|
| 1 | Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of mixed soil , ordinary rock and hard rock .All work of rock cutting by blastingshall be carried out by taking all necesary precautions against soil erosion ,damages to hill side ,water pollution etc. and to protect stability of hill side .Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited) .All earth work in cutting /excavation including rock excavation shall be carried out true to lines ,grades ,sides slopes,width,camber,super-elevation and level as shown on the drawing and as directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600 to achive designed formation width including hauling and stacking of materials useful for constrcution at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its levelling, fine dressing and carriage of machineries, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. During the mobilisation period, contractor should take the advanced x-sec in 15 m interval of whole road length in the presence of Engineer-in-charge or his representative. In case the advanced x-sec has been taken in the presence of Engineer-in-Charge representative, in that case the same has to be got approved from Engineer-in-Charge. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account,filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-charge for smooth riding .The recovery for stones ,whether usefule or not for 1352.28cum. (One Thousand three hundred sixty fifty two point twenty eight Cubic Metre) in all cases, @ Rupees 300/= only (Rupees three Hundred) per cubic metre shall be effected on prorata basis in all circumstances .Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor ,which shall have to be duly compensated by him in all cases.. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 3 | Providing and laying concrete Mechanically mixed and vibrated 1:6:12 (one cement: six sand : twelve graded stone aggregates 40 mm (forty millimetre) nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification section 800 and 1200 curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 4 | Providing and laying concrete mechanically mixed and vibrated PCC M-10 (Ten) nominal mix 1:3:6(one cement : three sand : six aggregate) design mix with cement contents not less than 220kg (two hundred Twenty kilogram per cubic metre) with 40 mm (Forty millimeter) nominaal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 5 | Providing and laying concrete mechanically mixed and vibrated grade M-15 (M-fifteen) nominal mix 1:1.5:3 (one cement : one point five sand:three aggregate) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) with aggregate 40 mm (forty millimeter) nominaal size for plain/reinforced concrete substructure complete as per drawings and MoRD technical specificcation section 800, 900,1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying concrete Mechanically mixed and vibrated 1:4:8 (One Cement : four sand : eight graded crushed stone aggregate 25 mm (Twenty five milimetre) nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawing and MoRD technical specification rural roads section 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 7 | Construction of dry rabble masonry for retaining walls, breast walls, revetment walls and parapets etc. for sub structure and super structure complete as per drawing and technical specification section 700 and 1300 including and hauling of materials in all leads and lifts and as per entire satisfaction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 8 | Stone masonry work in cement mortar in (1:6) (one cement : six sand) for substructure complete as per drawing and technical specifications section 700 & 1200. including and hauling of materials in all leads and lifts and as per entire satisfaction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 9 | Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 10 | Providing weapholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred milimetre) dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specifications section 1200 and as per entire satisfaction,directin by Engineer-In-Charge and including carriage of materails with in all leads and lifts.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 11 | Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600 including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 12 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP3 (Non Pressure-three) of 1000 (One thousand) milimetre internal dia metre for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement : two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 13 | Providing and erecting W metal beam crash barrier comprising 3 mm (three milli meter) thick corrugated sheet metal beam rail 70 cm (Seventy centimetre) above road/ground level fixed on ISMC series Channel vertical part of 150 mmx75 mmx 5 mm (One Hundred fifty Milli meter x seventy five Millimeter x Five milli meter ) special 2.00 metre ( Two Metre ) center to center 1.80 metre ( One point Eighty Metre) high 1.10 metre(one Point Ten Meter ) below ground road level all steel parts and filaments to be galvanized by hot dip process, a fitting to confirm to IS 1367 and IS-1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 mmx75 mmx5 mm (One Hundred fifty Milli meter x seventy five Millimeter x Five milli meter ), 330 mm ( Three Hundred Milli Meter )long complete as per MORTH Specification section 800 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 14 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 300 & 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 15 | Construction of Granular Sub-Base(Grade-1(one)) by providing well graded materials, as per table 401 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I(one) Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 16 | Providing, laying, spreading and compacting stone aggregates of specific sizes 63 mm to 45 mm (sixty three millimeter to forty five milimeter ) Grading-II, 75mm (Seventy five millimeter) consolidated thick to water bound macadam specification including spreading in uniform thickness,using template hand packing, rolling with three wheel 80-100 (eighty to hundred)static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2 mm (eleven point two millimeter) niminal size at the rate of 0.18cum (zero point one eight cubic metres) per 10 square meter (Ten) and to fill up the interstices of course aggregate, watering and compacting to the required density as per M.O.R.D. 2014 technical specifications clause 1701 by mechanical means as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 17 | Providing, laying, spreading and compacting by mechnical means of crushed stone aggregate size 53mm to 22.4mm ( fifty three millimetre to twenty two point four millimetre) Grading-III 75mm( seventy five millimetres) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. (eight to one hundred) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.18cum (zero point one eight cubic metres) per ten square metres and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 18 | Providing and applying primer coat with bitumen emulsion ( Emulsion SS-1(H)) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm (zero point seventy to one kilogram per square meter) using mechanical means as per Technical Specification Clause 502 as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 19 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kgper sqm ( zero point two zero to zero point two five kilogram per square meter ) on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 20 | Providing, laying and rolling of Cold Mix close-graded premix surfacing material of 20 mm(twenty millimeter) thickness composed of 11.2 mm to 0.9 mm (eleven point two millimeter to zero point nine millimeter) (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN (eight- ten kilonewton) static roller and finishing to required level and grades as per technical specification IRC:SP:100-2014 as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 21 | Formwork of plastic cells should be made of High Density Polyethylene (HDPE), sheets having thickness ranging from 0.20-0.22MM (zero point two zero millimetre to zero point two two millimetre)with sides 150MMx150MM (one hundred fifty millimetre * one hndred fifty millimetre) and height as fixed by engineer in charge. Cells should be stitched using thread, thus ensuring optimum joint strength. Joint strength should be a minimum of 2(two) Kilo Newton per metre. Heat welded cells should not be procured as they are not able to withstand the tension and often break when they are laid in the full width of the carriageway. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 22 | Construction of unlined surface drains of average cross sectional area 0.40 sqm (zero point fortey square meter ). in soil to specified lines grades levels and dimensions .Excavated materials to be used in embankment with a lift up to 3 m (three meter ) band lead of 50 m (fifty metre) (average lead 25 m (twenty five metre) ) as per technical Specification section 300 as per the entire satisfaction and direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 23 | Providing and fixing \\"Citizen Information Boards\\" as per specifications and drawings Two MS Plates of 1.60mm (one point sixty milimeter) thick duly welded with MS angle iron frame 25mmx25mmx5mm (twenty five millimetre x twenty five millimetre x five millimetre) on edges supported with 2Nos(two numbers) horizontal posts made of 75mmx75mm (seventy five millimetre x seventy five millimetre) of 125 (one hundred twenty five) SWG Steel tube duly embanded in and including cement concrete M-15 (fifteen) grade blocks of 600mm x600x750mm (six hundred millimetre x six hundred millimetre x seven hundred fifty millimetre) below ground level. All MS will be stove enameled both side lettering and printing arrows border etc will be painted with ready synthetic enamel paint of superior quality in required shade and colur. all sections of posts and steel tube will be primer and two coats of epoxy point as per drawing. and technical specification section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. he rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 24 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm (one point six millimetre) thick, top and middle plate duly welded with MS flat iron 25mm x 5mm (twenty five millimetre into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm (twenty five millimetree * twenty five millimetre * five millimetre) . The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 (two) nos. 75mm x 75 mm (seventy five millimetre*seventy five millimetre) of 12(twelve) SWG sheet tubes posts duly embedded in cement concrete M-15 (fifteen) grade blocks of 450mm x 450mm x 600mm (four hundred fifty millimetre*four hundred fifty millimetre*six hundred millimetre) , 600mm ( siux hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm (fourty seven milllimetre*fourty seven milllimetre) of 12(twelve) SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be paintedThe rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. with primer and two coats of epoxy paint as per drawing & MORD Specification section 1700 and Annexure 1700.1 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 25 | Providing and erecting direction and place identifications of semi reflective sign boards up to 0.90 sqm as per IRC:67 made of 2 mm ( 2 millimeter ) thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm (seventy millimeter )width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm (forty seven millimeter x forty seven millimeter ) of 12 (twelve) SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm (twenty five millimetre x five millimetre) M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm (four Hundred Fifty millimeter x Four Hundred Fifty millimeter x Six Hundred millimeter) , 600 mm (Six Hundred millimeter) below ground level as per approved drawing and MoRD Technical Specification Section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 26 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm ( one point Five millimeter) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimeter ) width and required letters and figures with reflective tape engineering grade as per MORD technical specification section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 (forty seven millimeter x forty seven millimeter x twelve millimeter ) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm (four Hundred Fifty millimeter x Four Hundred Fifty millimeter x Six Hundred millimeter), 600 mm (Six Hundred millimeter) below ground level as per approved drawing (600 mm equilateral & triangle) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 27 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm (one pont five ) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 (forty seven millimeter x forty seven millimeter x twelve ) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade(fifteen) cement concrete 450x450x600 mm (four hundred fifty millimetre x four hundred fifty millimetre x six hundred millimetre), 600mm (six hundred millimetre) below ground level as per approved drawing section 1700 (800mmx600mm rectangular) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 28 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm (one pont five ) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm(sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per MORD technical specification section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 (forty seven millimeter x forty seven millimeter x twelve ) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (fifteen) grade cement concrete 450x450x600 mm (four Hundred Fifty millimeter x Four Hundred Fifty millimeter x Six Hundred millimeter), 600 mm (Six Hundred millimeter) below ground level as per approved drawing (chevron sign board) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 29 | Providing 10 (ten) nos rumble strips covered with bituminous carpet, 15-20 mm (fifteen -twenty millimetre) high at center, 250 mm (two hundred fifty millimetre) wide placed at 1 m (one meter ) center to center at approved locations to control speed, marked with white strips of road marking paint as per drawing and Technical Specification including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 30 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm(one point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm(sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12mm (fourty seven into fourty seven into twelve millimetre) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 (fifteen)grade cement concrete 450x450x600 mm (four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm (six hundred millimetre) below ground level as per approved drawing Clause 1701.2.2(Cautionary circular 600 mm) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 31 | Providing and laying of Hot applied thermoplastic compound 2.5 mm (trwo point five milimeter) thick including reflectorising glass beads at the rate of 250 gms (Two hundred fifty grams) per sqm area, thickness of 2.5 mm (two point five milimeter) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 32 | Providing and fixing hazard marker of size 900x300 mm ( nine hundred x three hundred millimeter ) made of 2mm ( two millimetre) thick aluminum sheet with back support of M.S. angle 25x25x3 mm (twenty five millimetre x twenty five millimetre x three millimetre).as per section 1700 of RT&H specifications compete board process by heat treatment process. Hi grade sheeting or front side and provided with by post of ht. 1. 50 mtr ( one pont fifty meter ) made of M.S. angle 50x50x6 mm (fifty millimeter x fifty millimeter x 5 millimeter ) fixed in C.C. 1:2:4 ( one cement : two Sand : four Aggregates ) back of size 600x600x600 (six hundred x six hundred x six hundred ) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 33 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (eighty -hundred centimeter )high above ground level, painted black and white in 15 cm(fifteen centimeter ) wide strips, fitted with 80 x 100 mm (eighty x hundred millineter ) rectangular or 75 mm ( seventy five mm ) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing of road stud 100x 100 mm (one hundred x one hundred millimetre) , die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm (thirty millimetre) upto a depth of 60 mm (sixty millimetre) and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973( section 1700) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 35 | Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (ordinary kilometer stone precast). including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 36 | Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (200 meter stone pre cast) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 37 | Reinforced cement concrete Mechanically mixed and vibrated M-15(fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (5th kilometer stone pre cast). including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 38 | Routine Maintenance after completion of construction work as per terms and condition of bid document that is 7c(vi) of contract data to general condition of contract and technical specifications of Ministry of Rural Development for rural roads August 2004 for rural roads including hauling /carriage of all labour equipment and materials to various locations through all modes of transportation in all leads and lifts to the entire satisfaction of the Engineer in charge. As per rates Specified in Bidding Documents. Please Enable Macros to View BoQ information |
| 39 | Routine Maintenance after completion of construction works including hauling/carriage of all labour equipement and material to various locations of site through all modes of transportation in all leads and lifts to the entire satification of Eingineer in Charge. |
| 40 | Maintenance cost for 1ST year |
| 41 | Maintenance cost for 2nd year |
| 42 | Maintenance cost for 3rd year |
| 43 | Maintenance cost for 4th year |
| 44 | Maintenance cost for 5th year |
