|
| 1 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 2 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 3 | M & L for 100 mm thick cement concrete 1:4:8, type D2, with using 40 mm graded stone aggregate as in sub base to floors etc complete all as specified and directed. |
| 4 | M&L for Machine pressed precast concrete interlocking paver block any size and shape conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed. |
| 5 | M & L for Sand filling under floors or in foundations including watering and consolidation as specified and directed. |
| 6 | M & L for Chequered cement concrete tiles 30 Cm x 30 Cm x 25 mm thick (rubber glossy finish) over and including 20 mm thick screed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete as directed and specified. |
| 7 | M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as spd and directed. |
| 8 | M&L for Finishing surface of concrete roads, pavements, by brooming etc complete all as spd and directed. |
| 9 | M&L for Forming 12mm thick Expansion joints for 150 mm thick filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as spd and directed. |
| 10 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as spd and directed. |
| 11 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade ‘A’ complete all as spd and directed. |
| 12 | Removing of broken unserviceable mirror with stand and S&F convex mirror 800mm dia made of polycarbonate material with adjustable rod including excavation in post holes of size 30cm x 30cmx 45 cm and filling with concrete 1:2:4 type B-1 and making good complete all as specified and directed. |
| 13 | M&L for marking lines, dashes, arrows, letters etc not exceeding 15 cm wide on bituminous surfaces with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per Sqm area confirming to MOST & BIS specification, not less than 2.00 mm thick of white/ golden/ yellow as approved colour/shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e cleaning of surface by removing all dust, dirt oil grease etc complete all as specified and directed. |
| 14 | S&F in repair Solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd complete all as specified and directed. |
| 15 | M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth and making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm using paving bitumen complete all as spd and directed. Please Enable Macros to View BoQ information |
