|
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15cm thick above or below ground level complete all as specified and as directed. |
| 2 | Demolition of brick / block /stone masonry built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed. |
| 3 | Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and as directed. |
| 4 | Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed. |
| 5 | Taking down cement plaster on walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 6 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 7 | Dismantling of CGI/PGI /PVC translucent sheets of any guage or any thickness/size all as specified and as directed. |
| 8 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth for foundation etc and getting out in hard/ dense soil all as specified and as directed. |
| 9 | Earth work in excavation over areas n exc 1.5 m depth by mechanical means (Hydraulic excavator) in all kind of soil including getting out and disposal of excavated earth lead upto 50 m and all as specified and as directed. |
| 10 | Returning, filling in soil, including spreading, levelling watering & well ramming in layers not exc 25 cm thick complete all as specified and as directed. |
| 11 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed. |
| 12 | M&L for hardcore of broken stone or boulders, guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed. |
| 13 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc. all as specified and as directed. |
| 14 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as in sub-base, complete all as specified and as directed. |
| 15 | M&L for chequered cement concrete tiles, glossy finish, rubberized of size 25cm x 25cm x 25mm / 30cm x 30cmx25 mm thick as in floors, set jointed and pointed in neat cement slurry with grey cement and pigments over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified & as directed. |
| 16 | M&L for 60mm thick factory made chamfered edge, cement concrete paver blocks of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed |
| 17 | M&L for 80mm thick factory made chamfered edge, cement concrete paver blocks of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed |
| 18 | M&L at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 19 | M&L for PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) as in coping , cills, plinth courses, string courses, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed complete all as specified and as directed. |
| 20 | M&L for 100 mm thick, cement concrete 1:2:4, type B2 (using 40 mm graded stone aggregates) as in path/hard standing and flooring, laid in alternate bays, with construction and dummy joints, finished even & smooth without using extra cement including necessary formwork complete all as specified and as directed. |
| 21 | M&L for 18 to 20mm thick machine cut granite slabs bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 20mm thick screed bed in Cement Mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note: Shade of granite shall be as approved by GE. |
| 22 | M&L for 45 to 50 mm thick precast RCC (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as in wall panels for compound wall including interlocking arragements in precast RCC columns and adjacent wall panels as per approved design/patterns, set in cement mortar 1:4, (measured solid) including all mouldings but excluding frame (columns) complete all as specified and as directed.Note: (i) The cost of reinforcement and form work shall deemed to be included in the unit rate quoted.(ii) Columns/ posts shall be measured and paid seperately under respective items. |
| 23 | M&L for precast prestressed RCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in columns, posts, boundary pillars with and including grooves to locking of precast RCC wall panels, set in cement mortar 1:4 complete all as specified and as directed.Note: The cost of reinforcement and form work shall deemed to be included in the unit rate quoted. |
| 24 | M&L for precast cement concrete block masonry with solid block of PCC (1:5:8) exc 10 cm in width and setting in cement mortar (1:6) including demolition of existing block work built in cement of any description complete all as specified and as directed. |
| 25 | M&L for brickwork with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed. |
| 26 | M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including dismantling of existing stone masonry complete all as specified and as directed. |
| 27 | M&L for flush pointing to random rubble masonry, uncoursed or brought to course in cement mortar 1:4, including racking out joints etc. complete all as specified and as directed. |
| 28 | M&L for PCC 1:3:6, type C1 (Using 20mm graded stone aggregates) as in surfaces channels and drains including necessary forms / moulds complete all as specified and as directed. |
| 29 | Extra for forming fair finished surfaces of cement concrete drain or channel, 30 cm inner girth, using extra cement including forms, moulds mitred/ stopped ends etc. complete all as specified and as directed. |
| 30 | Add to or deduct from item No 29 above for each 25mm inner girth or part thereof over or under 30cm girth, for forming fair finished surfaces of cement concrete drain or channel, using extra cement including forms, moulds mitred/ stopped ends etc. complete all as specified and as directed. |
| 31 | M&L for 50mm thick U shaped precast RCC drain smooth finished, with internal size 300x300mm and outer size 400mmx370mm laid over and including 3mm thick cement paste over and including 100 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed. Note: The cost of reinforcement and form work shall deemed to be included in the unit rate quoted. |
| 32 | M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) drain cover of required size, set in CM 1:4, complete all as specified and directed by Engr-in-Charge. Notes : (i) Size and shape shall be all as directed by Engr-in-Charge.(ii) The cost of reinforcement and form work shall be deemed to be included in the unit rate quoted. |
| 33 | M&L for RCC hume pipe 300 mm dia, class NP-2, laid as drain pipe in culvert etc, jointed in cement mortar with collars complete including taking down old pipe all as specified and as directed. |
| 34 | M&L for RCC hume pipe, 450 mm dia, class NP-2, laid as drain pipe in culvert etc, jointed in cement mortar with collars complete including taking down old pipe all as specified and as directed. |
| 35 | S &F for precast Factory made M-25 Grade Cover slab load bearing capacity 2.5 T to 3.5 T (size 40 x 60 Cm) thickness 75 mm as in Drain cover including suitable lifting hooks with plain faces including necessary form work, Joints filling with in CM 1:4 complete all as specified and directed.Note : Contractor shall produce manufacturer's test certificate for each lot procured. |
| 36 | M&L Cleaning and desluging of drains of C/S not exceeding 0.50 sqm and avg depth of debris/sludge not exceeding 450 mm including removing out all debris/earth/building materials/rubbish and bushes from the drain for smooth functining and disposal of debris out of defence land complete all as specified and directed by Engr-in-charge. |
| 37 | S&F 2mm thick PVC translucent sheets UV Resistant, of light weight, washable fixing to gate /Grills all as specified and as directed by Engr-in-charge.Note:- colour as approved by GE /Engr-in-Charge. |
| 38 | M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in slab supported on walls ,culverts ,beams and column, in floor ,roof landing, deck slab, shelves and the like etc complete all as specified and as directed.Note : Cost of reinforcement shall be measured and paid seperately. |
| 39 | Use and waste of form work to slabs and similar work for rough finished surfaces of concrete not exc 200 mm thick complete all as specified and as directed. |
| 40 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed. |
| 41 | M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed. |
| 42 | M&L for rendering 15 mm thick on other than fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed. |
| 43 | S&F mild steel framed work as in doors or gates of angle/hollow section or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conforming to Fe-410-W (Gde E-250) quality B all as specified and as directed. Note : Disturbed surfaces of wall shall be made good to match with the existing surfaces. |
| 44 | S&F mild steel framed work as in stairs (framed) and landing, gratings, handrails, brackets etc of angle/hollow section or other section with gusset plates, rails, braces etc complete drilled for fixing fittings necessary rivetting/welding cutting up complete steel conforming to Fe-410-W (Gde E-250) all as specified and as directed. Note : Disturbed surfaces of wall shall be made good to match with the existing surfaces. |
| 45 | M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over a coat alkali resistant primer all as specified and as directed. |
| 46 | M&L for preparation of old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and as directed. |
| 47 | M&L for preparation of old treated steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 48 | M&L for preparation of new steel and iron surfaces of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 49 | S&F in repairs 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber ring joint, laid in trenches or in floors or in masonry as in spouts, weep holes etc complete all as specified and as directed. |
| 50 | S&F in repairs, 110 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed |
| 51 | M&L for preparing of old surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc including filling cracks using acrylic wall crack filler and applying two coats of exterior acrylic emulsion paint alkali & fungal resistance, dirt resistance of required shade in any colour complete all as specified and as directed.Note :- Work shall be carried out upto tripple storey height, hence rates quoted shall be deemed to include this aspect and cost of scafolding and safety precautions etc required. |
| 52 | M&L for machine cut Kota stone flooring 18 to 22 mm thick ( size of kota stone slab 22\\"x22\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 53 | All as per item No 52.00 here in before but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick in cement mortar 1:3 all as specified and as directed. Note: Risers provided to steps shall be in one piece. |
| 54 | M&L for machine cut Kota stone slabs 18 to 22 mm thick as in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed. |
| 55 | Fixing only cement concrete paver blocks as in footpath, parks, lawns, drive ways or light traffic parking etc., over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.Note: Old cement concrete paver blocks of any type and size retrieved from dismantling shall be reused under this item. |
| 56 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing rubbish off premises etc complete all as specified and directed. |
| 57 | M&L for 18-20mm thick prepolished Granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/plateform, gate pillars, cills etc or on vertical surfaces including vertical projections, including full round mouldings the edges laid over and over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture of pigments to match the shade of granite and rubbing polishing to achieve mirror finish complete all as specified & directed. Note:- Colour/shade to be decided by Engineer-in-Charge / GE. Please Enable Macros to View BoQ information |
