|
| 1 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 2 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 3 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified. |
| 4 | M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete. |
| 5 | S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. |
| 6 | Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm. |
| 7 | All as per item No.06 above but bore of pipe 20mm |
| 8 | M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm |
| 9 | All as per item No.-08 above but bore of pipe 20mm |
| 10 | Refixing old steel tubing and connections in new or old position (wall, ceiling, floor etc) 15mm bore |
| 11 | All as per item No. 10 above but bore of pipe 20 mm |
| 12 | M&L Supplying and laying of 16 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified |
| 13 | M&L Supplying and laying of 20 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified |
| 14 | S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe. |
| 15 | S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe. |
| 16 | Supply only in repair 15mm PTMT Bib tap standard of any colour with butterfly handle screwed, for iron pipe and fixed complete all as specified and directed. (Make: Prayag/Cera/Shakti) |
| 17 | S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 18 | S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm |
| 19 | S & F in repairs pillar taps fancy type, chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe. |
| 20 | S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified. |
| 21 | S&F in repair Grating round 140 mm size of PTMT (Minimum weight 50gms.) |
| 22 | S&F in repairs stainless steel plate racks of size 31\\" x 36\\" x 10\\" (or nearest size) conforming to cat part No. SSKPR-315 of Silver Shine or of equivalent model in other makes specified in Appendix 'C' complete all as specified & directed. |
| 23 | S&F in repairs stainless steel plate racks of size 36\\" x 36\\" x 10\\" (or nearest size) conforming to cat part No. SSKPR-317 of Silver Shine or of equivalent model in other makes specified in Appendix 'C' complete all as specified & directed. |
| 24 | Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed. |
| 25 | M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 26 | M&L for vitrified coloured tiles 8 to 10 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed. |
| 27 | All as per item No 26 above but on skirting over 8 to 10 mm th rendering in CM 1:4 complete all as specified and directed. |
| 28 | M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 29 | Dismantling / taking down AC waste/vent pipes fixed to walls with all fittings/ accessories 100 mm dia pipes. |
| 30 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm. |
| 31 | S&F.110 mm dia PVC (SWR) bends, any radius with access door |
| 32 | S&F 110 mm dia PVC (SWR) branch piece (Single Y) equal or unequal. |
| 33 | S&F 110 mm dia PVC (SWR) branch piece double, (Single Y) equal or unequal. |
| 34 | S&F 110 mm dia PVC (SWR) vent cowl |
| 35 | S&F in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cup board shutters, partitions, shelves and similar work. Complete all as specified and directed. |
| 36 | S&F External teak wood lipping 6 mm thick for 12 mm thick particles board, block board or veneered particle board fixed with nails. complete all as specified and directed. |
| 37 | S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 38 | Dismantling of PVC water tank of capacity exc 500 litre and n. exc 1000 litre and complete all as specified and directed. |
| 39 | Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed. |
| 40 | S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes. |
| 41 | All as per item No. 40 above but 1000 litres. |
| 42 | M&L for water proofing treatment to sunken slab ,wall etc. and shall be carried out as specified below and as directed:- (a) Demolition of cement concrete/brick bats filled on sunken slab up to mother slab including removing and clean the sunken portion of toilet / Baths/WCs/ Kitchen throughly to remove laitance ,dirt,dust etc. (b). Brushing cemnt slurry with 1.2 kg of cement per Sqm duly blended with & including water proofing compound. (c). 15 mm thick (Average thickness) plaster in cement mortar (1:4)mixed with water proofing compound on sunken surfaces including wall. the corner of sunken portion shall be rounded in concave shape and adeqquate slope be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 hours by ponding. (d). Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg /Sqm and minimum 3 mm thick reinforced with polyster non- woven febric(weight not less than 3.6 kg/Sqm. (e). M&L for PCC 1:7:12 type F2 using brick course aggregates for filling of sunken portion after conceling all membrane upto FFL and sealing all joints to the entire setisfaction of Engr-in-Charge. (Note:-Floor area shall be considered for measurement & payment purpose). |
| 43 | M&L for rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement over roof slabs with admixture of integral water proofing compound @ 3% by weight of cement (WPC shall be measured & paid seperately) |
| 44 | Supply only integral water proofing compound |
| 45 | M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat as reinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area |
| 46 | Disconnecting existing PVC water tanks of capacity exc. 250 Ltr but . Exc. 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed. |
| 47 | Fixing only water tanks of capacity exc. 250 Ltr but . Exc. 500 litres incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes. |
| 48 | Disconnecting existing PVC water tanks of capacity exc. 500 Ltr but . Exc. 1000 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed. |
| 49 | Fixing only water tanks of capacity exc. 500 Ltr but . Exc. 1000 litres incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes. |
| 50 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr , etc. |
| 51 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltr , etc. |
| 52 | S & F in repair for aluminium powder coated partition using 'Jindal' aluminium SP/DP section or equivelent make as specified with 5mm thick tinted glass, PVC rubber beading, 12mm thick prelaminated partical board fixed with glazing clips etc complete all as specified and as directed, section SP (single partition) -20033, DP (double Partition)- 20034, glazing clips -4407 |
| 53 | Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified. |
| 54 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified |
| 55 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified. |
| 56 | M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. |
| 57 | M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls over a coat of primer complete all as specified. |
| 58 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified |
| 59 | M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified |
| 60 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge. |
| 61 | S& f in repair vitreous china urinal ,Half stall type ( back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing Urinal to plug with and including 60 mm long brass screw ,pointing around urinal back in cement including urinal spreaderof PTMT any colour for fixing with 15 mm dia pipe,pvc conection 15mm x 600 mm long ,waste coupling of PTMT (Half or full threaded) 40 mm dia complete all as specified and directed by Engr-in-Charge. |
| 62 | Supply only in repair water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed. |
| 63 | Supply only in repair PVC seat cover for EWC of white colour complete all as specified and directed. |
| 64 | Supply only in repair 15 mm Brass CP Wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 65 | Supply only in repair 32mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 66 | All as per item No. 65 here- in- before but 50mm dia. |
| 67 | Supply only in repair Grating doom 125mm dia of stainless steel with hole/without hole complete all as specified and directed. |
| 68 | Supply only in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge |
| 69 | Supply only in repair soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 70 | Supply only GI nipple, and socket 15mm bore size complete all as specified and directed. |
| 71 | Supply only GI nipple, and socket 20mm bore size complete all as specified and directed. |
| 72 | Supply only GI Elbow, and Tee 15mm bore size complete all as specified and directed. |
| 73 | Supply only GI Elbow, and Tee 20mm bore size complete all as specified and directed. |
| 74 | Supply only Socket reducer, and Tank connection 20mm bore size complete all as specified and directed. |
| 75 | Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 76 | All as per item No- 75 here- in- before but 600mm long. |
| 77 | S & F in repair 600xmmx450mm bevelled edge mirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-Charge. |
| 78 | Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store. |
| 79 | All as per item No 78, but n'exc 1.5 Sqm each. |
| 80 | Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed. |
| 81 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing and directed by Engr-in-charge. |
| 82 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 83 | S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides |
| 84 | S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. |
| 85 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125X 60mm. |
| 86 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. |
| 87 | Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts oringins measured from the face of the jamb into wall exc half brick but no exc one brick. Please Enable Macros to View BoQ information |
| 88 | Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts oringins measured from the face of the jamb into wall exc half brick but no exc one brick. Please Enable Macros to View BoQ information |
