|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge.I. In all kinds of soils |
| 2 | II. Ordinary rock |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:I. In all kinds of soils |
| 4 | II. Ordinary rock |
| 5 | III. Hard Rock (Requiring Blasting ) |
| 6 | IV. Hard Rock (Blasting Prohibite |
| 7 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.I. In all kinds of soils |
| 8 | II. Ordinary rock |
| 9 | III. Hard Rock (Requiring Blasting ) |
| 10 | IV. Hard Rock (Blasting Prohibited) |
| 11 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): i. Second class kail wood |
| 14 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. Complete.I. First class Budloo/Fir wood. |
| 15 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.I. With 2nd class teak wood beading 62x19 mm |
| 16 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.I. 100 mm and 150 mm dia GI pipes |
| 17 | II. 65 mm and 80 mm dia GI pipes |
| 18 | III. 40 mm and 50 mm dia GI pipes |
| 19 | IV. 25 mm and 32 mm dia GI pipes |
| 20 | V. 15 mm and 20 mm dia GI pipes |
| 21 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 22 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge :I. Above 40 mm nominal bore |
| 23 | II. 15 - 40 mm nominal bore |
| 24 | Providing / fixing of M.S double collers/ arresting of leakages by way of welding including all sorts of carriages.I. 80 mm dia |
| 25 | II. 100 mm dia |
| 26 | III. 150 mm dia |
| 27 | IV. 200 mm dia |
| 28 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. I. Lighting points |
| 29 | II. Heating points |
| 30 | Supply/ fixing of pipe specials from open market, if not available in the Divisional stores of ISI marked standard make.I. 20 mm dia G.I. Union |
| 31 | II. 80 mm dia G.I. Elbow |
| 32 | III. 50 mm dia G.I. Elbow |
| 33 | IV. 40 mm dia G.I. Elbow |
| 34 | V. 25 mm dia G.I. Elbow |
| 35 | VI. 20 mm dia G.I. Elbow |
| 36 | VII. 25 mm dia G.I. Socket |
| 37 | VIII. 20 mm dia G.I. Socket |
| 38 | IX. 25x25x20 mm dia G.I. Equal Tee |
| 39 | X. 40x40x25 mm dia G.I. Equal Tee |
| 40 | XI. Supply of Kerosene |
| 41 | Providing refreshment to supervisory staff for restoration of water during day/night or participants of the Independence Day, Republic Day or other Official functions complete job including packing at venue with following menu including serving charges /carry bags.i. Water Bottle One litre |
| 42 | ii. Water Bottle 500 ml |
| 43 | iii. Water Bottle 250 ml |
| 44 | iv. Juice pac/ tin 100 ml t0 180ml of Standard Quality |
| 45 | v. Boiled Egg/Omelete |
| 46 | vi. Biscuit standard Quality of 50g |
| 47 | vii. Dal 50g Pac |
| 48 | viii Banana |
| 49 | ix Butter Toastes each pair |
| 50 | x. Toastes without butter each pair |
| 51 | xi. Tea Sugar each cup |
| 52 | xii. Tea Namkeen each cup |
| 53 | xiii. Normal chicken biryani one plate for person. |
| 54 | xiv. Rice plate with Dal, vegetables & curd for each person. |
| 55 | xv. Rice Plate with vegetables, Single piece meat and curd for each person. |
| 56 | xvi.Reffilling of Gas |
| 57 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 58 | Replacement / supply of PVC gate valves for bleaching / alum tanks/ Foot valves and PVC pipes of ISI marked standard make.I. 20 mm dia Gate valve . |
| 59 | II. 25 mm dia Gate valve |
| 60 | III. 32 mm dia Gate valve |
| 61 | IV. 40 mm dia Gate valve |
| 62 | V. 50 mm dia Gate valve |
| 63 | Providing / fixing of new Gate valves/ DI Sluice valve including cost of nuts, bolts, rubber insulations etc. of ISI marked standard make all carriages upto site of works, complete . and providing of check certificate from the standard manufacturer.I. 40 mm dia Gate valve |
| 64 | II. 25 mm dia Gate valve |
| 65 | III. 20 mm dia Gate valve |
| 66 | Supply of Blower (Heater) |
| 67 | Supply of Steel locker (Medium Size) of Standard make. |
| 68 | Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport I. Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms |
| 69 | II. Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms |
| 70 | III. Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms |
| 71 | IV. Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms |
| 72 | V. Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms |
| 73 | VI. Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 74 | VII. Sand & Agg. 20 mm avg. lead of upto 01 Kms |
| 75 | VIII. Sand & Agg. 20 mm avg. lead upto 02 Kms |
| 76 | IX. Sand & Agg. 20 mm avg. lead upto 03 Kms |
| 77 | X. Sand & Agg. 20 mm avg. lead upto 04 Kms |
| 78 | XI. Sand & Agg. 20 mm avg. lead upto 05 Kms |
| 79 | XII. Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 80 | XIII. Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 81 | XIV. Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km |
| 82 | XV. 40 mm Agg. avg. lead of upto 01 Km |
| 83 | XVI. 40 mm Agg. avg. lead upto 2 Kms |
| 84 | VII. 40 mm Agg. avg. lead upto 3 Kms |
| 85 | XVIII. 40 mm Agg. avg. lead upto 4 Kms |
| 86 | XIX. 40 mm Agg. avg. lead upto 5 Kms |
| 87 | XX. 40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 88 | XXI. 40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 89 | XXII. 40mm Agg. avg. lead beyond 20 Kms per additional Km |
| 90 | Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour I. Cement for an avg. lead upto 50 mtr. |
| 91 | II.Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 92 | III. Steel for an avg. lead upto 50 Mtr |
| 93 | IV. Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 94 | V.Pipe for an avg. lead upto 50 Mtr |
| 95 | VI. Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 96 | VII. Soiling for an avg. lead upto 50 Mtr |
| 97 | VIII.Soiling for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 98 | IX. Sand & Agg.20mm for an avg. lead upto 50 Mtr |
| 99 | X. Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 100 | XI. 40mm Agg. for an avg. lead upto 50 Mtr |
| 101 | XII. 40mm Agg. for an every additional lead of 50mtrs or part thereof beyond 1st 50 mtrs |
| 102 | Centring and shuttering including strutting, propping etc, and removal of form for.I. Foundations, footings, bases of columns etc for mass concrete. |
| 103 | II. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 104 | III. Columns, pillars, piers, abutments, posts and struts. |
| 105 | IV. Suspended floors, roofs, landings, balconies and access platforms. |
| 106 | V. Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 107 | Supply of fire wood / rejection wood incld. all carriages upto site of work, complete |
| 108 | Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 109 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 110 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 111 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 112 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.I. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 113 | II. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 114 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 115 | Providing and fixing of printed PVC type flex banners as per requirement complete job.I. Without the supporting frame of steel rolled hollow Sq. bars . |
| 116 | II. With the supporting frame of steel rolled hollow Sq. bars |
| 117 | III. With the supporting frame of steel rolled hollow Sq. bars and cardboard backing |
| 118 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of :I. G.S Sheet. |
| 119 | II. Supply of unskilled labours |
| 120 | III. Supply of skilled labour |
| 121 | IV. Supply of Carpenter 2nd class |
| 122 | V. Supply of Mason 2nd class |
| 123 | VI. Supply of Welder |
| 124 | Supply of LED lights of different Wattage of approved m ake ISI marked complete in all respects.I. 15 W |
| 125 | II. 11 W |
| 126 | III. 9 W |
| 127 | IV. 7 W |
| 128 | Engagement of JCB including haltage charges |
| 129 | Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job. |
| 130 | Providing coloured Photographs as per requirement/ works executed at various places on photo paper of size 4\\"X6\\" |
| 131 | Supply and installation of heavy furnished office cabins of different sizes including all side painting, doors and windows, necessary fittings and fixtures etc. complete in all respect. |
| 132 | Documentation of various official documents/DPRs including.I. Supply of A4 size paper rim (500 sheets) |
| 133 | II. Drafting on paper A4 size |
| 134 | III. Coloured printing A4 size |
| 135 | IV. Black and white Printing A4 size |
| 136 | V. Photostate A4 size |
| 137 | VI. Spiral Binding |
| 138 | VII. Thermal Binding |
| 139 | VIII. Calculator |
| 140 | IX. Pen |
| 141 | X. Supply of Premium lever lock filles of standard make |
| 142 | XI. Supply of Anti virus for Computer |
| 143 | XII. Supply of Cartridge for Computer |
| 144 | Making of Wooden almera, cabin, boxing including shelves using 19mm thick ply to ply , mica 1mm, adhesive, hinges, locking system, handles (hydraulic/manual), skilled/unskilled labr complete in all respects as per directions of site engineer. |
| 145 | Providing of plastic buckets, Mug, Brooms, Wippers etc of good quality at various plants complete |
| 146 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto/above plinth level.I. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 147 | Supply installation and Commissioning incl trail run for 6 months of standard quality Air Cooler(Both Hot and Cold) incl. all carriages,fittings and necessary items etc complete job. 1 Ton |
| 148 | supply of furnishing/furniture items of good quality/shape/colour/hygiene (as per the directions of Engineer In-charge) of required size with all leads, lifts and carriage including fixing of the same in arranged manner as will be directed at site all complete .I. P.V.C Chairs (heavy duty) |
| 149 | Supply and fixing of Banners of required sizes with required letter writing as directed size (3’x6’) complete. |
| 150 | Providing, fixing including testing and commissioning of Electrical materials with all sorts of carriage and labour charges required for the job. (as per directions of Engineer Incharge).i. Suitable feeder panel with cable alley |
| 151 | ii. 150A 4P MCCb 36(KA Incomer) |
| 152 | iii. Red Gen Next pro LED Indicator 22.5mm Voltage 240V AC |
| 153 | iv. Blue Gen Next pro LED Indicator 22.5mm Voltage 240V AC |
| 154 | v. Yellow Gen Next pro LED Indicator 22.5mm Voltage 240V AC |
| 155 | vi. 6A 1P 10KVA C-Cure MCB Type SB-201 MC |
| 156 | vii. Aluminium Bus bar for outgoing (Current density 0.8A/Sqmm) |
| 157 | viii. Bar Type terminal blocks with locking nut for incomer. |
| 158 | ix. End plate for incommer |
| 159 | x. 16SQMM TB for Outgoing |
| 160 | xi. End Plate for outgoing. |
| 161 | Hire charges of commercial vehicle including POL along with commercial licensed.i. Upto 60Km per day |
| 162 | ii. Beyond 60Km upto 120Km per day Please Enable Macros to View BoQ information |
