|
| 1 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified |
| 2 | M & L Pre-cast cement concrete 1:3:6, type C1 (20 mm graded stone aggregate) as in block masonary with solid blocks, exc 10 cm in width and setting in cement mortar 1:4 complete. |
| 3 | Demolition of cement concrete (Un-Reinforcement) in ground floor & paving n.exc 15 cm thick etc.,complete all as specified. |
| 4 | M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified |
| 5 | M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified. |
| 6 | M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block (glossy finish) any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 50mm thick sand layer watering and ramming all as specified. |
| 7 | M& L Chequered Cement Concrete Tiles (glossy finish ) 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 8 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified. |
| 9 | M&L for machine cut kota stone slab flooring 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting over 15 mm th screed bed in CM 1:6 complete all as specified and as directed. |
| 10 | Dismantling floor, hearth or wall tiling marble etc including cement mortar bedding and not backing including removing serviceable tiles to stores and rubbish off the premises. |
| 11 | M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) as in Sub base for leveling course complete all as specified. |
| 12 | M&L for Non-skid coloured Ceramic tiles of 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 13 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 14 | All as per item No 13 but on skirtings incl 10 mm thk backing coat in CM (1:4) complete. |
| 15 | M&L for vitrified coloured tiles 8 mm to 10 mm thick (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete |
| 16 | All as per item No 15 but on skirting over 10 mm th rendering in CM 1:4 complete. |
| 17 | M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced. |
| 18 | Dismantling wrought iron or MS works of any description not otherwise provided for complete all as specified. |
| 19 | Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed. |
| 20 | S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 21 | All as per item No. 20 above but fix in valley gutter / ridge/ view cutter,plain/corrugated. |
| 22 | S&F Rolled Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) |
| 23 | S&F Roof truss framed trussed etc incl distance piece , cleats with necessery welding works etc Fe 410-W ( gde E-250)Quality A |
| 24 | S & F in repairs Pulley Operated Cloths Drying system of 7 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24\\" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Engr-in-charge. |
| 25 | S & F in repairs Pulley Operated Cloths Drying system of 8 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24\\" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / wall as specified and directed by Enge-in-charge. |
| 26 | Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid. |
| 27 | S & F for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet on wall/ ceiling fixing at site with PVC frame as per specifications and directed by Engr - in - Charge |
| 28 | S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification |
| 29 | S & F Anodised Aluminium Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified |
| 30 | M &L for two coat of synthetic enamel paint over a coat of red oxide primer on new steel surface including preparation of steel Surfaces of any description, over 10cm in width or girth,not otherwise described |
| 31 | Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified. |
| 32 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified |
| 33 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified |
| 34 | M&L for Preparation of new plastered surfaces by applying two coats of cement base paint over a coat of alkali resistant cement based priming paint complete all as specified and directed |
| 35 | M&L for Preparing surfaces newly plastered or unplastered distempering walls with two coats of distemper oil emulsion, over a coat alkali resistant priming paint complete all as specified and directed |
| 36 | M&L for taking out old water proofing treatment using polymerised membrane to roof slab. Water proofing treatment shall be as under:-(a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned to remove all foreign materials & dust to receive primer. (b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction.Note :- Obtain material through out low laying area. |
| 37 | M&L for water proofing treatment to sunken slab ,wall etc. and shall be carried out as specified below and as directed:- (a) Demolition of cement concrete/brick bats filled on sunken slab up to mother slab including removing and clean the sunken portion of toilet / Baths/WCs/ Kitchen throughly to remove laitance ,dirt,dust etc. (b). Brushing cemnt slurry with 1.2 kg of cement per Sqm duly blended with & including water proofing compound. (c). 15 mm thick (Average thickness) plaster in cement mortar (1:4)mixed with water proofing compound on sunken surfaces including wall. the corner of sunken portion shall be rounded in concave shape and adeqquate slope be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 hours by ponding. (d). Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg /Sqm and minimum 3 mm thick reinforced with polyster non- woven febric(weight not less than 3.6 kg/Sqm. (e). M&L for PCC 1:7:12 type F2 using brick course aggregates for filling of sunken portion after conceling all membrane upto FFL and sealing all joints to the entire setisfaction of Engr-in-Charge. (Note:-Floor area shall be considered for measurement & payment purpose). |
| 38 | Disconnecting existing tanks, exc any size setting aside capacity exc 500 ltr to n exc 1000 ltr (or lowering if required), cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position. |
| 39 | S&F 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed. |
| 40 | S&F 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed. |
| 41 | S& F in repairs Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore. |
| 42 | Supply only 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and directed. Specification of flushing cistern shall be as per IS 7231-1994. |
| 43 | Supply only' flushing cistern kit' for complete set to fitted inside as per reqd for cistern functional complete all as specified and directed. |
| 44 | S & F in repairs Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs.Note:wash basin shall conform to IS 2556(part-4)-2004. |
| 45 | M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres PVC automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union , union and cap and discharge pipe; fixed in repairs. |
| 46 | S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs . |
| 47 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat cover, flush pipe, flushing cistern incl all joints complete |
| 48 | M&L for PVC (SWR) floor trap(75 mm dia), plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of Engr-in-charge. |
| 49 | Supply only 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed |
| 50 | Supply only soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed. |
| 51 | Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed. |
| 52 | Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed. |
| 53 | S & F 15 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 54 | S & F 20 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 55 | Supply only GI nipple, and socket 15mm bore size complete all as specified and directed. |
| 56 | Supply only GI nipple, and socket 20mm bore size complete all as specified and directed. |
| 57 | Supply only GI Elbow, and Tee 15mm bore size complete all as specified and directed. |
| 58 | Supply only GI Elbow, and Tee 20mm bore size complete all as specified and directed. |
| 59 | Supply only Socket reducer, and Tank connection 20mm bore size complete all as specified and directed. |
| 60 | Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 61 | All as per item No. 60 here- in- before but 600mm long. |
| 62 | M&L for complete removal of existing treatment of surface finish on wall (any number of layers) by scraping with steel scrappers or any other means including depressions of scrapper with wall care putty (1 mm thick) and applying one coat of primer with two coat of oil bound distemper complete all as specified and directed. |
| 63 | M&L for complete removal of existing treatment from old surfaces finished on wall preparation of surfaces priming with alkali resistant priming and apply two coat of cement based paint complete all as specified and directed. |
| 64 | Preparation old plastered surfaces of ceiling and applying One coat Oil Bound Distemper complete all as specified and directed |
| 65 | Dismantling of cast iron or reinforced concrete/ PVC pipes (any dia of pipe), jointed in cement mortar and taking out of trenches, if required complete all as specified and directe |
| 66 | M&L for 75 mm dia PVC (SWR) pipes Single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directe |
| 67 | All as per Srl item No. 66.00 above but fixed to walls |
| 68 | All as per Srl item No. 66.00 above but 110 mm dia fixed to walls |
| 69 | M&L for 75 mm dia PVC (SWR) bends any radius complete all as specified and directed |
| 70 | All as per Srl item No.69.00 above but 110 mm dia |
| 71 | M&L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 72 | M&L for 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed |
| 73 | S&F for sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 74 | Supply only Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge |
| 75 | M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres PVC automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union , union and cap and discharge pipe; fixed in repairs. |
| 76 | S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs . |
| 77 | Supply only in repair door closer hydrau lically regulated,designation No.1universal type,, Aluminium body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed. |
| 78 | Supply only in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 79 | S & F in repair Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 80 | Supply only in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 81 | Supply only in repairs stainless steel curtain rod 25 mm dia complete with bracket and side knobs all as specified and directed. |
| 82 | Supply only in repairs floor door stopper, with 150 mm long of Aluminium body and tounge with hard drawn steel spring in floor |
| 83 | Supply only in repair Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm including necessary beadings and fillets complete all as specified and directed. |
| 84 | Supply only in repair 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty and hacking out broken glass complete all as specified and directed. |
| 85 | Supply only in repair 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. |
| 86 | Supply only in repair 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 87 | Supply only in repaiur 150mm aluminium alloy handle, cast type, anodised |
| 88 | Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed |
| 89 | Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each. |
| 90 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed |
| 91 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm |
| 92 | M/L for PCC 1:2:4 type B1 (using 20 mm graded aggregate ) in door frame filling all as specified and directed. |
| 93 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. The door frame shall be tied to wall using 75/100mm long screw as directed |
| 94 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 95 | S&F 30mm mm thick flush shutters, solid core construction, with block board core and plywood face panels.all as per spd complete all as specified and as directed. |
| 96 | S & F Glazed skeleton shutter 30mm thk IInd class HW open rebated and prepared to receive glass, gauze etc (without shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc ; size of members of shutters as specified in SSR Pt-I, section 8 clause 8.24 (a) |
| 97 | S&F 2nd class hard wood30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all a specified and directed. |
| 98 | S & F galvanised mild steel wore cloth, 0.63mm nominal dia of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 99 | M & L for Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth ,including roof and applying one coat synthetic enamel of approved tint by Engr-in-charge synthetic enamel paint complete all as specified. Please Enable Macros to View BoQ information |
| 100 | M & L for Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth ,including roof and applying one coat synthetic enamel of approved tint by Engr-in-charge synthetic enamel paint complete all as specified. Please Enable Macros to View BoQ information |
