Tender For Annual Operation And Maintenance Of 20Mgd Water Treatment Plant Rangil Stage Contract 2026-2027 (Under M&R)., Srinagar-Jammu And Kashmir

TDR : 55004994

Tender Notice
BOQ

11 Days Left

Srinagar , Jammu And Kashmir

Tender Brief : Tender For Annual Operation And Maintenance Of 20Mgd Water Treatment Plant Rangil Stage Contract 2026-2027 (Under M&R).

Document Fees
₹ 500 /-

EMD
₹ 18000.0 /-

Tender Value
₹ 9 Lakhs /-

Submission Date
20-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: I. All kinds of soil
2	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edgeI. All kinds of soil
3	Extra for additional lift of 1.5 mtr or part thereof in excavation/banking excavated or stacked material.i. In all kinds of soils.
4	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (Subject to actual quantities during execution).
5	Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
6	Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):i. Depth not exceeding 1.5 m.
7	ii. Depth exceeding 1.5 m but not exceeding 3 m
8	iii. Depth exceeding 3 m but not exceeding 4.50 m
9	Supply and filling of 2nd class sand / stone dust around pipes at different spots including cost of material i.e. stone dust from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing and watering including compaction after each 15cms thickness in all respects. Complete Job. (Subject to actual quantities during execution).
10	Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job.
11	Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same in- All kinds of soil.
12	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
13	Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared
14	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.i. Beyond 30cm girth upto and 60cm girth
15	i. Beyond 60cm girth upto and 120cm girth
16	ii. Beyond 120cm girth upto and 240cm girth
17	Above 240cm girth
18	Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (Subject to actual quantities during execution).
19	Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.
20	Disposal of surplus excavated material by mechanical transport including loading, unloading & stacking. (Deductions on account of use of departmental men and machinary shall be as per actual).i. For an avg lead of 1km.
21	i. For an avg lead of 2km.
22	For an avg lead of 3km.
23	Demolishing cement concrete manually by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: i. 1:3:6 or richer mix (i/c equivalent design mix)
24	ii. 1:4:8 or leaner mix (i/c equivalent design mix)
25	Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
26	Extra for cutting reinforcement bars manually/by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross-sectional areas of R.C.C. or R.B. work) as per direction of Engineer-in-charge.
27	Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
28	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar.i. In mud mortar
29	ii. In Cement mortar.
30	Removing mortar from bricks and cleanin bricks including stacking within a lead of 50 m.(stacks of cleaned bricks shall be measured)i. From brick work in mud mortar
31	ii. From brick work in cement mortar
32	Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar.
33	Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured)i. In cement mortar
34	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
35	Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in : i. R.S. Joists.
36	ii. Channels, angles, tees and flats.
37	Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.
38	Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge:
39	Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one meter or part thereof beyond 10 meters
40	Extras for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one meter or part thereof beyond 5 meters.
41	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. i. For thickness of tiles 10 mm to 25 mm l
42	ii. For thickness of tiles above 25 mm and upto 40 mm.
43	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : i. Of area of 3 sqm. and below
44	ii. Of area beyond 3 sqm
45	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : i. Of area of 3 sqm. and below
46	ii. Of area beyond 3 sqm.
47	Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : i. Of sectional area 40 sqcm. and above.
48	ii. Of sectional area below 40 sqcm.
49	Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one meter or part thereof beyond 10 meters : i. Of sectional area 40 sqcm and above.
50	ii. Of sectional area below 40 sqcm.
51	Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one meter or part thereof beyond 5 meters : i. Of sectional area 40 sqcm. and above.
52	ii. Of sectional area below 40 sqcm.
53	Providing and laying of dry-stone soling in foundation/trenches hand packed and consolidated by hand ramming. (Subject to actual quantities during execution).
54	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size).
55	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size.)
56	Providing and laying in position reinforced cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size crushed stone agg) excld. the cost of centring, shuttering and reinforced steel.) upto plinth level for saddle/anchor/thrust blocks. (Subject to actual quantities during execution).
57	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
58	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
59	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
60	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
61	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
62	Centering and shuttering including strutting, propping etc. and removal of form for:(Deductions on account of use of departmental men and machinery shall be as per actual)i. Foundations, footings, bases of columns etc. for mass concrete.
63	ii. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
64	iii. Suspended floors, roofs, landings, balconies and access platforms.
65	iv. Lintel, beams, plinth beams, girders, bressumers and cantilevers.
66	v. Columns, pillars, piers, abutments, posts and struts.
67	vi. Stairs (excluding landings) except spiral staircases.
68	Reinforcement for R.C.C. work including straightening cutting, bending, placing in position and binding all complete (TMT BARS) for saddle/anchor/thrust blocks. (Subject to actual quantities during execution).
69	Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: a. Cement mortar 1:6 (1 Cement : 6 coarse sand)
70	excluding cost of stoness
71	Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone. Nallalh
72	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4 Cement mortar ( 1 cement : 4 coarse sand).
73	12mm cement plaster finished with a floating coat of neat cement of mix : 1 : 3 (1 cement : 3 fine sand).
74	Providing, fixing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 8mm to 10mm thick MS. plate as per the requirement of site. This item includes cost of lead, spun yarn, R.I. cloth and lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof and should be painted with Anticorrosive Red Oxide Primer and incld. all carriages, leads lifts, etc. complete. (Subject to actual quantities during execution). i. i. Mild steel
75	Welding of pipe / pipe fittings by way of engaging generator, welding set including all types of carriage involved. (Complete Job) (Subject to actual quantities during execution).
76	Structural steel work in welded built up sections for angles, channels, girders, gusset plates etc, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (welded or bolted). This item includes all carriages, charges of welder, equipments and machinery up to site for completion of job. (Subject to actual quantities during execution).
77	Dismantling of dislocated joints, repairs by way of welding of joints, flanged bends including cost of hire charge of DG set on vehicle including cost of equipment etc. complete.
78	Renewing glass panes, with putty and nails wherever necessary including raking out old putty : a. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
79	b. Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm)
80	Renewing glass panes, with wooden fillets wherever necessary : a. Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
81	b. Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm)
82	Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm.
83	Desilting of various structures (Clarifloculators, Backwash tanks, Raw/ Settled water channels, zero effluent, service reservoirs etc.the job includes hire charges of dewatering motors as per site requirement , breaking of the deposited reservoir sediment by water pressure or by manual means and then guiding and pushing the loose and wet silt towards the outlet of the wash out for final disposal and including disposal of residual desilting material from the beds as well as from site premises with all carriages lead and lifts etc. The job also includes washing and cleaning of walls, beds drains and floor etc. with bleaching powder solution as well complete job.
84	Clearing snow (with frost) from Roads, manually using picks and shovels; snow depth upto 150 mm.
85	Clearing Snow (without frost) from Roads, manually;i. Snow depth 150mm
86	i. Snow depth over 150mm but 250mm
87	ii. Snow depth 250mm but 350mm
88	Snow depth 350mm but 450mm
89	Fixing of chain link fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. This item also includes carriage of chain link fencing from Divisional Store upto site of work.
90	Fixing charges of MS lids of different size for Sluice Chambers etc. including concreting, angle irons, locking arrangements, hinges etc. required for the completion of job. This item also includes carriage of lids from Divisional Store upto site of work.
91	Repairs to manually operated winch gates, trash guards by means of replacement of channels, M.S. Gates, Bearings including dismantling and refixing of the same as per the directions of engineer incharge.(Subject to actual quantities during execution).
92	Repairs/rethreading/replacement of sluice rod and providing of new check nut made of gun metal and replacement of worn-out parts by new ones if required at site incl. all complete. The entire assembly is to be re-fixed in its original position after carrying out necessary repairs. The job includes all carriages of materials, tools and plants and shall be paid in fitted and fixed form after testing on full water load and successful commissioning. Complete job. (Deductions on account of use of departmental men and machinery shall be as per actual).i. 900mm dia Butterfly Valve
93	i. 700mm dia Butterfly Valve
94	ii. 900mm dia Sluice Valve
95	iii. 600mm dia Sluice Valve
96	iv. 500 / 450mm dia Sluice Valve
97	v. 350 / 300mm dia Sluice Valve
98	200/150mm dia Sluice Valve
99	Overhauling of flanged type sluice valves by way of replacing of gland packing, non-magnetic nuts bolts and washers including R.I. cloth washers including oiling and greasing. The job includes dismantling of sluice valve reassembling after carrying out necessary repairs rod to be threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work from 100m dia Sluice valve upto 450mm dia Sluice valve (Complete job).
100	Dismantling of air blower / backwash motors and pumps / Alum motors / bleaching motors of filtration plants by way of rewinding of core made out of copper metal fiber superior type of required thickness and guage. The job also includes all sorts of carriage from site to work upto workshop to & fro including testing and commissioning of following capacity.i. For 0.50HP to 2.00HP
101	ii. For 3.00HP to 5.00H
102	Providing and fixing of running V-Belt of groove type for air blower, the job includes dismantling damaged ones and fixing of new ones including successful testing, commissioning. All types of carriage complete.
103	Dismantling of complete reduction gear unit of de-sludge bridge for repairs by way of providing & manufacturing of complete reduction gear with hub. The job includes casting of brass material, grinding & finishing of virme in order to make the new teeth, replacement of damaged oil seals by way of new one, replacement of ball bearings, pouring of required specific gravity gear oil I order to run the reduction gear in smooth order, refixing of same at the site of work including all sorts of carriage from site of work upto workshop and back to site of work including testing and successful commissioning (Complete Job).Repairs to the rotarory wheel of the clarifloculator bridge by way of raising the bridge on the hydraulic jacking arrangement, replacement of the worn out wheel bearing and nuts of the assembly, depositing of the cast iron metal if required on the cups/base of the wheel bearing of shaft rod/ axle road testing and commissioning after completion of work with all carriages and head load all complete
104	Dismantling of churner of de-sludge bridge for repairs by way of providing & fixing of angle iron frame work complete, including replacement of damaged oil seals by way of new one, replacement of ball bearings, pouring of required specific gravity gear oil I order to run the reduction gear in smooth order, refixing of same at the site of work including all sorts of carriage from site of work up to workshop and back to site of work including testing and successful commissioning (Complete Job).
105	Providing and fixing of dry 90HP star delta starter, 100 HAVELLS, L&T MAKE fully automatic or equivalent, the job includes dismantling of damaged / non-functional starter and fixing of new one including all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant up to Divisional Sores including testing, installing and commissioning complete job.
106	Providing and fixing of dry 50HP fully automatic star delta starter 100A of HAVELLS OR L&T approved Make, the job includes dismantling of damaged / non-functional starter and fixing of new one including all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant up to Divisional Sores including testing, installing, and commissioning complete job.
107	Providing and fixing of dry 40HP fully automatic start delta starter 100A Starter of HAVELLS OR L&T approved Make, the job includes dismantling of damaged / nonfunctional starter and fixing of new one including all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant up to Divisional Sores including testing, installing, and commissioning complete job.
108	Providing and fixing of dry 30HP fully automatic start delta starter 100A Starter of HAVELLS OR L&T approved Make, the job includes dismantling of damaged / nonfunctional starter and fixing of new one including all sorts of carriages from source to workshop including carriages of salvaged materials from filtration plant up to Divisional Sores including testing, installing, and commissioning complete job.
109	Providing and fixing of dry 5.0 HP starter of approved Make, the job includes dismantling of damaged/ non-functional starter and fixing of new on including all sorts of carriages of salvaged materials from filtration plant upto Divisional Stores including testing, installing and commissioning completer job.
110	Overhauling voltage stabilizers installed at site. The job includes pouring/filling of transformer oil of required specified gravity, replacement of driven Rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work up t the workshop & back to actual site of work include. installation at site & testing, successful commissioning complete job.i. 5KV to 10KV
111	i. 10KV to 20KV
112	ii. 20KV to 50KV
113	iii. 30KV to 100KV
114	iv. 60KV to 230KV
115	100KV to 300KV
116	Providing and fixing of MCCB Havells make the job includes dismantling of damaged / non-functional Amp. MCCB and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installation and commissioning complete job.i. 3 Pole 400Amp-500 Amp thermal release
117	i. 4 Pole 400Amp-500 Amp thermal release
118	ii. 3 Pole 200Amp
119	iii. 4 Pole 200Amp
120	iv. 3 Pole 100Amp
121	v. 4 Pole 100Amp
122	vi. 3 Pole 63Amp
123	vii. 4 Pole 63Amp
124	2 Pole 32Amp
125	HAVELLS Brand power cables, solid Aluminum conductor up to 10 sq mm and balance stranded conductor, XLPE insulated, Cores Laid up, PVC inner sheathed, Unarmored/Armored (Aluminum wire for single core up to 70 Sq. mm and balance Aluminum strip, Galvanized wire for cables up to 2Cx10 sq. mm, 3Cx10 sq. mm, 4Cx6 sq. mm and balance all galvanized steel stip) Extruded PVC type ST2 Outer Sheathed, 650 V/ 1100 V Grade as per IS 7098(Part1) 1988 with up-to-date Amendments.ARMOURED CABLE 3.5 CORE 95 sq mm
126	120 sq mm
127	150 sq mm
128	185 sq mm
129	240 sq mm
130	UNARMOURED SINGLE CORE 16 sq mm
131	25 sq mm
132	35 sq mm
133	50 sq mm
134	Heat resistant flame retardant HRFR PVC insulated industrial cables Havells Single Core HRFR PVC insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volt Conforming to IS 694 1.00 sq mm
135	1.5 sq mm
136	2.00 sq mm
137	2.5 sq mm
138	4.00 sq mm
139	10.00 sq mm
140	16.00 sq mm
141	Havells PVC insulated and PVC Round Sheathed, Multicore Annealed Vare Copper Conductor (flexible) industrial cable for voltage Grade 1100 Volt, Conforming to IS694: 2010 THREE CORES 6.00 sq mm
142	10.00 sq mm
143	16.00 sq mm
144	25.00 sq mm
145	Manufacturing, providing, fixing, installation of any number of retro- reflective signage system/ boards as directed by engineer-in-charge of 2 mm thick aluminium alloy highly stressed sheeting plates of different size and specifications having properties of anti- corrosion, weather resistant, colour stability, extreme durability and extreme visibility in all weather conditions in accordance with the international brand complete with computer aided machine process subject matters, logos symbols, borders arrow text size in English/Urdu as directed by engineer-in-charge and graphics by way of cut outs, printing application in green and white colours which includes providing of fancy type metal stanchion upto 300 cm length of 40 mm OD with 90 mm decorative dome shaped top including supporting stiffeners for strengthening of the job wherever necessary with providing of 15 cm long resting toe plates fitted at bottom for embedding which also includes suitable technical provisions by way of accurate pre-drilled holes to enable anti- theft-riveting system and other necessary allied hardware required for the job and priming / cladding, painting of ISC which also includes installation, erection, hoisting and fixing in position including embedding of signage/ metal stanchion at various locations or site including packing/ carriages, handling/ re-handling/, loading/ unloading, leads/ lifts and head load necessary with tools/ plants and all consumable electric energy gases etc. as and when required for scaffolding as per requirement of site (retro-reflective signages of super-engineering grade with fancy type metal stanchion in structural steel frame and all installation charges, complete in all respects.
146	Providing and fixing of electrical points (heating and lighting) including cost of wire (1.5mm for lighting and 4mm for heating) switches, necessary MCB’s switch boards, ceiling roses of reputed make ISI mark screws, casing / conduit material of all sorts of carriage and labour charges required for the job.i. Lighting Points
147	ii. Heating Points
148	Supply of 20W LED Bulbs ISI make as approved by Engineer Incharge for filtration plant sites etc.
149	Supply of 9W LED Bulbs ISI make as approved by Engineer Incharge for filtration plant sites etc.
150	Supply of 50W LED flash lights for filtration plant sites etc.
151	Repairs to fridge/ defreezer by way of replacement of panel board etc.
152	Periodic servicing / overhauling of 125KVA DG Set
153	Charging of inverter battery
154	Supply of distilled water for batteries.
155	Repair of lawn mower by way of replacement of bearings / belt.
156	Gas refilling hydrocarbon flame gas (R-410) or as per make/ like of AC
157	Repairs to foot valves 150mm dia including dismantling and refitting after repairs.
158	Supply of various T&P Articlesi. Slippers (Aqualite)
159	i. Hower wiper (Action ware)
160	ii. Dust bin 15Ltr. capacity
161	iii. Dust bin 5Ltr. capacity
162	iv. Brooms long type
163	v. Brooms short type
164	vi. Long boots (water proof)
165	vii. Rubber pipe 20mm dia (25.00 mtrs)
166	viii. Towel (large size)
167	ix. Towel (meduim size)
168	x. Harpic
169	xi. Colin
170	xii. Soap 50gm.
171	xiii. Gas regulator
172	xiv. Gas Pipe
173	xv. Waste Pipe for sinks / wash basins.
174	xvi. Bush rods
175	xvii. Mug
176	xviii. Bucket 15Ltr. Capacity
177	xix. Bucket 5Ltr. Capacity
178	xx. Garden Shear
179	xxi. Mirror (looking glass) size 2’-0” x 1’-6”
180	xxii. Showel
181	xxiii. Pick axe
182	xxiv. Fish net
183	Broom
184	Engagement of JCB cost of POL, Driver.
185	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
186	White washing with lime to give an even shade.i. Old work (two or more coats).
187	ii. Old work (one or more coats).
188	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
189	Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.
190	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.
191	Applying priming coat: i. With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
192	ii. With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood.
193	iii. With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works.
194	iv. 4 With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat).
195	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
196	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. i. One coat
197	Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
198	Finishing walls with premium Acrylic smooth exterior paint with silicon additives of required shade: i. Old work (Two or more coats applied @ 1.43 liters/ 10 sqm) over existing cement paint surface.
199	ii. Old work (one or more coats applied @ 0.83 liters/ 10sqm)
200	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete i. On steel work
201	ii. On concrete work
202	Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
203	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
204	Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats).
205	Painting with Aluminium paint of approved brand and manufacture to give an even shade, one or more coats on old work.
206	Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade, one or more coats on old work.
207	French spirit polishing, one or more coats on old work.
208	Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture.
209	Melamine polishing on wood work (one or more coats).
210	Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade on new work Two or more coats.
211	Lettering with black Japan paint of approved brand and manufacture.
212	Providing and applying white cement-based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. i. 2 mm thick
213	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
214	Providing, fixing of M.S flanges by welding including cost of cutting making both holes made out of 10/14mm thick M.S plate to the pipes of different dia’s and including cost of nuts, bolts, washers etc. (Complete Job).i. 80mm dia
215	i. 100mm dia
216	ii. 150mm dia
217	iii. 200mm dia
218	iv. 250mm dia
219	v. 300mm dia
220	vi. 400mm dia
221	vii. 450mm dia
222	viii. 500mm dia
223	ix. 600mm dia
224	x. 700mm dia
225	xi. 750mm dia
226	xii. 800mm dia
227	xiv. 900mm dia
228	Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead. (Subject to actual quantities during execution).i. 100 mm dia. pipe
229	i. 125 mm dia. pipe
230	ii. 150 mm dia. pipe
231	iii. 200 mm dia. pipe
232	iv. 250 mm dia. pipe
233	v. 300 mm dia. pipe
234	vi. 350 mm dia. pipe
235	vii. 400 mm dia. Pipe
236	viii. 450 mm dia. pipe
237	ix. 500 mm dia. pipe
238	x. 600 mm dia. Pipe
239	700 mm dia. Pipe
240	i. 750 mm dia. Pipe
241	ii. 800 mm dia. Pipe
242	900 mm dia. Pipe
243	Supply of fitter / labours. i. Fitter
244	i. Asstt. Fitter
245	ii. Labour
246	iii. Carpenter 2nd class
247	iv. Aluminium fitter
248	Painter
249	Supply of lead, spun Yarn, Fire Wood Kerosene including all carriages upto site of work.i. Lead
250	i. Spun Yarn
251	ii. Fire Wood
252	iii. Kerosene
253	RI Cloth
254	Providing and fixing brass bib cock of approved quality. i. 15 mm nominal bore
255	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) i. 25 mm nominal bore
256	i. 20 mm nominal bore
257	ii. 32 mm nominal bore
258	iii. 40 mm nominal bore
259	iv. 50 mm nominal bore
260	v. 65 mm nominal bore
261	80 mm nominal bore
262	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.i. 15 mm nominal bore
263	i. 20 mm nominal bore
264	25 mm nominal bore
265	Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe).
266	Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc. (excluding cost of specials).
267	Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc ., suitable for flanged jointing as per IS : 1538 i. Up to 300 mm dia.
268	ii. Over 300 mm dia
269	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. i. 100 mm dia pipes
270	i. 150 mm dia pipes
271	ii. 200 mm dia pipes
272	iii. 250 mm dia pipes
273	iv. 300 mm dia pipes
274	v. 350 mm dia pipes
275	vi. 400 mm dia pipes
276	vii. 450 mm dia pipes
277	viii. 500 mm dia pipes
278	ix. 600 mm dia pipes
279	x. 650 mm dia pipes
280	xi. 700 mm dia pipes
281	xii. 800 mm dia pipes
282	xiii. 900 mm dia pipes
283	1000 mm dia pipes
284	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge : i. 15 mm to 40 mm nominal bore. .
285	ii. Above 40 mm nominal bore
286	Re-threading of damaged pipe ends including carriage from site to workshop and back.i. 20mm dia
287	i. 25mm dia
288	ii. 40mm dia
289	50mm dia
290	Supply of pipe specials from open market, if not available in the Divisional stores (available supplies if any has to be lifted from the Divisional Stores). of reputed make.i. 25mm dia GI Union
291	i. 20mm dia GI Union
292	ii. 25mm dia GI Elbow
293	iii. 20mm dia GI Elbow
294	iv. 25mm dia GI Socket
295	v. 20mm dia GI Socket
296	vi. 25mm dia GI Nipple 250mm long
297	20mm dia GI Nipple 250mm long
298	Replacement / supply of PPR gate valves for bleaching / alum tank / foot valves and Prince pipes.i. 20mm dia Gate Valve.
299	i. 25mm dia Gate Valve
300	ii. 32mm dia Gate Valve
301	iii. 40mm dia Gate Valve
302	iv. 50mm dia Gate Valve
303	v. 20mm dia PVC Pipe (B Class)
304	vi. 25mm dia PVC Pipe (B Class)
305	vii. 32mm dia PVC Pipe (B Class)
306	viii. 40mm dia PVC Pipe (B Class)
307	ix. 50mm dia PVC Pipe (B Class)
308	Providing and fixing 3-layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold-water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. i. Internal work-exposed on wall with clamps at 1.00 meter spacing a. PN-16 pipe, 16mm OD (SDR-7.4)
309	a. PN-16 pipe , 20mm OD(SDR-7.4)
310	b. PN-16 pipe , 25mm OD(SDR-7.4)
311	c. PN-16 pipe , 32mm OD(SDR-7.4)
312	d. PN-16 pipe , 40mm OD(SDR-7.4)
313	e. PN-10 pipe , 50mm OD(SDR-11)
314	ii. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. a. PN-16 pipe, 16mm OD(SDR-7.4)
315	a. PN-16 pipe , 20mm OD(SDR-7.4)
316	b. PN-16 pipe , 25mm OD(SDR-7.4)
317	c. PN-16 pipe , 32mm OD(SDR-7.4)
318	iii. External work including trenching, refilling etc. a. PN-16 pipe, 16mm OD (SDR-7.4)
319	a. PN-16 pipe , 20mm OD (SDR-7.4)
320	b. PN-16 pipe , 25mm OD (SDR-7.4)
321	c. PN-16 pipe , 32mm OD (SDR-7.4)
322	d. PN-16 pipe, 40mm OD (SDR-7.4)
323	e. PN-10 pipe , 50mm OD (SDR-11)
324	f. PN-10 pipe , 63mm OD (SDR-11)
325	g. PN-10 pipe , 75mm OD (SDR-11)
326	h. PN-10 pipe , 90mm OD (SDR-11)
327	i. PN-10 pipe , 110mm OD (SDR-11)
328	PN-10 pipe , 160mm OD (SDR-11)
329	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. i. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing a. 15mm nominal outer dia pipes.
330	a. 20mm nominal outer dia pipes.
331	b. 25mm nominal outer dia pipes.
332	c. 32mm nominal outer dia pipes.
333	Sluice Valve
334	e. 50mm nominal outer dia pipes.
335	ii. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. a. 15mm nominal outer dia pipes.
336	a. 20mm nominal outer dia pipes.
337	b. 25mm nominal outer dia pipes.
338	c. 32mm nominal outer dia pipes.
339	iii. External work including trenching, refilling etc. a. 15mm nominal outer dia pipes.
340	a. 20mm nominal outer dia pipes.
341	b. 25mm nominal outer dia pipes.
342	c. 32mm nominal outer dia pipes.
343	d. 40mm nominal outer dia pipes.
344	e. 50mm nominal outer dia pipes.
345	f. 62.50mm nominal outer dia pipes.
346	g. 75mm nominal outer dia pipes.
347	h. 100mm nominal outer dia pipes.
348	150mm nominal outer dia pipes.
349	Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (light class)i. 15 mm dia. nominal bore
350	i. 20 mm dia. nominal bore
351	ii. 25 mm dia. nominal bore
352	iii. 40 mm dia. nominal bore
353	iv. 50 mm dia. nominal bore
354	65 mm dia. nominal bore
355	Replacement of old damaged G.I. / C.I. Gate Valves / Sluice Valves by providing / fixing of new Gate Valves / Sluice Valves including cost of nuts, bolts, Rubber insulations all carriages upto site of works complete.i. 100mm dia Gate Valve
356	i. 80mm dia Gate Valve
357	ii. 65mm dia Gate Valve
358	iii. 50mm dia Gate Valve
359	40mm dia Gate Valve
360	Fixing charges of Sluice Valve including testing, commissioning of sluice joint and carriages from Divisional Store to actual site of work, Complete job.i. 900mm dia Butterfly Valve
361	i. 700mm dia Butterfly Valve
362	ii. 900mm dia Sluice Valve
363	iii. 750mm dia Sluice Valve
364	iv. 700mm dia Sluice Valve
365	v. 500mm dia Sluice Valve
366	vi. 450mm dia Sluice Valve
367	vii. 400mm dia Sluice Valve
368	viii. 350mm dia Sluice Valve
369	ix. 300mm dia Sluice Valve
370	x. 200mm dia Sluice Valve
371	xi. 150mm dia Sluice Valve
372	xii. 125mm dia Sluice Valve
373	xiii. 100mm dia Sluice Valve
374	xiv. 80mm dia Sluice Valve
375	50mm dia Sluice Valve
376	Supply of empty cement bags including all carriages and head load upto actual site
377	Filling empty cement bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and earth / sand.
378	Loading/Unloading sand/ earth filled bags in lorries; lead upto 50m.
379	Supplying and stacking at site. Good Earth
380	Hand-packing stones in wire-crates; excluding cost of crates and stones
381	Extra for every additional lift of 1.5 m or part there of beyond 1.5 m height for hand-packing of stones in wire-crates.
382	Dumping stone excluding cost of stones. i. in Horizontal on level.
383	Making knitted wire crates of approved mesh-size; including weaving, binding sides and partitions, and binding top after filling; excluding cost of filling, stones and weaving materials.
384	Tipping stone-filled wire crates in position; including equipment charges.
385	Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively )i. Dry
386	ii. Wet
387	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) i. For fixed portion a. Anodized aluminium (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
388	b. Powder coated aluminium (minimum thickness of powder coated 50 microns)
389	c. Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns)
390	ii. For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) a. Anodized aluminium (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
391	b. Powder coated aluminium (minimum thickness of powder coated 50 microns)
392	c. Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns)
393	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineering-charge. (Cost of aluminium snap beading shall be paid in basic item.) i. With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm).
394	ii. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm).
395	iii. With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
396	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight up to 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineering- plate etc. complete as per the direction of Engineer-in-chargei. With Stainless Steel cover plate minimum 1.25 mm thickness.
397	ii. With brass cover plate minimum 1.25 mm thickness
398	Filling the gap in between aluminium frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. i. Upto 5mm depth and 5mm width
399	Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. i. For fixed portions
400	ii. Shutters of doors, windows, and ventilators
401	Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
402	Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge.i. Anodized (AC 15) aluminium
403	ii. Powder coated minimum thickness 50-micron aluminium
404	ii. Polyester powder coated minimum thickness 50 microns aluminium
405	Providing and fixing Anodized aluminium grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminium standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment).
406	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
407	Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hard wares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer -in- Charge.
408	Carriage of earth from source to dumping site of work including loading, unloading and stacking etc. complete by mechanical transport.a. Earth avg. lead upto 1Kms
409	a. Earth avg. lead upto 2Kms
410	b. Earth avg. lead upto 3Kms
411	c. Earth avg. lead upto 4Kms
412	d. Earth avg. lead upto 5Kms
413	f. Earth avg. lead upto 5Kms upto 10Kms (per Km)
414	g. Earth avg. lead upto 10Kms upto 20Kms (per Km)
415	h. Earth avg. lead upto 20Kms upto 10Kms (per additional Km)
416	Carriage of material from divisional store upto dumping site of work including loading, unloading and stacking etc. complete by mechanical transport.a. Cement & Steel, GI/CI Pipe avg. lead upto 1Kms.
417	b. Cement & Steel, GI/CI Pipe avg. lead upto 2Kms.
418	c. Cement & Steel, GI/CI Pipe avg. lead upto 3Kms.
419	d. Cement & Steel, GI/CI Pipe avg. lead upto 4Kms.
420	e. Cement & Steel, GI/CI Pipe avg. lead upto 5Kms.
421	f. Cement & Steel, GI/CI Pipe beyond 5Kms upto 10Kms (per Km).
422	g. Cement & Steel, GI/CI Pipe beyond 10Kms upto 20Kms (per Km)
423	h. Cement & Steel, GI/CI Pipe beyond 20Kms.
424	Carriage of material from different sources upto dumping site of work including loading, unloading and stacking etc. complete by mechanical transport.a. Sand and Agg., 20 mm av. lead upto 1Kms
425	a. Sand and Agg., 20 mm av. lead upto 2Kms
426	b. Sand and Agg., 20 mm av. lead upto 3Kms
427	c. Sand and Agg., 20 mm av. lead upto 4Kms
428	d. Sand and Agg., 20 mm av. lead upto 5Kms
429	f. Sand and Agg., 20 mm beyond 5Kms upto 10Kms. (Per Km).
430	g. Sand and Agg., 20 mm beyond 10Kms upto 20Kms. (Per Km).
431	a. Sand and Agg., 20 mm av. lead upto 20Kms
432	b. 40 mm Agg., lead upto 1Km.
433	c. 40 mm Agg., lead upto 2Km.
434	d. 40 mm Agg., lead upto 3Km.
435	e. 40 mm Agg., lead upto 4Km.
436	f. 40 mm Agg., lead upto 5Km.
437	n. 40 mm Agg., av. lead beyond 5Kms upto 10Kms (per Km).
438	o. 40 mm Agg., av. lead beyond 10Kms upto 20Kms (per Km).
439	p. 40 mm Agg., av. lead beyond 20Kms (per Km).
440	a. Stone soling av. lead upto 1Kms
441	b. Stone soling av. lead upto 2Kms
442	c. Stone soling av. lead upto 3 Kms
443	d. Stone soling av. lead upto 4Kms
444	e. Stone soling av. lead upto 5Kms
445	v. Stone soling av. lead beyond 5Kms upto 10Kms (per Km)
446	w. Stone soling av. lead beyond 10Kms upto 20Kms (per Km).
447	x. Stone soling av. lead beyond 20Kms (per Km)
448	Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour.a. Cement for an Avg. lead upto 50m
449	b. Cement for an every additional lead of 50m or part thereof beyond Ist 50m
450	c. Steel for an Avg. lead upto 50m
451	d. Steel for an every additional lead of 50m or part thereof beyond Ist 50m
452	e. Pipe for an Avg. lead upto 50m
453	f. Pipe for an every additional lead of 50m or part thereof beyond Ist 50m
454	g. Soling for an Avg. lead upto 50m
455	h. Soling for an every additional lead of 50m or part thereof beyond Ist 50m.
456	i. Sand and Agg. 20mm for an Avg. lead upto 50m
457	j. Sand and Agg. 20mm for an Avg. lead upto 50m or part thereof beyond Ist 50m.
458	k. 40mm Agg. for an avg. lead of 50m or part therefore of beyond Ist 50m.
459	l. 40mm Agg. for every additional lead of 50m or part therefore of beyond Ist 50m.
460	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). I. Kiln seasoned & chemically treated hollock wood
461	In or under water and/or liquid mud, icluding pumping out water as required.
462	In or under foul position including pumping out water as required.
463	Providing and fixing paneling or paneling and glazing in paneled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Float glass panes I. 4 mm thick glass pane (weighing not less than 10 kg/sqm)
464	5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)
465	Providing and fixing 30 mm thick factory made laminated veener lamber glazed shutter conforming to IS: 14616 and TADS 15: 2001 (Part B), using 4mm thick float glass panes for doors, windows and clerestory windows fixing with ISI marked butt hinges of required size with necessary screws as per directions of
466	Repairs to the gas heater the job includes repair of castor wheels, brass tubes, tap window, piezo electric effect and heat efficient ceramic tiles with all carriages and head load upto actual place of utilization.I. For replacing of the Aluminum tube Carter tube (3 no as set).
467	Tap window
468	Piezo electric effect lighter
469	Heat Efficient plates.
470	Providing and fixing of stainless-steel carter pin for sluice valve..
471	Periodic servicing and maintenance of ACS washing of body indoor /outdoor with chemical by motor (wet service ).
472	Power control board (PCB) INDOOR.
473	Power control board PCB OUTDOOR including providing and fixing of fresh mccb if required and replacing of the aluminim coil by copper coil as per site requirement
474	Repair of GYESER.I. Heating Element Aluminum made
475	I. Thermo stat Autocut
476	II. Indicator lights
477	III. Three pin plug 15 Ampere IS made
478	IV. Copper Wire 2.5 mm thick ,2.00 meters
479	V. Geyser bolts 4 no MS
480	VII. PVC CONNECTION LENGTH 450 MM ,15 mm
481	VIII. Angle Valve 15 mm of IS make
482	CONCEALED LED LIGHTS ISI MAKE I. 3-inch concealed light 5 TO 9 WATT
483	II. Providing and fixing of carpet EXCEL including all carriages and head load
484	III. Providing and fixing of Thermocol foam 10-12 mm thick
485	IV. RUBBER MATTING (1.80 METRE WIDE)
486	V. INSULATING MAT (0.900X1.80)
487	VI. 5 Ampere three pin socket
488	VII. 5 Ampere three pin socket modular
489	VIII. Extension cord 6 AMP- 16 Amp
490	Providing MS Skimmer comprising of fly proof wire guage mesh with average width of aperture 1.4 mm in both directions fitted with bamboo handlee 3.50 METRE LONG
491	Indoor Unit /Blower Unit of the 1.5 MT Air Conditioner (AC) gadget of Blue Star Quality having indoor Model no: -B1-5HNHW24PAFU I. Rated voltage :230vII. Rated frequency :50 H.III. Phase 1IV. Net Weight 17.70 kgsV. Refrigerant: R410AVI. Refri Charge Qty :2.30 KGS VII. Matching without door MODEL NO: BO-5HNHW24PAFU
492	PERIODIC SERVICING, MAINTENANCE AND REPLACING OF THE DAMAGED BEYOND COMPONENT OF 125 KV D G SET AS UNDER Supplying, replacement, testing and successful performance of self-starter 24 volts Lucas make for 125 KV diesel genset including fitting charges all complete with a trial run period of three months
493	Lubrication Oil Valvoline 15W40 Recommended by Mahindra
494	Coolant anti-freeze of Cummins Recommended by Mahindra 5.00 liters
495	Supplying and replacement of lubricating oil filters and fuel filters with new one to meet the requirement as per specification of the 125 KVA including labor charges all complete
496	General inspection including replacement charges of other miscellaneous parts like gasket, electric board wiring and MCCB of 125 KVA diesel genset
497	iSupplying and fixing of cable terminations to Aluminum Cable 630mm Core Cable.
498	LT Cubical Panel, Indoor Type, fabricated out ot 14 SWG CRGA Sheet, duly painted (powder coated), floor mount, having locking arrangement comprising of the following switch and accessories.I. Incoming / Outgoing: ACB EDO 800A FP 50KA = 01 No’sMetering:I. Multifunction Meter = 1 No’sII. CT’s 800/5A = 3No’sIII. RYB Indication Lamps = 1 SetProtection:I. Voltage Monitoring Relay
499	Repairs of the chlorination units as per the following Providing and fixing of the flow control valve with Rota meter and fitting complete one set
500	Flexible copper connector 1.5 0D X1.5 MTR with Auxiliary container valve and gland packing

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Water Purification Tenders

Water Treatment Plant Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Annual Operation And Maintenance Of 20Mgd Water Treatment Plant Rangil Stage Contract 2026-2027 (Under M&R)., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Annual Operation And Maintenance Of 20Mgd Water Treatment Plant Rangil Stage Contract 2026-2027 (Under M&R)., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us