|
| 1 | M&L for urface excavation of soft soil n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 2 | M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/Loose soil complete all as specified and directed. |
| 3 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/loose soil complete all as specified and directed |
| 4 | M&L for removing excavated material/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L for cement concrete 1:4:8 Type D2 (40mm Graded aggregate) in foundations, filling and mass concrete complete all as specified and directed |
| 6 | M&L for brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 7 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) complete all as specified and directed. |
| 8 | M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 9 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 10 | M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed. |
| 11 | M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 12 | M&L for preparing new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 13 | M&L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 14 | M&L pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | S&F 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm ar main runner 25x25x1.25mm, thick aluminium Tee as cross runner and aluminium angle of size 25x25x 1.25mm, at the perimeter including GI 6mm aluminium suspender of required length of any description complete all as specified and directed. |
| 16 | M&L 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 17 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 18 | M&L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 19 | M&L 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 20 | M&L 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base of floor complete all as specified and directed |
| 21 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed |
| 22 | M&L Formwork to sides and soffits of floor or roof beams, beam haunching’s, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed |
| 23 | M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 24 | M&L RCC M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 25 | M&L RCC M-25 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 26 | M&L RCC M-25 in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 27 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed, |
| 28 | M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 29 | M&L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 30 | M&L Glazed ceramic coloured tiles (Designer) in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles complete all as specified and directed. |
| 31 | M&L for brickwork with old size, subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 32 | M&L 15mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 33 | M&L 20mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 34 | S&F 15mm dia chromium plated fancy type bib taps (two way), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 35 | S&F 15mm dia Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 36 | S&F 15mm dia chromium plated fancy type concealed Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 37 | S&F stainless steel Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 38 | S&F 10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 39 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 40 | S&F Vitreous China wash down water closet pan (pedestal pattern), white, (excluding flushing cistern and flush pipe) including seat and cover fixing bolts complete all as specified and directed. |
| 41 | S&F Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union 125mm size complete all as specified and directed. |
| 42 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 43 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 44 | S&F PVC (SWR) pipes110mm Dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 45 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 46 | S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 47 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 48 | S&F PVC (SWR) bend 110mm dia any radius complete all as specified and directed. |
| 49 | Supply & fixing 1000 liter capacity ISI marked double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed. |
| 50 | S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed. |
| 51 | S & F gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 52 | S & F gun-metal, globe or gate valves of 15mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 53 | S&F PVC (SWR) 75mm outlet dia floor trap/Nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 54 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 55 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 56 | S&F 100mm butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 57 | S&F Aluminium handles 100mm long, cast type, anodised complete all as specified and directed. |
| 58 | S&F Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed. |
| 59 | M&L 2nd class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 60 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 61 | M&L for cement concrete 1:3:6 type C1 20mm graded stone aggregate as in bed block to hold fast block and other similar works etc complete all as specified and directed. |
| 62 | S&F 30mm thick glazed and skeleton shutters for window & ventilator open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.24 (b) in 2nd class soft wood complete all as specified and directed. |
| 63 | S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 64 | S&F Sheet glass, 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 65 | M&L for applying two coats of synthetic enamel on new wooden surface (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of surface complete all as specified and directed. |
| 66 | S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed. |
| 67 | M&L RCC 1:2:4 type B-1 using 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 68 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 69 | M&L 100 mm thick Cement concrete Type B-1, 1:2:4 (20mm graded aggregate) as in flooring complete all as specified and directed. |
| 70 | M&L Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed |
| 71 | S&F 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 72 | S & F vitreous China wash basin with pedestal , white, flat back, size 550 x 400 mm including one no 15mm bore fancy type mixer taps with hot & cold, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No PVC waste pipe 25 mm dia and 75 cm long with 32 mm dia connector, 32mm size waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed complete including cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 73 | M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 74 | M&L for 15 mm thick cement plaster in CM 1:4 other than fair faces of brick work or as a screed bed for vertical surfaces of external wall complete all as specified and directed. |
| 75 | M&L for 15mm thick rendering on fair faces of brick work/concrete surfaces in CM 1:6 finishing the surface fair & even complete all as specified and directed. |
| 76 | M&L for mild steel work as in roof trussed (framed) purlins crane gantries rail & fastening and heavy bracket (beam tea angle channel or flat section) including distance pieces cleats of grade FE 410W (E 250) Quality-A etc complete all as specified and directed. |
| 77 | M&L Material and labour for preparing the new plastered surfaces of walls up to any height and applying two coats of white wash complete all as specified and directed. |
| 78 | M&L for 100mm thick PCC type D2 1:4:8 (40 mm graded crushed stone aggregate) as in sub base of hardstanding/ path complete all as specified and directed. |
| 79 | M&L for 100 mm thick in Hardstanding/Path PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed. |
| 80 | M&L for coloured glazed ceramic tiles (450X300 mm) x 7mm thick as in vertical surfaces such as skirting, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and over 15mm thick backing coat in CM (1:4) laid complete all as specified and directed. |
| 81 | M&L Non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm and n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed. |
| 82 | S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 83 | M&L for providing precast cement concrete type B-1 1:2:4 (20 mm graded aggregate) in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar in 1:4. with joints to match complete all as specified and directed. |
| 84 | M&L for Vitreous China Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed. |
| 85 | S&F vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 86 | M&L for Soap dish chromium plated complete all as specified and directed |
| 87 | M&L for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed. |
| 88 | S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed. |
| 89 | M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and directed. |
| 90 | M&L for PVC (SWR) Reducer 110/75mm dia complete all as specified and directed. |
| 91 | M&L for lagging on pipe of internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9843 complete all as specified and directed. |
| 92 | M&L for construction of Soakage well, of size 1.2 m dia at bottom and 1.5 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications. |
| 93 | Rough excavation not exc 1.5 mtr deep and getting out soft/Loose soil Complete all as specified and directed |
| 94 | Excavating over areas, exc 30cm deep , and getting out in soft/Loose soil Complete all as specified and directed |
| 95 | M&L Walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in cm 1:4 Complete all as specified and directed. |
| 96 | M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 97 | M&L for providing, cement concrete 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided in , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 98 | M&L for providing precast cement concrete 1:3:6 Type C1 (20mm graded aggregate) as in bonders for stone walling and set in cement mortar 1:4 complete all as specified and directed |
| 99 | M&L for boulder filling dry, hand packed tightly and thickness at back of wall etc and raising or lowering to required level complete all as specified and directed |
| 100 | M&L Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed |
| 101 | Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0mm thick hylam sheet cover fixed with brass screw complete with all accessories for on light point/ Fan point controlled by one, 1-Way switch complete all as specified and directed. |
| 102 | All as per item No 101 mentioned here-in- above but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete. |
| 103 | All as per item No 101 mentioned here-in- before but 6 pin15 Amps socket outlet on independent board with 4 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing. |
| 104 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 105 | M & L for Switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as specified and directed. |
| 106 | M & L for Switch socket combination 5 in 1, 3 pin, 6 Amp and 16 Amps flush type universal complete all as specified and directed. |
| 107 | Supply and fix, water heater storage type, electric capacity 25 ltr along with all accessories BEE 5 star rated complete all as specified and directed. |
| 108 | M & L for ceiling rose, PVC/Polycarbonate three terminals complete all as specified and directed. |
| 109 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 110 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 111 | S & F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 112 | S & F of Exhaust fan 250 mm Sweep with louver shutters, Plastic exhaust fan AC 230V, 50 Hz complete with fixing arrangement and connection complete all as specified and directed. |
| 113 | M & L sheet metal enclosure for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete all as specified and directed. |
| 114 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and directed. |
| 115 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed. |
| 116 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 16 sqmm complete all as specified and directed. |
| 117 | M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning, filling in and removal of surplus soil upto 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 5 |
| 118 | S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 10 sqmm complete all as specified and directed. |
| 119 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed. |
| 120 | Supply and fixing in replacement Circular/Square (as per site Requirement) shape 15 watt 220 volts AC motion Sensor cool white/Warm white light (6500 K)/Warm white (2700 to 3000 K), surface mounted/recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 121 | M&L for Cutting of existing steel tubing for alteration or additions and insertion of Tee 20x20x20mm, union, socket complete all as specified and directed. |
| 122 | S&F GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and directed. |
| 123 | S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25mm complete all as specified and directed. |
| 124 | Supply, Installation, testing and commissioning of silent type Diesel Engine driven generating set with Governing class G2 including sound reducing canopy (sound level not more than 75 db at a distance of 1 mtr) 14 gauge as per guideline issued by Ministry of Environment & forest notification, & Central pollution control board 415 volts, 3 phase, 50 Hz supply |
| 125 | complete with panel for automatic starting on main failure control panel suitable for giving an output of 7.5 KVA after considering derating factor at 1600 metre altitude above mean sea level and capable of operating between temperature range (-20) degree C to 40 degree C at Kupwara Area (J&K) and alternator of suitable capacity and RPM coupled with each other with flexible coupling mounted on Antivibration pads on foundations recommended by manufacture. The DG set shall comprise of auto change main to generator and vice versa electric starter motor with batteries, turbocharger, water cooled & comprising all standard fittings, fixtures & all piping etc as below :- (a) Alternator : Directly coupled with Engine and suitable to produce 415 volts, 3 phase 4 wire system, 50 Hz 0.8 PF @1500 RPM of capacity 7.5 kVA all as per as per IS: 13364 and up to date amendments with H class insulation, self excited, self regulated, screen protected drip proof type with two end shield ball/Roller bearing with damper winding in each pole complete all as specified and directed. |
| 126 | (b) Engine : Water cooled Deisel Engine (CPCB IV Norms Compliance) developing Min 10 BHP or as recommended by the manufacturer for 1600 mtr altitude having Self start engine (including batteries with provision of charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per OEM), as per IS:10001/ 10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 RPM industrial type as per BS-649 or IS-1601 with AI electronic governor suitable to regulate speed of DG set from No load to full load completed with fuel tank of cap as per manufacturer recommendations, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer mufflers etc for continuous operation and standard accessories, sump pre heaters, cold start kit etc all as specified and directed. (c) Canopy : Canopy enclosure shall be powder coated and fabricated after passing through seven tank processes16 SWG CRCA MS sheet and Lockable doors should be provided in Canopy with lockable fuel filling arrangement . The exhaust system and noise suppressor shall be provided with thermal insulation by using fire retardant/non igniting foam conforming to BIS 7888/BS 4375 to prevent excess heat radiation on the engine and safe for operator. Absorption type non‐resistance Residential Silencer shall be provided to suppress exhaust noise from the engine. (d) Alignment and Fuel Tank : Alternator and Engine aligned on a common 14 SWG CRCA MS base frame complete with MS Fuel Tank, fabricated out of 16 SWG CRCA MS Sheet and is part of base frame. Please Enable Macros to View BoQ information |
| 127 | (b) Engine : Water cooled Deisel Engine (CPCB IV Norms Compliance) developing Min 10 BHP or as recommended by the manufacturer for 1600 mtr altitude having Self start engine (including batteries with provision of charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per OEM), as per IS:10001/ 10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 RPM industrial type as per BS-649 or IS-1601 with AI electronic governor suitable to regulate speed of DG set from No load to full load completed with fuel tank of cap as per manufacturer recommendations, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer mufflers etc for continuous operation and standard accessories, sump pre heaters, cold start kit etc all as specified and directed. (c) Canopy : Canopy enclosure shall be powder coated and fabricated after passing through seven tank processes16 SWG CRCA MS sheet and Lockable doors should be provided in Canopy with lockable fuel filling arrangement . The exhaust system and noise suppressor shall be provided with thermal insulation by using fire retardant/non igniting foam conforming to BIS 7888/BS 4375 to prevent excess heat radiation on the engine and safe for operator. Absorption type non‐resistance Residential Silencer shall be provided to suppress exhaust noise from the engine. (d) Alignment and Fuel Tank : Alternator and Engine aligned on a common 14 SWG CRCA MS base frame complete with MS Fuel Tank, fabricated out of 16 SWG CRCA MS Sheet and is part of base frame. Please Enable Macros to View BoQ information |
