|
| 1 | M&L for dismantling and taking out old ceiling fan of size 1200/1400 mm sweep fan burnt out motor any type any sweep and including cutting, cleaning of slots winding of fan motor after re-winding the same fan motor assembly with replacing by new super enameled copper winding wire as per existing wire turn ratio and all as per existing wire gauge/size and also providing of sleeve work, with E class insulation varnish, threading and also replacing of all PVC/MS defected minor parts of fan system complete and making electric wiring connection complete and refixing the fan complete all as specified and directed. |
| 2 | Description all as per serial item No. 2 here-in-before, but exhaust fans motor of size 250 mm to 300 mm sweep, complete all as specified as directed. |
| 3 | Description all as per serial item No. 2 here-in-befor, but exhaust fans motor of size 400 mm to 600 mm sweep, complete all as specified as directed. |
| 4 | Description all as per serial item No. 2 here-in-befor, but exhaust fans motor of size 300 mm to 400 mm sweep, complete all as specified as directed. |
| 5 | Description all as per serial item No. 2 here-in-befor, but exhaust fans motor of size 100 mm to 200 mm sweep, complete all as specified as directed. |
| 6 | M&L for taking down of old unserviceable air circulation ventilation fan of size 250 MM sweep single phase 220 Volt AC and replacement with by all new one of body and it all connected fixing accessories of system like outer body frame cover including back and face cover with holding support channel made out of high quality PVC body framing work along with louvers, and shutter, fan motor assembly with shaft and blade and it all connected fixing accessories of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut ,bolt etc complete including providing of suitable type flat flexible cable and making electric connection and old item deposited to store , complete all as specified and directed. |
| 7 | M&L for taking down of old unserviceable ceiling fan of size 1400 mm sweep single phase 220 Volt AC and replacement with by all new one of body frame parts and it all connected fixing accessories of system like fan motor with shaft & rotar assembly ball bearing, in side 'O' MS ring, outer body base and top cover frame, along with blade set, down road with clamp, canopy, capacitor etc and after replacement of new body parts refixing/ hanging the on same place of ceiling with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection and old item deposited to store complete all as specified and directed . |
| 8 | M&L for taking down of old unserviceable ceiling fan of size 1200 mm sweep single phase 220 Volt AC and replacement with by all new one of body frame parts and it all connected fixing accessories of system like fan motor with shaft & rotar assembly ball bearing, in side 'O' MS ring, outer body base and top cover frame, along with blade set, down road with clamp, canopy, capacitor etc and after replacement of new body parts refixing/ hanging the on same place of ceiling with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection and old item deposited to store complete all as specified and directed . |
| 9 | M&L for taking down of old unserviceable air circulation ventilation fan of size 300 MM sweep single phase 220 Volt AC and replacement with by all new one of body and it all connected fixing accessories of system like outer body frame cover including back and face cover with holding support channel made out of high quality PVC body framing work along with louvers, and shutter, fan motor assembly with shaft and blade and it all connected fixing accessories of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut ,bolt etc complete including providing of suitable type flat flexible cable and making electric connection and old item deposited to store complete all as specified and directed. |
| 10 | M&L for taking down of old unserviceable wall mounting fan of size 400 mm sweep single phase 220 Volt AC and replacement with by all new one of body parts like and it all connected fixing accessories of system like fan motor with rotation rotar assembly and cover, PVC stand bracket base frame, along with pull cord oscillating and speed knob system, single piece blade, outer mild steel guard frame system with wall bracket attachment with fixing arrangement accessories etc complete set etc and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc including providing of suitable type flat flexible cable and making electric connectionand old item deposited to store, complete all as specified and directed. |
| 11 | Supply and fixing in replacement of MS ‘U’ clamps with rubber reel, nuts bolts and washers complete with split pins suitable for ceiling fans, complete all as specified and directed |
| 12 | Supply and fixing in replacement of upper/lower canopy as per sample for 1200mm/1400mm sweep fans suitable for ceiling fans complete all as specified and directed. |
| 13 | Supply and fixing in replacement of metallic type fan blade including nut, bolt and crew complete suitable for ceiling fan1200/1400 mm sweep, complete all as specified and directed |
| 14 | Supply and fixing in replacement of metallic type fan blade including nut, bolt and crew complete suitable for exhaust fan of size 300 to 600mm of size sweep, complete all as specified and directed |
| 15 | Supply and fixing in replacement of PVC blade type fan blade including nut, bolt and crew complete suitable for exhaust fan of size 100 to 300 mm sweep, complete all as specified and directed |
| 16 | Supply and fixing in replacement of single phase capacitor AC 220 volts 50Hz of rated capacity 3.5 to 4 MFD ISI marked and making electric wiring connection complete including taking down /refixing of old capacitor, complete all as specified and directed. |
| 17 | Supply and fixing in replacement of single phase capacitor AC 220 volts 50Hz of rated capacity 1.5 to 2.5 MFD ISI marked and making electric wiring connection complete including taking down /refixing of old capacitor, complete all as specified and directed. |
| 18 | Supply and fixing in replacement of ball bearing suitable for ceiling/exhaust fans/wall mounting fan of all as per existing type of sample & size/shape and properly match to the each other as per the existing type of bearing model & make of item complete and suitable using for any type fan systems, complete all as specified and directed |
| 19 | Supply and fixing in replacement of geyser heating element of rating capacity 1.5KW to 2.0 KW along with 'o' ring washer made out of copper / brass alloy complete set all as per existing type of sample / shape like a round, triangular, square, porcelain type, round with threaded type etc and properly match to the each other as per the existing model & make of item and suitable using for geyser of storage capacity 25 Ltrs to 50 ltrs system, complete all as specified and directed |
| 20 | M&L for taking down of old unserviceable electric water storage heating system of capacity 25 ltrs and replacement with by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work along with hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection and old item deposited to store, complete all as specified and directed |
| 21 | M&L for taking down of old unserviceable electric water storage heating system of capacity 50 ltrs and replacement with by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work along with hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection and old item deposited to store, complete all as specified and directed |
| 22 | Supply and fixing in replacement of round & squire shape indicating lamp Red /Green or as per existing sizes sample / type model suitable display for geyser on off indicating system, complete all as specified and as directed. |
| 23 | Supply and fixing in replacement of geyser inner cold/hot water circulating apparatus syphone unit assembly (Geysers assembly) all as per existing type of sample/size and properly match to the each other as per the existing type model & make of item complete set including duly fixed it inside of existing geyser system and suitable used for geyser capacity 25 Ltrs to 50 Ltrs including also replacement of defected rubber jain washer 'o' ring type with nuts and bolts & split gas pin system including removing all electric and water connection along with taking down of geyser from existing site position and dismantling / taking out of old defected geyser assembly, complete all as specified and as directed. |
| 24 | Supply and fixing in replacement of Gun metal vertical type non return valve of size 15 mm dia bore type all as per existing type of sample & size/shape and suitable using for geyser of storage capacity 25 Ltrs to 50 ltrs systems, complete all as specified and directed. |
| 25 | Supply and fixing in replacement of geyser storage hot water inner tank suitable for geyser of capacity 25 Litre and made out of heavy duty stainless steel sheet metal body system or all as per existing type of sample & shape /size and properly match to the each other as per the existing type model & make of item complete set including duly fixed it inside of existing geyser system and suitable used for geyser capacity 25 Ltrs and including replacement of defected rubber jain washer 'o' ring type with nuts and bolts and removing all electric and water connection along with taking down of geyser from existing site position and dismantling / taking out of old defected geyser tank complete all as specified and as directed |
| 26 | Ditto all as per above serial item No 25 described here in before, but storage hot water inner tank for geyser of capacity 50 Litre, complete all as specified and directed. |
| 27 | Supply and fixing in replacement of geyser thermostat large type with having temp adjustable setting made out of copper / brass alloy metal all as per existing type of sample /size and properly match to the each other as per the existing type model & make of item complete and suitable uses for geysers of capacity 25 ltr to 50 Ltrs system, complete all as specified and directed. |
| 28 | Supply and fixing in replacement of single or double square type of geyser auto cut thermostat unit assembly complete all as per existing type of sample / Shape /size and properly match to the each other as per the existing type model & make of item complete set and suitable uses for geysers of capacity 25 litre to 50 Litres system, complete all as specified and as directed |
| 29 | Supply and fixing in replacement of air release safety valve all as per existing type of sample /size and properly match to the each other as per the existing type model & make of item complete and suitable uses for geyser of capacity 25 ltr to 50 litrs system complete all as specified and as directed. |
| 30 | Supply and fixing in replacement of the insulating material i.e. glass wool materials for filling inside area in between of geyser outer body and hot water tank system suitable for geyser capacity 25 ltr to 50 litre system including dismantling / taking out of geyser from existing site position and taking out of existing glass wool from in side of geyser all as specified and as directed. |
| 31 | Supply and fixing in replacement of heavy duty PVC braided PVC connection pipe of size 15 mm dia and 450 mm long along with two nos of brass nut and nylon washer complete, all as per existing sample type/size, complete all as specified and as directed. |
| 32 | Supply and fixing in replacement of heavy duty steel wire braided chromium plated stainless steel metal body connection pipe of size 15 mm dia and 450 mm long along with two nos of brass nut and nylon washer all as per existing sample type/size, complete all as specified and as directed. |
| 33 | Supply and fixing in replacement of geyser body outer cover top plate made of MS sheet all as per existing size model / sample suitable uses for 25 to 50 ltrs capacity geysers system. complete including dismantling / taking out of geyser from existing site position and taking out of existing top cover of geyser and refixing the geyser complete all as specified and as directed. |
| 34 | Supply and fixing in replacement of geyser body inspection bottom cover plate made of MS sheet all as per existing size model / sample suitable uses for 25 to 50 ltrs capacity geysers system complete including dismantling / taking out of geyser from existing site position and taking out of existing bottom cover of geyser and refixing the geyser complete all as specified and as directed. |
| 35 | Supply and fixing in replacement of heavy duty large type size of MS wall fasteners (geyser bolt) of suitable of size 10 mm dia not exceeding up to 100 mm long along with nut , bolt etc including drilling ,grouting it on wall for hanging of geyser and making to good the disturbed surfaces complete including dismantling / taking out of geyser from existing site position and refixing the geyser complete all as specified and as directed. |
| 36 | Supply and fixing in replacement of heavy duty large type size of wall mounting clip/ bracket of suitable size ( heavy duty MS / GI) etc including drilling ,grouting it on wall for hanging of geyser and making to good the disturbed surfaces complete including dismantling / taking out of geyser from existing site position and refixing the geyser complete all as specified and as directed. |
| 37 | Supply and fixed in replacement of geyser outer body cover frame complete set all as per existing shape size /type / sample and made out of or fabricated on MS sheet/PVC body and duly fixed outside of geyser system of geyser capacity 25 Litres system and including dismantling / taking out of geyser from existing site position and taking out of existing outer body cover of geyser and refixing the geyser complete all as specified and as directed |
| 38 | M&L for disconnection of electric wire and water PVC pipe connections and taking down/out of geyser from existing site position for repairing purposed and dismantling/ taking out of inner storage hot water tank, geyser assembly, heating element, glass wool etc from in side the geyser of capacity 25 to 50 litre and including remove and cleaning of blockage / depositing the scale, silt, sludge, dirty particles material from the in side of the storage heating tank or assembly area of system through method of descaling with the help of chemical acid or manually mechanically system and after washing in side of the storage heating tank or geyser assembly, heating element, thermostat system including tighting, adjustment, servicing and also rectification the leakage problem of hot tank through hot & cold welding / brazing (gas or electric welding) work system for steel tank / copper tank complete and after repair reassemble and proper filling the glass wool and replacement of defected items in side around the tank and fixing of geyser on same position and testing on load, complete all as specified an as directed. |
| 39 | Supply & Installation testing and commissioninf of BLDC motar suitable for 1200mm sweep ceiling fan , complete with electronic controller/driver, RF/ ir receiver, connecting ieads, mounting arrangement, fixing hardware, connection to exting fan point and testing complete as required. |
| 40 | Supply and fixing in replacement PVC insulated twin core twisted copper flexible cable of size 23/ 0.0076 and making connection, complete all as specified and directed. |
| 41 | Supply and fixing in replacement single core copper wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 6.0 Sq.mm (Nominal area), complete all as specified as directed |
| 42 | Supply and fixing in replacement single core copper wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 4.0 Sq.mm (Nominal area), complete all as specified as directed. |
| 43 | Supplying and fixing in replacement twin core flat/ circular cable of size 10 sqmm 1100 Volts grade, heavy duty cable PVC insulated multistranded aluminium conductor cable served with inner sheathed of PVC tap and overall PVC sheathed and making electric connection, complete all as specified and directed. |
| 44 | Supplying and fixing in replacement twin core flat/ circular cable of size 6 sqmm 1100 Volts grade, heavy duty cable PVC insulated multistranded aluminium conductor cable served with inner sheathed of PVC tap and overall PVC sheathed and making electric connection, complete all as specified and directed. |
| 45 | Supply and fixing of rigid non metalic PVC conduit of size 15/20 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of pipe on wall in proper size of clamps, nut bolt and washer etc., complete all as specified.and directed . |
| 46 | Supply and fixing flexible pipe (Nominal area 20 mm ) suitable for cable or wire protection, complete all as specified and as directed |
| 47 | Supplying and fixing in replacement LED bulb of rated capacity 7 to 9 watt of shape pin or threaded type required in colour white / warm type, complete all as specified and directed. |
| 48 | Supply and fixing PVC Casing capping of size 15/20 mm heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of casing capping on wall in proper size of clamps, nut bolt ,and washer etc complete all as specified.and directed. |
| 49 | Notes :-An amount of Rs 65010.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
