|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 4 | For thickness of tiles 10 mm to 25 mm |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 6 | In cement mortar |
| 7 | Dismantling 15 to 40 mm dia G.I. pipe including stacking ofdismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge. i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 8 | 15 mm to 40 mm nominal bore( Internal Work- Exposed on wall) |
| 9 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead :as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 10 | Of area 3 sq. metres and below |
| 11 | Supplying and filling in plinth with sand/ stone under floors, including watering, ramming, consolidating and dressing complete.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 13 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from naturalsources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 15 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 16 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 18 | 15 mm cement plaster on rough side of single or half brick wall of mix :as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 19 | 1:4 (1 cement: 4 coarse sand) |
| 20 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approve manufacturer, of required shade and colour complete, as pe manufacturer's specification.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 21 | Two or more coats on new work |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge. i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 23 | 20 mm nominal dia Pipes |
| 24 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 25 | 75 mm diameter |
| 26 | 110 mm diameter |
| 27 | Angle Cock |
| 28 | P/F CPVC FTA/MTA 20mm |
| 29 | P/F CPVC Brass Tee |
| 30 | P/F CPVC Brass Elbow |
| 31 | P/F UPVC Floor Trap 75 mm |
| 32 | Providing and fixing PTMT grating of approved quality and colour.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 33 | 100 mm nominal dia |
| 34 | P/F Hand Grip 600mm Grab Bar.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 35 | P/F Hand Grip 450mm Grab Bar.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 36 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals |
| 37 | For fixed portion |
| 38 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of gradeAC 15) |
| 39 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 40 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of gradeAC 15) |
| 41 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 42 | 125mm |
| 43 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 44 | 150x10 mm |
| 45 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 46 | With frosted glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 47 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 48 | W.C. pan with ISI marked white solid plastic seat and lid |
| 49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the wallswherever require:as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 50 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete. as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 52 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 53 | Flexible pipe. 32 mm dia |
| 54 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 55 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colours.as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 56 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 57 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :as per direction of Engineer - in - charge i/c intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 58 | 15 mm nominal bore |
| 59 | Providing and fixing uplasticised PVC connection pipe with brassunions:as per direction of Engineer - in - charge including intire carriage of mateirial in all leads and lifts, hight and cost of all other incidentals. |
| 60 | 45 cm length |
| 61 | 20 mm nominal bore |
| 62 | P/F Health Faucet Please Enable Macros to View BoQ information |
