|
| 1 | Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr deep for taking out/ laying of under ground cable, pole, pipe, stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath/ pavments complete all as specified and directed. |
| 2 | Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm spread any type of soil complete all as specified and directed. |
| 3 | Removing excavated materials n.exc 50 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and directed. |
| 4 | M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing water pipe line upto 110mm complete all as specified and directed. |
| 5 | Taking down old GI/ MS/ PPR pipe with fitting of 15/ 20/ 25 mm bore from surface/ trench including dismantling and removing (except serviceable pipe for refixing) materials from work site complete all as specified and directed.(Note:- Earthwork shall be measured & paid separetely) |
| 6 | All as per item No. 5.00 above but pipe of 32/ 40/ 50/63 mm bore complete all as specified and directed. |
| 7 | All as per item No. 5.00 above but pipe of 80/90/100/110/160 mm bore complete all as specified and directed. |
| 8 | Supply, laying, jointing and testing 3 layer PPR Polypropylene random copolymer concealed pipes UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PPR plain and brass threaded polypropylene random fittings laid in trenches / wall/ surface including all fittings & necessary clamps of outer dia 25mm, SDR 7.4 (PN-16) complete all as specified and directed. Note:- Earthwork shall be measured & paid separetely. |
| 9 | All as per item No. 8.00 above but pipe of 32 mm, SDR 7.4 (PN-16) complete all as specified and directed. |
| 10 | All as per item No. 8.00 above but pipe of 63 mm, SDR 11 (PN-10) complete all as specified and directed. |
| 11 | All as per item No. 8.00 above but pipe of 90 mm, SDR 11 (PN-10) complete all as specified and directed. |
| 12 | All as per item No. 8.00 above but pipe of 110 mm, SDR 11 (PN-10) complete all as specified and directed. |
| 13 | All as per item No. 8.00 above but pipe of 160 mm, SDR 11 (PN-10) complete all as specified and directed. |
| 14 | Supply, laying, jointing and testing mild steel galvanised water tubing 15 mm bore, medium grade including all GI fittings laid in trenches/ wall/ surface complete all as specified and directed. Note:- Earthwork shall be measured & paid separetely. |
| 15 | All as per item No. 14.00 above but pipe of 20 mm bore complete all as specified and directed. |
| 16 | All as per item No. 14.00 above but pipe of 25 mm bore complete all as specified and directed. |
| 17 | All as per item No. 14.00 above but pipe of 50 mm bore complete all as specified and directed. |
| 18 | All as per item No. 14.00 above but pipe of 80 mm bore complete all as specified and directed. |
| 19 | All as per item No. 14.00 above but pipe of 100 mm bore complete all as specified and directed. |
| 20 | Re-laying of old serviceable (serviceable pipe as obtained from taking down) GI pipe of 15/ 20/ 25 mm bore after cleaning but including all fittings laid in trenches/ wall/ surface complete all as specified and directed.Note:- Earthwork shall be measured & paid separetely. |
| 21 | All as per item No. 20.00 above but pipe of 32/ 40/ 50 mm bore complete all as specified and directed. |
| 22 | All as per item No. 20.00 above but GI pipe of 80/ 100 mm bore complete all as specified and directed. |
| 23 | Cutting of existing CI/ GI pipe 80 mm in position for insertion and including of new tee of size 80 mm complete all as specified and directed. |
| 24 | Cutting of existing CI/ GI pipe 100 mm in position for insertion and including of new tee of size 100 mm complete all as specified and directed. |
| 25 | M&L for repairing of 100 mm CI pipeline by filling lead joint with all jointing materials and gland packing (wherever necessary) to make joint water leak proof including burning out lead joint in position complete including necessary earth work as required complete all as specified and directed. |
| 26 | S&F for PPR Gate Valves (Brass insert) of 25 mm outer dia including taking out old unservicble valve complete all as specified and directed. |
| 27 | S&F for PPR Gate Valves (Brass insert) of 32 mm outer dia including taking out old unservicble valve complete all as specified and directed. |
| 28 | S&F for PPR Gate Valves (Brass insert) of 63 mm outer dia including taking out old unservicble valve complete all as specified and directed. |
| 29 | S&F for PPR Gate Valves (Brass insert) of 90 mm outer dia including taking out old unservicble valve complete all as specified and directed. |
| 30 | S&F in replacement of PPR wall clamp suitable for 25 Dia Pipe including making good to the disturbed surface of wall/floor and matching with existing specifications complete all as specified and directed. |
| 31 | S&F in replacement of PPR wall clamp suitable for 32 Dia Pipe including making good to the disturbed surface of wall/floor and matching with existing specifications complete all as specified and directed. |
| 32 | S&F in replacement of cast iron sluice valve of 80 mm bore, class PN 1.6, ISI marked with iron wheel head both end flanged, brass spindle any pattern with check nut complete with jointing material nut, bolt and washers etc complete all as specified and directed. |
| 33 | All as per item No. 32.00 above but valve of 100 mm bore complete all as specified and directed. |
| 34 | All as per item No. 32.00 above but valve of 150 mm bore complete all as specified and directed. |
| 35 | Supply & fixing in replacement of 20 mm bore, gun metal gate valve, yoke type, full opening with iron wheel head, screwed both ends, ISI marked complete all as specified and directed. |
| 36 | All as per item No. 35.00 above but valve of 25 mm bore complete all as specified and directed. |
| 37 | All as per item No. 35.00 above but valve of 50 mm bore complete all as specified and directed. |
| 38 | M&L for repairing of 80 mm dia sluice valve by opening for rectifying leakage, refacing, regrinding, replacement of galand packing, gasket, nut, bolt, washer, wheel and refixing in its original position after testing complete all as specified and directed. |
| 39 | M&L for repairing of 100 mm dia sluice valve by opening for rectifying leakage, refacing, regrinding, replacement of galand packing, gasket, nut, bolt, washer, wheel and refixing in its original position after testing comeplete all as specified and directed. |
| 40 | Supply & fixing in replacement of of 100 mm dia CI diaphragm valve with rubber lining , ISI marked with iron wheel head both end flanged, brass spindle any pattern with check nut complete with jointing material nut, bolt and washers etc.complete all as specified and directed. |
| 41 | S&F in replacement of of 100 mm dia CI butterfly vale gear operated wafer type, ISI marked complete with jointing material nut, bolt and washers etc complete all as specified and directed. |
| 42 | M&L for construction of valve pit chamber of internal dimension 40 x 40 x 40 cm with sub class 'B' bricks in cement mortar (1:4) and 10 mm thick plastering in cement mortar (1:4), PCC (1:4:8), type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6), type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 5 mm angle iron and 3 mm thick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, two coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/ loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete including dismantling of old complete all as specified and directed. |
| 43 | M&L for construction of valve pit chamber of internal dimension 90 x 90 x 90 cm with sub class 'B' bricks in cement mortar (1:4) and 10 mm thick plastering in cement mortar (1:4), PCC (1:4:8), type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping MS frame with 40 x 40 x 6 mm angle iron 5 mm thick MS sheet cover plate with locking arrangement, double door type opening, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/ loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete including dismantling of old all as specified and and directed. |
| 44 | M&L for Cleaning of valve pit chamber with sluice valve, pipes etc, 80 mm to 100mm dia including replacement of existing wornout/defective gland packing, nut, bolt & washer, etc with new one to make the sluice valve perfectly leak proof including marking of flow direction of inlet & outlet pipe line with necessary colour coding with one coat of synthetic enamel paint after preparation of old steel surfaces valve pit cover complete all as specified and directed. |
| 45 | M&L for mild steel bracing/ channel/ angle iron support fabricated from structural steel sections including MS Nuts, bolts and washers with necessary welding, bending cold or hot, drilling holes for bolts in any shape or size for Valve pit chamber Cover including two coats of aluminium paint over one coat of primer, marking of flow direction of inlet & outlet pipe line with necessary colour coding complete including taking down old all as specified and directed. |
| 46 | M&L for Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 47 | M&L for Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. Please Enable Macros to View BoQ information |
