|
| 1 | M & L for applying a tack coat of paving bitumen VG-10 @ 5Kg/10 Sqm of road surface complete all as specified and directed. |
| 2 | M & L Premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 50mm or less) with paving bitumen VG-30 complete all as specified and directed. |
| 3 | M& L for Preparing old existing black top surfaces by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt and loose material applying evenly a tack coat with paving bitumen VG-10 @ 5kg/10 sqm of road surface, laying Semi dense bituminous premix asphaltic concrete 30mm thick consolidted thickness with 5.5% binder content of bitumen VG-30 by weight of total mix laid using mechanical paver, and rolled to a uniform smooth surface with 8 to 10 ton power road roller to required camber and gradient, complete all as Specified and directed. |
| 4 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as Specified and directed. |
| 5 | Material & Labour for preparing bituminous surfaces of road and marking 1.0 mm thick centre line /stop lines /dashes, arrows etc. and the like n exc 10cm width on road pavements with hot thermoplastic road marking paint of approved colour conforming to BS-3262-1989 with special applicator machine all as per manufactures instruction complete all as specified and directed. |
| 6 | Dismantiling of machine pressed precast concrete interlocking paver block of any shape, any size and laid dry or laid dry and pointed in any mortar complete all as specified and directed. |
| 7 | Laying of machine pressed precast interlocking paver block of any shape, any size (except tiles) with sand cushioning at same or other location with proper slope complete all as specified and directed. (Note :- Old sand to be used after screening & cleaning). |
| 8 | M & L for 75mm thick cement concrete tyepe D-2, 1:4:8 using 40mm graded stone aggregate as in subbase complete all as specified and directed. |
| 9 | M & L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 10 | M & L for machine pressed precast concrete interlocking paver block coloured rubber moulded, lacuered finish any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed. |
| 11 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 12 | M& L for cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in copings, kerbs and like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 13 | M & L for taking down & refixing of Precast cement concrete kerbs stone block of size of each kerb stone exc 0.009 Cum and n exc .020 Cum in road kerbs or mud stops, rounded or chamfered on edges, kneelers, apex stones, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating incl fixing in cement mortar 1:4 complete all as specified and directed. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
