|
| 1 | Excavation in trenches n-exc 1.5m wide and in depth and getting out for laying water pipe lines in soft rock all as specified in SSR Part-I and directed by Engineer-in-Charge. |
| 2 | -- Ditto--- but in hard soil |
| 3 | --- Ditto--- but in hard rock |
| 4 | Supplying,Lowering and Jointing new pipeline HDPE pipe of size 110 mm bore OD, PE-100, PN-8, mild steel with metal flanges if required on both ends conforming to IS 4984-2016 with latest amendments complete with gasket, bolt, nuts and washers to existing pipeline on ground/floor/trench, all as specified and as directed.Make :Supreme/Hallmark Aqua equipment Pvt.Ltd./Premier Irrigation ADRITEC Pvt. Ltd. or equivalent approved. |
| 5 | Coupler of 110mm |
| 6 | Bend 110mm |
| 7 | Adaptor 110mm |
| 8 | End cap 110mm |
| 9 | Tee 110mm equal |
| 10 | HDPE Reducing Tee, Size: 110mm x 63mm x 110mm |
| 11 | Supplying,Lowering and Jointing new pipeline HDPE pipe of size 200 mm bore OD, PE-100, PN-8, mild steel with metal flanges if required on both ends conforming to IS 4984-2016 with latest amendments complete with gasket, bolt, nuts and washers to existing pipeline on ground/floor/trench, all as specified and as directed.Make : Make : Supreme/Hallmark Aqua equipment Pvt.Ltd./Premier Irrigation ADRITEC Pvt. Ltd. or equivalent approved. |
| 12 | Coupler of 200mm |
| 13 | Bend 200mm |
| 14 | Adaptor 200mm |
| 15 | End cap 200mm |
| 16 | Tee 200mm equal |
| 17 | Reducer- 200mm x 160mm |
| 18 | Supplying,Lowering and Jointing new pipeline HDPE pipe of size 250 mm bore OD, PE-100, PN-8, mild steel with metal flanges if required on both ends conforming to IS 4984-2016 with latest amendments complete with gasket, bolt, nuts and washers to existing pipeline on ground/floor/trench, all as specified and as directed.Make : Make : Supreme/Hallmark Aqua equipment Pvt.Ltd./Premier Irrigation ADRITEC Pvt. Ltd. or equivalent approved. |
| 19 | Coupler of 250mm |
| 20 | Bend 250mm |
| 21 | Adaptor 250mm |
| 22 | End cap 250mm |
| 23 | Tee 250mm equal |
| 24 | Reducer- 250mm x 200mm |
| 25 | Supply and fixing Air release valve (flanged, cast iron) of 20mm dia complete all as specified and as directed. |
| 26 | Sluice Valve IS Standard 80mm |
| 27 | Sluice Valve IS Standard100mm |
| 28 | Sluice Valve IS Standard150mm |
| 29 | Sluice Valve IS Standard 200mm |
| 30 | Brickwork with subclass B bricks straight in CM 1:4 all as specified in SSR Part-I and directed by Engineer-in-Charge. |
| 31 | Rendering 15mm thick to fair faces of brickwork or concrete surfaces in CM 1:4 all as specified in SSR Part-I and directed by Engineer-in-Charge. |
| 32 | Returning and filling in excavated trenches with hard soil all as specified in SSR Part-I and directed by Engineer-in-Charge. |
| 33 | Removing excavated material to a distance n-exc 250m all as specified in SSR Part-I and directed by Engineer-in-Charge. |
| 34 | Taking up of any type of water mains including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead, etc. all dimensions as specified by Engineer-in-Charge. |
| 35 | Mechanical Joint for existing DI Pipe of size 80mm |
| 36 | Mechanical Joint for existing DI Pipe of size 100mm |
| 37 | Mechanical Joint for existing DI Pipe of size 150mm |
| 38 | Mechanical Joint for existing DI Pipe of size 200mm Please Enable Macros to View BoQ information |
