|
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc complete all as specified and directed. |
| 2 | Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M&L for 75 mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 4 | M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 5 | M&L for coloured and glossy Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment complete all as specified and directed. |
| 6 | M&L for 100 mm thick Plain Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in footpath and finishing surface of cement concrete and finishing even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L for chequered tiles of size 300x300x25mm thick, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | Demolition of brick /stone masonary built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 9 | M&L for precast cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed. |
| 10 | All as per no 9 above but expect blocks or slabs set in CM 1:6 complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of stone/ brickwork/concrete surfaces of wall and surface finished even & smooth without using extra cement complete all as specified and as directed. |
| 12 | M&L Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping/kerbs including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 13 | Demolition of reinforced cement concrete in any position and any description not otherwise specifically provided for complete all as specified and directed. |
| 14 | M & L for reinforced cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams deck slabs and in shelves etc complete all as specified and directed. |
| 15 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick complete all as specified and directed. |
| 16 | M&L for precast cement concrete in cover slabs for manhole, drain and connected works type B1, 1:2:4 using (20 mm graded stone aggregate) set in CM 1:4 including necessary form work complete all as specified and directed. |
| 17 | M&L for TMT bars 10 mm dia and over cut to length, bent to shape required including cranking and bending with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 18 | Excavation in trenches not exc 1.5 m wide and n.exc 1.5 m in depth and getting out in hard/dense soil as in foundation of manholes and drain line complete all as specified and directed. |
| 19 | Returning filling in including spreading, levelling, watering and well ramming to layers not exc 25 cm in hard/dense soil complete all as specified and directed. |
| 20 | Demolition and breaking up drain pipe 450mm dia (SGSW, AC or RCC) set in cement mortar and including PCC bedding haunching complete all as specified and directed. |
| 21 | M&L for Reinforced concrete pipes of 450mm dia class NP2 laid and jointed with collars in trenches complete all as specified and directed. |
| 22 | M&L Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 450mm dia pipe complete all as specified and directed. |
| 23 | Removing excavated materials or demolished materials exceeding 1.5Km but n.exc 5Km and depositing where directed out side MD land complete all as specified and directed. |
| 24 | Removing of mixer of sand and sawdust material including empty shell of bullets from laided over slant surface of Stop Butt by mechanically or manually up to 15 metre height and deposit /spread the material to a distance up to n. exc 50 metre complete all as specified and directed. |
| 25 | Supply only Saw dust material complete all as specified and directed. |
| 26 | Supply only Sand/M-sand material complete all as specified and directed. |
| 27 | Mixing of saw dust with sand and laid over slant surface of stop Butt by mechanically or manually upto 15 metre height complete all as specified and directed. |
| 28 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 29 | M&L for cement plaster 15mm thick in cement mortar 1:3 on fair faces of stone/ brickwork on wall finished even & smooth without using extra cement etc complete all as specified and directed. |
| 30 | M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer including applying of 1mm thick wall care putty complete all as specified and directed. |
| 31 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 33 | M&L for preparation of old painted surfaces of wall and applying one coat of oil bound distempering on wall surfaces complete all as specified and directed. |
| 34 | M&L for preparation of old decorated ceiling surface and applying one coat of white wash in ceiling complete all as specified and directed. |
| 35 | M&L for preparation of old painted wooden surface of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | M&L for preparation of old painted surfaces of any description, over 10cm in width or girth, not otherwise described on steel surface and applying one coat of synthetic enamel complete all as specified and directed. |
| 37 | M&L for preparation of newly plastered surfaces of wall and applying two coat of acrylic based exterior paint over one coat of primer on walls complete all as specified and directed. Note for ser No.28 to 37: Work shall be carried out upto 15 Metre height. Rate quoted shall deemed to be inclusive of scaffolding and other necessary arrangements upto 15 Metre height. |
| 38 | M&L for 50mm thick Plain Cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as sub base of floor complete all as specified and directed. |
| 39 | M&L for 40 mm thick Plain Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 41 | S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 42 | S&F glazed ceramic coloured tiles 450x300x7mm thick, etc. on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed. |
| 43 | S&F in repairs vitreous china wash down water closet pedestal pattern white (excluding fixing bolts, flushing cistren and flush pipe) with 'P' or 'S' trap complete all as specified and directed. |
| 44 | S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges devices complete all as specified and directed. |
| 45 | S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern white low level with ball valve float and handle including bracket complete all as specified and directed. |
| 46 | S&F in repair chromium plated telephonic health faucet shower with flexible tube of stainless steel, 1.25 Mtr long & hook, multi flow 15mm dia for iron pipe or for brass ferrule complete all as specified and directed. |
| 47 | S&F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) with CP waste coupling including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed. |
| 48 | S&F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 49 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 50 | S&F in repairs vitreous china urinal, half stall type, with all necessary fitting complete all as specified and directed. |
| 51 | S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions, fancy type, chromium plated and fixed complete all as specified and directed. |
| 52 | S&F in repair bib taps 15mm dia chromium plated fancy type long body with capstan head screwed down screwed for iron pipe or for brass ferrule all as specified and directed. |
| 53 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 54 | S&F of 2nd class soft wood 25mm thick clean sawn boarding with butt joints fixed with nails any situation (except flooring and skirting) complete all as specified and directed. |
| 55 | M&L for boarding in repairs of 25mm thick 2nd class soft wood to replace old and or decayed boarding in patches including cutting out old piecing heading joints etc complete all as specified and directed. |
| 56 | M&L inrepair clean sawn second class hardwood in scantling etc fixing in position with nails, screw or glue etc complete all as specified and directed. |
| 57 | M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and directed. Note for ser No. 53 to 57: Work shall be carried out upto 15 Metre height. Rate quoted shall deemed to be inclusive of scaffolding and other necessary arrangements upto 15 Metre height. |
| 58 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. Please Enable Macros to View BoQ information |
