|
| 1 | 1 Sub Estimate : - M&R to W/S/S in TIA ….. Annual maintenance contract of EOT cranes at Raw water pump house, New WTP Pure water pump house, chlorine room in TIA. |
| 2 | 1) Overhauling & Servicing of electrically operated Circular & Horizontal overhead cranes with oiling, greasing, adjustment & alignment of breakshoes, electromagnetic switches, pendant instrument clusters, longitudinal, cross & Vertical travels, ON/OFF i.e start/ stop mechanism, wire ropes, chain pulley blocks, slings, safety & or non reverse rachets, antifriction arrangements etc. complete with issuance of test certificates as required by annual inspecting relevant authorities. Upto 5 MT Capacity |
| 3 | 2) Spares of EOT Crane |
| 4 | 2.1) Supplying & erecting of all motion rotary limit switch |
| 5 | 2.2) Supplying & erecting of break coil for 5.0 MT cranes. |
| 6 | 2.3) Supplying & erecting of wire rope 16/20 mm 3x36 steel core. |
| 7 | 2.4) Supplying & erecting C45 pullies 350mm dia. |
| 8 | 2.5) Supplying & erecting of 8 way pendent. |
| 9 | 2.6) Supplying & erecting of dog chain for support to copper cable. |
| 10 | 2.7) Supplying & erecting of cable trolley for 2.0 MT to 5.0 MT EOT crane |
| 11 | 2.8) Supplying & erecting Transformer of 110 volt in panel box. |
| 12 | 2.9) Supplying & erecting BBR (Breaking Resistance) on panel mounting |
| 13 | 2.10) Supplying & erecting Pendent cable of size 2.5 Sqmm x 16 core. |
| 14 | 2.11) Supplying and erecting thermal Overload Relay for motor starter suitable for up to 12.5 HP. |
| 15 | 2.12) Rewinding charges for Main Hoist 3Phase Induction motor |
| 16 | 2.13) Rewinding charges for LT & CT 3 Phase Induction motor |
| 17 | 2.14) Replacement of SKFmake ball bearing for main Hoist motor |
| 18 | 2.15) Replacement of SKFmake ball bearing for LT Trolley |
| 19 | 2.16) Replacement of SKFmake ball bearing for CT Trolley |
| 20 | 3) Miscellaneous |
| 21 | 3.1) Supplying and erecting four pole power contactor 430V, 16A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 22 | 3.2) Supplying and erecting four pole power contactor 430V, 40A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 23 | 4) LT Cables (Copper) (CB-LT/CU) |
| 24 | 4.1) Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 25 | 2 Sub Estimate : - M&R to UDDS in TIA ….. Annual maintenance contract of EOT cranes at UDDS Sump No.1,2,3 & 5 in TIA. |
| 26 | 1) Overhauling & Servicing of electrically operated Circular & Horizontal overhead cranes with oiling, greasing, adjustment & alignment of breakshoes, electromagnetic switches, pendant instrument clusters, longitudinal, cross & Vertical travels, ON/OFF i.e start/ stop mechanism, wire ropes, chain pulley blocks, slings, safety & or non reverse rachets, antifriction arrangements etc. complete with issuance of test certificates as required by annual inspecting relevant authorities. Upto 5 MT Capacity |
| 27 | 2) Spares of EOT Crane |
| 28 | 2.1) Supplying & erecting of all motion rotary limit switch |
| 29 | 2.2) Supplying & erecting of break coil for 5.0 MT cranes. |
| 30 | 2.3) Supplying & erecting of wire rope 16/20 mm 3x36 steel core. |
| 31 | 2.4) Supplying & erecting C45 pullies 350mm dia. |
| 32 | 2.5) Supplying & erecting of 8 way pendent. |
| 33 | 2.6) Supplying & erecting of dog chain for support to copper cable. |
| 34 | 2.7) Supplying & erecting of cable trolley for 2.0 MT to 5.0 MT EOT crane |
| 35 | 2.8) Supplying & erecting Transformer of 110 volt in panel box. |
| 36 | 2.9) Supplying & erecting BBR (Breaking Resistance) on panel mounting |
| 37 | 2.10) Supplying & erecting Pendent cable of size 2.5 Sqmm x 16 core. |
| 38 | 2.11) Supplying and erecting thermal Overload Relay for motor starter suitable for up to 12.5 HP. |
| 39 | 2.12) Rewinding charges for Main Hoist 3Phase Induction motor |
| 40 | 2.13) Rewinding charges for LT & CT 3 Phase Induction motor |
| 41 | 2.14) Replacement of SKFmake ball bearing for main Hoist motor |
| 42 | 2.15) Replacement of SKFmake ball bearing for LT Trolley |
| 43 | 2.16) Replacement of SKFmake ball bearing for CT Trolley |
| 44 | 3) Miscellaneous |
| 45 | 3.1) Supplying and erecting four pole power contactor 430V, 16A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 46 | 3.2) Supplying and erecting four pole power contactor 430V, 40A for time switch complete erected on provided wooden block/ box, with necessary materials. |
| 47 | 4) LT Cables (Copper) (CB-LT/CU) |
| 48 | 4.1) Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU Please Enable Macros to View BoQ information |
