 mm dia pipes |
| 245 | ii. 250 mm dia pipes |
| 246 | iii. 300 mm dia pipes |
| 247 | iv. 350 mm dia pipes |
| 248 | v. 400 mm dia pipes |
| 249 | vi. 450 mm dia pipes |
| 250 | vii. 500 mm dia pipes |
| 251 | viii. 600 mm dia pipes |
| 252 | ix. 650 mm dia pipes |
| 253 | 700 mm dia pipes |
| 254 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : i. 15 mm to 40 mm nominal bore. |
| 255 | ii. Above 40 mm nominal bore |
| 256 | Dismantling C.I. pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineerin-charge. i. Including excavation and refilling trenches after taking out the pipes. a. Above 300 mm diameter. |
| 257 | ii. Excluding excavation and refilling trenches after taking out the pipes. a. Above 300 mm diameter. |
| 258 | Labour for cutting C.I/D.I pipe with steel saw. i. 80 mm diameter C.I. pipe |
| 259 | i. 100 mm diameter C.I. pipe |
| 260 | ii. 125 mm diameter C.I. pipe |
| 261 | iii. 150 mm diameter C.I. pipe |
| 262 | iv. 200 mm diameter C.I. pipe |
| 263 | v. 250 mm diameter C.I. pipe |
| 264 | vi. 300 mm diameter C.I. pipe |
| 265 | vii. 350 mm diameter C.I. pipe |
| 266 | viii. 400 mm diameter C.I. pipe |
| 267 | ix. 450 mm diameter C.I. pipe |
| 268 | x. 500 mm diameter C.I. pipe |
| 269 | xi. 600 mm diameter C.I. pipe |
| 270 | xii. 700 mm diameter C.I. pipe |
| 271 | 750 mm diameter C.I. pipe |
| 272 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 273 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 274 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 275 | Providing laying & fixing of D.I specials for push on jointing as per IS : 9523i. Upto 600 mm dia |
| 276 | ii. Above 600 mm dia |
| 277 | Providing & laying D.I specials of class K-12 suitable for mechanical jointing as per IS : 95523i. Upto 600 mm dia |
| 278 | ii. Above 600 mm dia |
| 279 | Pumping out water caused by springs, tidal or river seepage broken water. |
| 280 | Providing, installation, testing and commissioning of Air valve including dismatling of damages Air Valve & returning of same to Divisional Store. This also includes welding / pipe specials needed to successfully commissioning of Air valve.a. 100mm dia |
| 281 | a. 80mm ida |
| 282 | b. 50mm dia |
| 283 | 25mm dia |
| 284 | Replacement of old damaged CI / DI Sluice Valve, P.N 16, by providing / fixing of new Sluice Valve of reputed make as per approval of Engineer Incharge e including cost of nuts, bolts, rubber insulation all carriage and taxes upto site of work, complete (Subject to actual quantities during execution).a. 100mm dia. |
| 285 | a. 150mm dia. |
| 286 | b. 200mm dia. |
| 287 | c. 300mm dia. |
| 288 | d. 350mm dia. |
| 289 | e. 400mm dia. |
| 290 | 600mm dia. |
| 291 | Providing of Gun Metal Gate Valve of approved quality (Subject to actual quantities during execution).Screwed Enda. 100mm dia. |
| 292 | a. 80mm dia. |
| 293 | b. 65mm dia. |
| 294 | c. 50mm dia. |
| 295 | d. 40mm dia. |
| 296 | e. 25mm dia. |
| 297 | 20mm dia. Please Enable Macros to View BoQ information |
