|
| 1 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and as directed by Engineer-in-Charge |
| 2 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engineer-in-Charge |
| 3 | S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed. |
| 4 | All as per item No. 3 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed. |
| 5 | Dismantling timber scantling in fillets,rafters,purlins etc. under 40 sqcm in section unframed work complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and as directed by Engineer-in-Charge. |
| 8 | S&F rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A complete all as specified and as directed. |
| 9 | S&F roof trusses (framed),trussed,purlin,crane gantries,rails and fastening and heavy brackets framing (beam,tee,angles,channel or flat section including distances cleats etc conforming to Fe 410-W(Gde-E-250) complete all as specified and as directed by Engineer-in-Charge by Engr-in-charge. |
| 10 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed by Engineer-in-Charge |
| 12 | S&F Aluminium anodised snap grid false ceiling, for insulation and acoustic purpose, using standard aluminium sections of size 35.60 mm x 23.60 mm x 1.60 mm as in wall angle, 23.60 mm x 23.60 mm x 1.60 mm as in Main/ Cross Tees and 26.00 mm x 26.00 mm x 1.60 mm angles for grid of size 605 x 605mm suspended with 4mm dia. GI wire at intervals n.exc. 600mm centre to centre and fixed to roof truss with suitable size MS hooks and fastening bolts etc. from sloping/flat roof including 12 mm thick Gypsum ceiling boards of size 600mm x 600mm fixed with clips to aluminium snap grid including preparation of exposed surfaces of ceiling boards and applying two coats of acrylic emulsion distemper over a coat of primer incl putty all as specified and as directed. |
| 13 | M & L for taking out old water proofing treatment to RCC roof slab incl plaster of any th. and application as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm over 10mm th rendering CM 1 :3 with wpc and manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application method and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note:-Obtain material through out low laying Area |
| 14 | Disconnecting existing PVC water storage tanks of capacity exc 250 ltrs & n exc 500 ltrs, setting aside (or lowering if required) for laying of APP memberane or repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and directed. |
| 15 | Disconnecting existing PVC water storage tanks of capacity exc 500 ltrs & n exc 1000 ltrs, setting aside (or lowering if required) for laying of APP memberane or repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and directed. |
| 16 | Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed. |
| 17 | Supply only Liquid water proofing compound . |
| 18 | Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed. |
| 19 | Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed. |
| 20 | Fixing only 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 21 | Fixing only 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 22 | M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 23 | M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 24 | S & F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. |
| 25 | S & F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. |
| 26 | Demolition of brick work/stone boulder masonry built in cement mortar in any position complete all as specified and as directed by Engineer-in-Charge. |
| 27 | M & L for brick work with sub class \\"B\\" brick straight or curved on plan exceeding 6 mtr mean radius and built in cm 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 29 | M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 30 | M & L for Rendering 05 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 shall be even and smooth without using extra cement complete all as specified and as directed. |
| 31 | M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement incl WPC complete all as specified and as directed. |
| 32 | M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls on plastered surfaces complete including 2mm thick wall care putty and one coat of primer complete all as specified and as directed. |
| 33 | M&L for preparation of newly plastered surfaces of ceiling and applying two coat of OBD incl 2 mm putty and one coat of primer complete all as specified and as directed. |
| 34 | M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls on plastered surfaces complete. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 36 | M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete. |
| 37 | M&L for vitrified coloured tiles 8 to 10mm thick Light shade (square/rectangular) polished area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed. |
| 38 | All as per item No 37 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed. |
| 39 | M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced. |
| 40 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and pointed in cement mortar complete all as specified and as directed. |
| 41 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) (Vertical/horizontal complete) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified. |
| 42 | M&L for providing edge to moulding to 18-20mm thick marble stone any description including machine polishing to edge to give high gloss finish ect complete all as specified and as directed by Engineer-in-Charge |
| 43 | M&L for 18-20 mm thick Granite (of any type) machine cut bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed in CM 1:4 complete all as specified and directed. |
| 44 | M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and backing coat 10mm th CM 1:4 complete complete all as specified and directed. |
| 45 | Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 46 | M/L for hardcore of basalt/trap broken stone gauge exc 63 mm but n.exc 100 mm size, deposited, spreading and levelled in layers and watered and rolled, rammed to true surfaces all as specified and directed by Engineer-in-Charge |
| 47 | M & L for 75 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 48 | M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 30 mm thick sand cushion complete all as specified and as directed. |
| 49 | M & L for precast cement concrete kerb stone block C1 1:3:6 (20mm graded agg) of any section and size as per reqmt with plain fair faces, setting in CM (1:4) , complete all as directed by Engr in Charg. |
| 50 | M & L for Chequered cement concrete tiles rubber moulded of 30 cm x 30cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed. |
| 51 | M&L PCC (20 mm graded aggregate)1:3:6 Type C1 Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges |
| 52 | M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed. |
| 53 | Demolition of cement concrete (unreinforced) in Suken portion exe 15 cm thickness (below or aboveground level) complete all as specified and directed. |
| 54 | Providing and carrying out water proofing treatment to toilet, sunken slabs, wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer's specification paint complete all as specified and directed. |
| 55 | M & L cement conrete 1:7:12 type F2 (uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed. |
| 56 | S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed. |
| 57 | S & F 600xmmx450mm bevelled edge mirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 58 | S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 59 | S&F Brass chromium plated bottle traps 32 mm bore dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as directed. |
| 60 | S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 61 | S&F in repairs plastic water closet seat cover, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce. |
| 62 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified |
| 63 | S&F in repairs Grating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed. |
| 64 | S&F in repairs vitreous china squating pan Orissa pattern of size 580x440 mm white with integral foot rest any pattern complete all as specified and directed. |
| 65 | Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed. |
| 66 | S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified and directed.Make Nirali/Silver shine/Jindal |
| 67 | S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed. |
| 68 | S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed. |
| 69 | S&F in repairs 15 mm dia bib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed. |
| 70 | S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. |
| 71 | S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge |
| 72 | S&F 20mm nominal size brass float valve, high pressure, with polythene float and flynut, screwed for iron pipe and fixed complete all as specified |
| 73 | M&L for damp stop (Berger/Birla/Asian paints/equivant) of 3mm thick on wall surface by using \\"Roller\\" after smoothning the surface using sand paper etc. complete all as specified and as directed.{Note: (a) Cracks of wall to be filled with its crack fill paste make berger or equivalent, (b) Damp proof should be done by skilled labour and as per manufacturer's instruction} |
| 74 | M&L in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 75 | M&L in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 76 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 77 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 78 | S&F PVC SWR Nahani/floor trap plain with grating including jointing with solvent cement, dia of outlet 75mm, water seal minimum 75mm, complete all as specified Please Enable Macros to View BoQ information |
