|
| 1 | Creation of 100KVA Sub Station alongwith HT/LT Line at W. No. 01 Indra Colony Hiranagar under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar of Electric Division Kathua on Turnkey Basis |
| 2 | 100 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2 ( new), IS1180 part -1, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 mtrs. Suitable cable of ratings.(Aluminium Wound upto 200 KVA, Copper Wound for 250 KVA or Higher KVA rattings.) |
| 3 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type |
| 4 | 11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type |
| 5 | 11 KV Horn Gap Fuse Set 3 Phase 200A |
| 6 | 185 mm² (2 Ckt) Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type. |
| 7 | 9 Mtr. Long pole (PCC WL -300 KG) |
| 8 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 9 | GI Channel/Angle/Flat of sizes including clamps. |
| 10 | Galvinized Nuts and Bolts. |
| 11 | Earthing of substation -Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thicKNess & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 12 | 11KV Polymeric composite Pin Insulator 12KV, 5KN, Lightening Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 13 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 14 | Wedge connectors/PG clamps |
| 15 | Danger plate with clamps |
| 16 | Anti Climbing Device with clamp |
| 17 | 3 Ph 4 Wire Trivector meter with CT/Prodigy Meter |
| 18 | Cement bottoming 1:2:4 mix as per REC standerds .5 Cum/pole |
| 19 | Laying of HT line on 9 Mtrs. PCC poles with ACSR Weasel Conductor at W. No. 01 Indra Colony Hiranagar under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 20 | 9 Mtr. Long Pole(WL-300 Kg ) |
| 21 | GI V cross-arm with top Bracket including clamp |
| 22 | GI Channel x-arm includingclaps and braces |
| 23 | 30 mm² ACSR Weasel Conductor |
| 24 | PG Clamps for ACSR weasel conductor |
| 25 | 11KV Polymeric composite Pin Insulator 12KV, 5KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 26 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 27 | Galvanized Nuts and Bolts |
| 28 | Danger Plates with Clamp |
| 29 | Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip |
| 30 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 31 | Laying of LT line on 8 Mtrs. PCC poles with ACSR Weasel Conductor on 3 Phase 4 wire at W. No. 01 Indra Colony Hiranagar under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 32 | 8 Mtr. Long Pole(WL-200 Kg ) |
| 33 | GI U-Clamp for Shackle insulators |
| 34 | 16 KN Shackle insulators |
| 35 | 30 mm² ACSR Weasel Conductor |
| 36 | Galvanized Nuts and Bolts |
| 37 | Danger Plates with Clamp |
| 38 | Earthing Complete by GI Pipe 40mm or GI rod 20 mm 2.5 Mtr long through GI Strip |
| 39 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 40 | Erection of 11KV Tapping point at W. No. 01 Indra Colony Hiranagar under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 41 | 9 Mtr. Long Pole(ST-410 SP-33 ) |
| 42 | GI V cross-arm/Horizontal with top Bracket including clamp |
| 43 | GI Channel/ angle iron including Clamps |
| 44 | 11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type |
| 45 | 30 mm² ACSR Weasel Conductor |
| 46 | PG Clamps for 30mm2 ACSR conductor |
| 47 | 11KV Polymeric composite Pin Insulator 12KV5KN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm |
| 48 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 49 | Galvanized Nuts and Bolts |
| 50 | Danger Plates with Clamps |
| 51 | Anti-Climbing Device with Clamps |
| 52 | Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip. |
| 53 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 54 | Cement bottoming 1:2:4 Mix as per REC Standars (0.5cum/pole) |
| 55 | Aluminium Paint |
| 56 | Red oxide paint |
| 57 | Creation of 100KVA Sub Station alongwith HT/LT Line at W. No. 6 near KV School under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar of Electric Division Kathua on Turnkey Basis |
| 58 | 100 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2 ( new), IS1180 part -1, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 mtrs. Suitable cable of ratings.(Aluminium Wound upto 200 KVA, Copper Wound for 250 KVA or Higher KVA rattings.) |
| 59 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type |
| 60 | 11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type |
| 61 | 11 KV Horn Gap Fuse Set 3 Phase 200A |
| 62 | 185mm² (2 Ckt) Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type. |
| 63 | 9 Mtr. Long pole (PCC WL -300 KG) |
| 64 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 65 | GI Channel/Angle/Flat of sizes including clamps. |
| 66 | Galvinized Nuts and Bolts. |
| 67 | Earthing of substation -Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thicKNess & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 68 | 11KV Polymeric composite Pin Insulator 12KV, 5KN, Lightening Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 69 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 70 | Wedge connectors /PG clamps |
| 71 | Danger plate with clamps |
| 72 | Anti Climbing Device with clamp |
| 73 | 3 Ph 4 Wire Trivector meter with CT/Prodigy Meter |
| 74 | Cement bottoming 1:2:4 mix as per REC standerds .5 Cum/pole |
| 75 | Laying of HT line on 9 Mtrs. PCC poles with ACSR Weasel Conductor at W. No. 6 near KV School under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 76 | 9 Mtr. Long Pole(WL-300 Kg ) |
| 77 | GI V cross-arm with top Bracket including clamp |
| 78 | GI Channel x-arm includingclaps and braces |
| 79 | 30 mm² ACSR Weasel Conductor |
| 80 | PG Clamps for ACSR weasel conductor |
| 81 | 11KV Polymeric composite Pin Insulator 12KV, 5KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 82 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 83 | Galvanized Nuts and Bolts |
| 84 | Danger Plates with Clamp |
| 85 | Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip |
| 86 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 87 | Laying of LT line on 8 Mtrs. PCC poles with ACSR Weasel Conductor on 3 Phase 4 wire at W. No. 6 near KV School under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 88 | 8 Mtr. Long Pole(WL-200 Kg ) |
| 89 | GI U-Clamp for Shackle insulators |
| 90 | 16 KN Shackle insulators |
| 91 | 30 mm² ACSR Weasel Conductor |
| 92 | Galvanized Nuts and Bolts |
| 93 | Danger Plates with Clamp |
| 94 | Earthing Complete bu GI Pipe 40mm or GI rod 20 mm 2.5 Mtr long through GI Strip |
| 95 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 96 | Erection of 11KV Tapping point at W. No. 6 near KV School under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 97 | 9 Mtr. Long Pole(ST-410 SP-33 ) |
| 98 | GI V cross-arm/Horizontal with top Bracket including clamp |
| 99 | GI Channel/ angle iron including Clamps |
| 100 | 11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type |
| 101 | 30 mm² ACSR Weasel Conductor |
| 102 | PG Clamps for 30mm2 ACSR conductor |
| 103 | 11KV Polymeric composite Pin Insulator 12KV 5KN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm |
| 104 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 105 | Galvanized Nuts and Bolts |
| 106 | Danger Plates with Clamps |
| 107 | Anti-Climbing Device with Clamps |
| 108 | Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip. |
| 109 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 110 | Cement bottoming 1:2:4 Mix as per REC Standars (0.5cum/pole) |
| 111 | Aluminium Paint |
| 112 | Red oxide paint |
| 113 | Creation of 100KVA Sub Station alongwith HT/LT Line near Bore well at XEN RTIC Office under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar of Electric Division Kathua on Turnkey Basis |
| 114 | 100 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2 ( new), IS1180 part -1, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 mtrs. Suitable cable of ratings.(Aluminium Wound upto 200 KVA, Copper Wound for 250 KVA or Higher KVA rattings.) |
| 115 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type |
| 116 | 11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type |
| 117 | 11 KV Horn Gap Fuse Set 3 Phase 200A |
| 118 | 185 mm² (2 Ckt) Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type. |
| 119 | 9 Mtr. Long pole (PCC WL -300 KG) |
| 120 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 121 | GI Channel/Angle/Flat of sizes including clamps. |
| 122 | Galvinized Nuts and Bolts. |
| 123 | Earthing of substation -Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thicKNess & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 124 | 11KV Polymeric composite Pin Insulator 12KV, 5KN, Lightening Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 125 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 126 | Wedge connectors /PG clamps |
| 127 | Danger plate with clamps |
| 128 | Anti Climbing Device with clamp |
| 129 | 3 Ph 4 Wire Trivector meter with CT/Prodigy Meter |
| 130 | Cement bottoming 1:2:4 mix as per REC standerds .5 Cum/pole |
| 131 | Laying of HT line on 9 Mtrs. PCC poles with ACSR Weasel Conductor near Bore well at XEN RTIC Office under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 132 | 9 Mtr. Long Pole(WL-300 Kg ) |
| 133 | GI V cross-arm with top Bracket including clamp |
| 134 | GI Channel x-arm includingclaps and braces |
| 135 | 30 mm² ACSR Weasel Conductor |
| 136 | PG Clamps for ACSR weasel conductor |
| 137 | 11KV Polymeric composite Pin Insulator 12KV, 5KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 138 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 139 | Galvanized Nuts and Bolts |
| 140 | Danger Plates with Clamp |
| 141 | Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip |
| 142 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 143 | Laying of LT line on 8 Mtrs. PCC poles with ACSR Weasel Conductor on 3 Phase 4 wire near Bore well at XEN RTIC Office under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 144 | 8 Mtr. Long Pole(WL-200 Kg ) |
| 145 | GI U-Clamp for Shackle insulators |
| 146 | 16 KN Shackle insulators |
| 147 | 30 mm² ACSR Weasel Conductor |
| 148 | Galvanized Nuts and Bolts |
| 149 | Danger Plates with Clamp |
| 150 | Earthing Complete bu GI Pipe 40mm or GI rod 20 mm 2.5 Mtr long through GI Strip |
| 151 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 152 | Erection of 11KV Tapping point near Bore well at XEN RTIC Office under AMRUT 2.0 in respect of JPDCL Electric Sub Division Hiranagar |
| 153 | 9 Mtr. Long Pole(ST-410 SP-33 ) |
| 154 | GI V cross-arm/Horizontal with top Bracket including clamp |
| 155 | GI Channel/ angle iron including Clamps |
| 156 | 11 KV GO , AB switch 3 phase , 3 pole , 200 amp vertically type |
| 157 | 30 mm² ACSR Weasel Conductor |
| 158 | PG Clamps for 30mm2 ACSR conductor |
| 159 | 11KV Polymeric composite Pin Insulator 12KV5KN, Lighting Impulse 75KV Positive and 80KVNegative, creepage distance 320mm |
| 160 | 11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm |
| 161 | Galvanized Nuts and Bolts |
| 162 | Danger Plates with Clamps |
| 163 | Anti-Climbing Device with Clamps |
| 164 | Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip. |
| 165 | Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete |
| 166 | Cement bottoming 1:2:4 Mix as per REC Standars (0.5cum/pole) |
| 167 | Aluminium Paint |
| 168 | Red oxide paint Please Enable Macros to View BoQ information |
