|
| 1 | CIVIL WORK:-Earth work in excavation of foundation trenches in ordinary soil except sheet rock and boulders (requiring blasting) including dressing and leveling the bed upto the required depth and depositing the excavated materials away form the site with all leads and lifts. T & P shoring and shuttering if required etc. complete as directed by engineer- in charge. |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalty, taxes of all materials, labours and T & P required for the work etc. complete and as per direction of Engineer-in charge. |
| 3 | C.C.(1:3:6) using 40mm HG metal of approved quality from approved quarry incl. hoisting, compacting curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials,cost of labour and T&p etc. all complete as per the direction of E.I.C. |
| 4 | Brick work with Flyash Bricks in cement mortar (1:6) inhaving crushing strength not less than 75.00 Kg/cm2 immerging the bricks in water not less than six hours with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. |
| 5 | Brick work with Flyash Bricks in cement mortar (1:6) inhaving crushing strength not less than 75.00 Kg/cm2 immerging the bricks in water not less than six hours with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. |
| 6 | R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C. a) Bases of column,footing. |
| 7 | R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C. b) Plinth Band. |
| 8 | R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C. c) Column & Beam |
| 9 | R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C. d) Lintel & Wall band. |
| 10 | R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C. e) Rcc roof slab ,Landing,sun shade & chajja. |
| 11 | Supplying HYSD steel and labour for cutting,bending,binding,tying the grills & placing in position for RCC works including cost of binding wires of 18-20 gauge as per drawing and specification as per drawing, design and direction of Engineer-in-charge. |
| 12 | 16mm thick cement plaster (1:6),finished smooth to brick masonry work in inside surface after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C. |
| 13 | 12mm thick cement plaster (1:6) for brick masonry work in outside surface after racking out joints incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C. |
| 14 | 6mm thick cement plaster (1:4) to R C C surfaces finished smooth including closed deep chiping and slury treatment. Per 1 sqm etc. complete and as per direction of Engineer-in-chaege. |
| 15 | Painting two coats with Weather coat paint two coat and one coat wall primer paint of approved shade including cost conveyance,royality &takes of all material etc.complete. |
| 16 | Painting two coats with approved enamel paint on new wood work or iron work. |
| 17 | Priming one coat with any approved primer over new iron work including cost. |
| 18 | Wall putty two coat with approved putty(Acrylic wall putty), Plastic emulsion paint two coat with one coat primer on Plaster Surface incl. cost of all material, labour and T&P etc. complete. as per the direction of E.I.C. |
| 19 | Supplying,fitting and fixing Kota tiles of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:1) joined with white cement of approved quality including cost of all material ,labour and T&P etc. required for the work all complete as per direction of engineering in charge. |
| 20 | Supplying,fitting and fixing chequred in floor 300mm x 300mm approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:1) joined with white cement of approved quality including cost of all material ,labour and T&P etc. required for the work all complete as per direction of engineering in charge. |
| 21 | Supplying and fixing of GI pressed GI door assembly with polymer powder coated including the cost of all material and fitting etc complete as per direction of engineering in charge. Rate provided by OSEPA. |
| 22 | Supply fitting M S door, window, including Fixing &Fitting. |
| 23 | Recessed wiring to light point/Fan point/Exhaust fan point /call bell point with 1.50sqm FR PVC insulated single core multistrand copper conductor with switch(V.Guard/L7T/Anchor/Havells) etc provision to be paid as per actual.(a) Group-A |
| 24 | Recessed wiring to light point/Fan point/Exhaust fan point /call bell point with 1.50sqm FR PVC insulated single core multistrand copper conductor with switch(V.Guard/L7T/Anchor/Havells) etc provision to be paid as per actual.(b) Group-B |
| 25 | Recessed wiring to light point/Fan point/Exhaust fan point /call bell point with 1.50sqm FR PVC insulated single core multistrand copper conductor with switch(V.Guard/L7T/Anchor/Havells) etc provision to be paid as per actual.(c) Group-C |
| 26 | S/F of 5A Switch & Socket |
| 27 | Circuit Submain Wiring in PVC Conduit. (a)2x1.5sq.mm.+1x1.5sq.mm. |
| 28 | Circuit Submain Wiring in PVC Conduit. (b)2x2.5sq.mm.+1x1.5sq.mm. |
| 29 | S/F of BK Angle Holder |
| 30 | S/F of 48'' A.C. Ceiling Fan Angle Holder |
| 31 | Supply of 9\\" celling fan |
| 32 | S/F of 9 Watt LED Bulb |
| 33 | S/F of 20 Watt LED Batten fitting |
| 34 | S/F of 4 Way MCB D.B. Single Door |
| 35 | S/F of B series SP Way MCB |
| 36 | S/F of 32 Amp DP Main Switch |
| 37 | S/F of standard Earthing |
| 38 | S/F of No.8 SWG Copper Wire. |
| 39 | Disply board. |
| 40 | Black board size 12ft x 4 ft. . |
| 41 | firefighting arrangement |
| 42 | Ramp work for stainless railing Please Enable Macros to View BoQ information |
