|
| 1 | Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | S&F Non skid ceramic colour tiles (400x400)x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | S&F Non skid ceramic colour tiles (400x400)x 7 to 8mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 4 | S&F Glazed ceramic tiles (450x300)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 5 | M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed. |
| 6 | M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed. |
| 8 | M&L PCC 1:2:4 (Type B1 using 20 mm graded stone aggregate) levelling course average thick 40 mm, to match the undulations of roof complete all as specified and directed. |
| 9 | M&L rendering 10 mm thick on fair faces of concrete surface in CM 1:3 to receive the roof finishes with water proofing liquid complete all as specified and directed. Note : WPL Shall be measured and paid separately |
| 10 | M&L fillet of 75mm size using PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) at the junction of all horizontal and vertical surfaces complete all as specified and directed. |
| 11 | Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms /sqm) laid over primer surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by torched application complete all as specified and directed.Four course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm.(b) Laying of APP based membrane as specified thickness and weight.(c) Applying two coats of aluminium paint @ 100ml/sqm. |
| 13 | Taking down chowkhat n exc 1.5 sqm each without taking of shutter from frame complete all as specified and directed. |
| 14 | Taking down chowkhat exc 1.5 sqm and n exc 4.00 sqm each without taking of shutter from frame complete all as specified and directed. |
| 15 | S&F powder coated aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 16 | S&F factory made steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, dovetailed or welded complete all as specified and directed. |
| 17 | S&F factory made steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, without glazing bars, dovetailed or welded complete all as specified and directed. |
| 18 | M&L framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 19 | M&L Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane 3 mm thick complete all as specified and directed. |
| 20 | S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 21 | M&L plain cement concrete Type C1, 1:3:6 ( using 20 mm graded stone aggregate) for filling of hollow pressed steel frame complete all as specified and directed. |
| 22 | S&F 25 x 3mm FI hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed. |
| 23 | M&L plain cement concrete Type B-0 1:2:4 ( using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster ( while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed. |
| 24 | S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 25 | S&F 35 mm thick second class hardwood factory made glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. without sash bars sizes of the members of the shutters as specified in SSR Part-I section 8 , clause 8.24 (a) complete all as specified and directed. |
| 26 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 27 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed. |
| 28 | S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 29 | S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 30 | S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 31 | S&F 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed. |
| 32 | S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed. |
| 33 | S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 34 | Demolition of brick work/ stone masonry/ PCC block masonry built in CM or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 35 | M&L old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in CM 1:6 etc. complete all as specified and directed. |
| 36 | M&L 10 mm thick renedering on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L 5 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete in complete all as specified and directed. |
| 38 | M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. (WPL shall be measured and paid seperately). |
| 39 | Supply only liquid water proofing compound complete all as specified and directed. |
| 40 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 41 | Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 42 | S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed. |
| 43 | S&F 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed. |
| 44 | Cutting chases, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed. |
| 45 | S&F 1000 Ltrs capacity rotational moulded polythene water storage tank ISI marks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tanks complete all as specified and directed. |
| 46 | S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 47 | S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed. |
| 48 | Demolition and breaking up 100 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in CM complete all as specified and directed. |
| 49 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed. |
| 50 | S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 75mm bore complete all as specified and directed. |
| 51 | S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 52 | S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed. |
| 53 | S&F 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 54 | S&F 110mm bore PVC vent cowl complete all as specified and directed. |
| 55 | S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed. |
| 56 | S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed. |
| 57 | S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed. |
| 58 | S&F in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed. |
| 59 | S&F PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed. |
| 60 | S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified and directed. |
| 61 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets complete all as specified and directed. |
| 62 | S&F in repairs vitreous china urinal, Half stall type white, with grating and union etc complete all as specified and directed. |
| 63 | S&F in repairs urinal spreader of brass chromium plated for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 64 | S&F in repairs push cock, CP Fancy type 15mm bore complete all as specified and directed. |
| 65 | S&F in repair 15 mm bore CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 66 | S & F in repair PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed. |
| 67 | S&F waste coupling brass CP for glazed ware sink, WHB, urinal etc with long screwed shanks and fly nuts complete of 32mm dia.etc complete all as specified and directed. |
| 68 | S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted. |
| 69 | S&F in repairs 600 mmx450 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 70 | S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 71 | S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 72 | S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed. |
| 73 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 74 | S&F 15mm bore fancy type concealed stop cock chromium plated with long shank and cup complete all as specified and directed. |
| 75 | S&F Salt glazed stone ware gully trap 150mm square type 'P' includng MS gratings suitable to 150 x 150 mm gully trap and including PCC chamber 10 cm thick and RCC cover set in CM 1:6 complete all as specified and as directed. |
| 76 | M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or grith complete all as specified and directed. |
| 77 | M&L Preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of priming complete all as specified and directed. |
| 78 | M&L preparation of newly plastered surfaces of wall and applying two coats of distmper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed. |
| 79 | M&L prepraring newly plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 80 | M&L preparation of new plastered surfaces of celling and applying two coats of white lime wash complete all as specified and directed. |
| 81 | M&L complete removal of existing treatment on wall and applying two coats of distmper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed. |
| 82 | Complete removal of existing treatment of ceiling surfaces of brick or concrete surfaces, pillars, cornices and similar surfaces at any height including necessary scaffolding and applying two coats of white wash (lime) complete all as specified and directed. |
| 83 | Complete removal of existing treatment on wall and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 84 | S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc complete all as specified and directed. |
| 85 | M&L anti-termite Treatment of soil under floors using emulsion @ one litre per hole, 300mm apart incl drilling and plugging 12 mm dia holes with CM 1:2 to match the floors complete all as specified and directed. |
| 86 | M&L anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear meter incl drilling and plugging holes etc.in apron complete all as specified and directed. |
| 87 | Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed. |
| 88 | M&L PCC 1:4:8 type D2, 75mm thick using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 89 | S&F glossy finished Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 90 | Demolition and breaking up drain pipes 150 mm (salt glazed ware or reinforced concrete) including PCC bedding & hauching set in CM complete all as specified and directed. |
| 91 | M&L 150mm dia reinforced cement concrete pipe CL NP-2 laid and jointed complete with collarscomplete all as specified and directed. |
| 92 | M&L PCC 1:3:6 type C2, 40mm graded stone aggregate as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm bore complete all as specified and directed. |
| 93 | M&L 10mm thick rendering in CM 1:4 on concrete surfaces finished even and fair without using extra complete all as specified and directed. |
| 94 | M&L mild steel TMT bars 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 95 | M&L Precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs of manholes, open drains inclusive of form work set in CM (1:4) complete all as specified and directed.Note : Reinforcement shall be measured and paid separately |
| 96 | Excavation in trenches, not exc 1.50 m depth & n. exc1.50m wide for foundation etc & getting out in soft/disintegrated rock complete all as specified and directed. |
| 97 | Returning filling including spreading, leveling watering & Well ramming in layers n.exc 25 cm thick in soft/disintegrated rock complete all as specified and directed. |
| 98 | Removing excavated material (soft/disintegrated rock) exc 250m & not exc 500m and depositing where directed at a level n. exc 1.50m above starting point complete all as specified and directed. |
| 99 | Excavation in trenches, not exc 1.50 m depth & n. exc1.50m wide for foundation etc & getting out in any type of soil complete all as specified and directed. |
| 100 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed |
| 101 | Excavating in post holes (or similar holes) in Hard/dese soil each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed |
| 102 | Excavation in trenches, not exc 1.50 m depth & not exc 1.50m wide for foundation etc & getting out in hard dense soil complete all as specified and directed. |
| 103 | M&L cement concrete (1:4:8) type D-2 (40 mm graded stone aggregate) as in mass Concrete complete all as specified and directed. |
| 104 | M&L,15mm thick rendering on fair faces of brick surfaces in CM (1:4), finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 105 | M&L for reinfoced cement concrete 1:2:4 type B1,(nominal mix)using 20mm graded stone aggregete) as in foundaion, footing, foundation beams, bases for columns etc. and mass concrete, complete all as specified and directed by engineer-in-charge. |
| 106 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete surfaces complete all as specified and directed. |
| 107 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 108 | All as per item No 107 here-in-before but 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 109 | S&F steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed by Engineer-in-Charge. |
| 110 | S&F steel Plates (plain or chequered)channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W(Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F 5 to 10 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed. |
| 112 | S&F mangalore pattern pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 113 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 114 | S&F MS steel flat iron as in wind tie for roof sheet including securing bolts complete all as specified and directed. |
| 115 | M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or grith complete all as specified and directed. |
| 116 | M&L for prepration of new surface of wall and applying two coats of white wash Complete all as spacified and directed |
| 117 | M&L for 75 mm thcik PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base finish even and fair, complete all as specified and directed. |
| 118 | M&L for 100 mm thcik PCC 1:2:4 type B2 using 40mm graded aggregate as in floor finish even and smooth without using extra cement complete all as specified and directed. |
| 119 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 120 | M&L 60 mm thick glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed. |
| 121 | M&L for PCC 1:3:6 type D2 (Using 40mm graded crushed stone aggregete) as in in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars,boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 122 | M&L for Providing precast cement concrete 1:2;4 type B-1 using 20 mm graded stone aggregate as in posts, boundary pillars bed plates, pintle blocks, ancho-rage blocks, bonders etc.(ready made) complete all as specified and directed. |
| 123 | S&F TMT bars 6mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) or securing with clips |
| 124 | All as per Item No 123 here-in-before but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 125 | M&L Preparation of New concrete surface of any description over 10cm girth or width, not otherwise described applying one coat Priming Priming over two coat Synthetic enamel compeet all as spacified and directed. |
| 126 | M&L Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high |
| 127 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed. |
| 128 | Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed. |
| 129 | M&L complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and directed for the following :- |
| 130 | One light point controlled by one switch. |
| 131 | One Ceiling fan/Exhaust fan point controlled by one switch and one regulator. |
| 132 | One 3 pin switch socket outlet point 5 Amps on independent board. |
| 133 | One 3 pin switch socket outlet point 5 Amps on same board with other switch. |
| 134 | All as per item 129.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed. |
| 135 | S&F modular type switch, one way 6 Amps , 1 module complete all as specified and directed. |
| 136 | S&F modular type switch, one way 16 Amps, 1 module complete all as specified and directed. |
| 137 | S&F modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed. |
| 138 | S&F modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed. |
| 139 | S&F ceiling rose surface backlite 65x50 mm 3 terminals complete all as specified and directed. |
| 140 | S&F Modular fan regulator step down 120 Watt, 2 module complete all as specified and directed. |
| 141 | S&F lamp holder PVC type with back plate for lamp holder fitting complete all as specified and directed. |
| 142 | S&F LED lamp suitable for B22 holder of capacity 10 Watt complete all as specified and directed. |
| 143 | S&Fixing LED lights fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder, including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 144 | M&L LED Street lighting 35W LED IP66 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 60W LED 6000K complete all as specified and directed. |
| 145 | M&L street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 25mmX3mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size including painting with one coat of aluminium paint over a coat of red oxide / primer all as directed including taking down of old unserviceable bracket complete all as specified and directed. |
| 146 | S&F sheet metal enclosure distribution board SPN 4 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs complete all as specified and directed. |
| 147 | S&F sheet metal enclosure distribution board SPN 8 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs complete all as specified and directed. |
| 148 | S&F MCB, single pole, 240 volts, 6 to 32 Amps, C curve, complete all as specified and directed. |
| 149 | S&F MCB, single pole & neutral, 240 volts, 40 to 63 Amps, complete all as specified and directed. |
| 150 | Taking down fan sealing cable end, dismantling blades and removing fan and blades complete all as specified and directed. |
| 151 | Hanging only fan (M D Sully) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 152 | M&L Painting of ceiling fans complete, in setu with snthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed. |
| 153 | M&L complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length fo drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed. |
| 154 | Supply, laying and Testing of underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 25 sq mm 2 core cable including taking down unserviceable cable complete all as specified and directed. |
| 155 | Supply, laying and Testing of underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 2 core cable including taking down unserviceable cable complete all as specified and directed. |
| 156 | Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 157 | Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed. |
| 158 | M&L unreinforced precasted concrete cable cover class LV, type 1,flat , size 250mm x 150mm x 40mm complete all as specified and directed. |
| 159 | M&L GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 50 mm dia complete all as specified and directed. |
| 160 | Schedule of credit amount of Rs 44594.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
