|
| 1 | Supply and erection of 07 Mtrs. long swaged / step down type Steel Tubular Pole (Bottom Specification: 6.00m. Length x 139.70mm. O.D x 4.85mm. Thickness, Top Specification: 1.00m. Length x 88.90mm. O.D x 3.25mm. Thickness ) with earth work in excavation of foundation of size 3’-0” x 3’-0” x 3’-0” = 0.76 Cum in all type of soil including rough dressing and leveling the bed etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 2 | Supply of all materials, labor, T&P for providing C.C. (1:1½:3) with hard granite broken chips of size 12mm including cost, transportation, sundries, conveyance, royality of all materials etc. complete as per direction of the Engineer-in-Charge. upto ground level : 1 x 3’-0” x 3’-0” x 2’-8” = 24.00 cft. Couping portion: 1 x 2’-0” x 2'-0\\" x 2’-0” =8cft. |
| 3 | (-) Volume of pole up to top of couping : 3.14 x (0'-5½\\")² /4 x 4'-8\\"= (-) 0.74 cft. = 31.26cft. Or say 0.88cum 6nos. |
| 4 | Supply of all materials, labour, T&P and transportation for centering and shuttering of the couping portion etc. complete as per direction of the Engineer-in-Charge. 4 x1’-6” x 1’-6” =9 sq.ft. Or say 0.83 sqm 6nos. |
| 5 | Supply and fixing of 4 Arm Bracket having the following specification with welding of 1’-6” medium gauge M.S. Pipe bended at an angle of 120º and top cover of dia 3½\\" fixing in the top of Tubular pole including cost of materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge. |
| 6 | Supply and laying of size 04 core x 10 sq.mm PVC insulated PVC sheathed armoured underground aluminium cable for power supply from light pole to light poles including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. (Make- MESCAB / POLY CAB or equivalent) |
| 7 | Supply and erection of galvanized 'D' iron complete with suitable pole clamp 75mm x 88mm porcelain shackle insulator, 16sqmm string wire & 15mm dia galvanized bolt & nut including painting. |
| 8 | Supply and fixing of Galvanized stringing screw 12\\" x 5/8\\" dia. |
| 9 | Supply and fixing of lighting Fixtures of 120 Watt. LED Street Light having powder coated pressure die-cast Aluminum housing Clear toughened glass having following specification: |
| 10 | LED : LM80 certified high power LED |
| 11 | Lens : Suitable secondary lens for better light distribution |
| 12 | Gear : Integral, Electronic constant current driver of min. 85% efficiency |
| 13 | Internal Wiring : Teflon insulated, Cu. Conductor |
| 14 | Hardware : SS & Ms zinc plated & passivity |
| 15 | Ingress protection : IP66 |
| 16 | Lumen maintenance : 50,000 Hrs @ L70 |
| 17 | Operating temperature : -10ºC to 50ºC |
| 18 | Rated voltage & frequency : 240V, 50Hz AC |
| 19 | Wattage : 120±10% |
| 20 | Current : < 0.65A |
| 21 | Pf : > 0.95 |
| 22 | Ithd : < 10% |
| 23 | Lumen : 14400 lm |
| 24 | Efficacy : >120lm/W |
| 25 | CCT: 5700K |
| 26 | CRI : >70 |
| 27 | IK Rating : IK10 |
| 28 | Protections: Open & Short circuit protection, reverse polarity protection and surge protection. (Make: Bajaj/ Havells/ Crompton/ Jaquar/ HPL/ Wipro). Manufacture test certificate of fitting to be submitted after completion of the work satisfactorily. Three Years On-Site Maintenance. |
| 29 | Supply and fixing of 3 phase outdoor type panel board made of 16 SWG- C.R sheet of size 3'-0\\" x 2.'-0\\" x 1'-5\\" ( L x B x D) with epoxy grey powder coated. The panel board consisting of the following accessories. |
| 30 | (i) Neon Indicator - 3 nos. |
| 31 | (ii) Ring Copper Socket - 4 nos. |
| 32 | (iii) 3 phase Timer - 1 no. |
| 33 | (iv) Toggle Switch - 1 no. |
| 34 | (v) 63 Amp 4 pole Contactor - 1 no. |
| 35 | (vi) 3 phase 63 Amp 4 pole MCB-2 nos. |
| 36 | (vii) Stud Connector 4 way, 1 no. |
| 37 | (viii) 3 Phase Copper Bus bar - 4 nos. |
| 38 | (ix) Danger Board - 1 no. with complete wiring with 10sq.mm / 4sq.mm / 2.5sq.mm copper wire as per direction of the E.I.C. Three Years On-Site Maintenance. |
| 39 | Supply & fixing of 8\\" x 10\\" G.I junction box with locking arrengement, welded with G.I tubular pole having connector and MCB to be fix inside the box for power supply to Semi Highmast fittings. |
| 40 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required. |
| 41 | Supply and laying 6 SWG G.I wires ISI marked at 0.5 meter below ground level for conductor earth elctrode including soldering etc. as required. Please Enable Macros to View BoQ information |
