|
| 1 | Dismanting pucca brick or lime work including stacking seriviceable materilas in countable stacks within 15m. Lead and disposal of unseviceable materilas with all leads as per direction of E/I |
| 2 | Providing 75 B brick work in C.M (1:6) in super structure and plinth with approved quality of clean coarse sand ---- do---do--- as per direction of E/l. |
| 3 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) (5.3.10.) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Lintele |
| 5 | Providing 12mm thick water proof cement plaster (1:4) --do --do |
| 6 | Supply atsite Angle iron postb & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. Etc. complete Angle 50 mm x50mmx6mm. |
| 7 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length, ( total length 90 m ), having 50 nos rounds per6 metre length , upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R. B.T. reinforced barbed wire, stud tied with. |
| 8 | Provinding primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurment Area shall be multiplied by the co-efficient as indicated in building specificaton.) |
| 9 | Finishing walls with Premium Acrylic Smooth exterior paint with of required shade: Old work(Two or more coats applied @ 1.67 ltr/ 10 sqm) over and including priming coat exterior primer applied @ 2.20kg/10sqm. (D.S.R 13.46.1) |
| 10 | Providing two coates of synthetic enamel paint of approved shade and make over steel surface thoroughly specification and taxes all complete as per building specification and direction of E/i. |
| 11 | Earth work in excavation in foundation trenches in foundation in ordinary soil (vide classification of soil -A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts levelling ramming the foundation trenches, removing, roots of trees shurbs all complete as per approved design building specification and direction of E/l. + Extra for earth work in hard soil as per approved design building specification and direction of E/l.(Vide classification of soil item -B) |
| 12 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 13 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. |
| 14 | Providing and laying in position specified grade of reinforced cement excluding the cost of centering and shuttering - all work up to plinth level: 1:1.5:3 (1 Cement : 2 Coarse sand (zone -III) : 4 Graded stone aggregate 20 mm nominal size) |
| 15 | Centering and shuttering including strutting, propping etc and removal of form for foundation |
| 16 | Providing R.C.C work in walls M-200 with nominal mix of (1:1.5:3) in Pilaster, buttresses, Plinth and string course, fillets, columns, Pillars, Piers, with approved ------do----do---as per direction of E/l |
| 17 | Centering and shuttering including strutting, propping etc and removal of form for Column/Stiffiner |
| 18 | Finishing walls with Premium Acrylic Smooth exterior paint with of required shade: Old work(Two or more coats applied @ 1.67 ltr/ 10 sqm) over and including priming coat exterior primer applied @ 2.20kg/10sqm. (D.S.R 13.46.1) |
| 19 | Providing 12 mm thick C.P (1:6) with clean coarse sand of F.M 1.5 ----do---do--- all complete job. |
| 20 | Providing Tor steel reinforcement of 8, 10 mm and 12 mm dia bar as per approved design and drawing TMT Fe 500 (Only vaild for Tata (tiscon), Sail,JSPL, Electrosteel Steel Ltd. Bokaro and Viraz (RINL)all complete as per building specification and direction of E/I (5.5.5) (b) |
| 21 | Supplying, fitting, and fixing M.S. Grill gate with M.S. grill made of 20X6mm M.S. Flate or 16mm M.S. angle frame of size 60x60x6mm, including cost of fabricated approved neccessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all com. as per specification and direction of E/I. (5.5.30.) |
| 22 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) (5.8.41.) |
| 23 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (5.8.45.) |
| 24 | Carriage of materialsCement |
| 25 | Sand lead |
| 26 | Brick |
| 27 | Stone chips lead |
| 28 | Cost of drilling 200mmx165mmx125 m dia deep bore well supplying ll material labour and tools and equipment for drilling 200/165 mm dia bore well in any kind of sell rock by using DTH super rig machine and bell hammer technology inclusive of molillisation de molillisation of rig air compressor all assesseries tools and plant labour etc., all compete job inclusive transportation charges etc. (a) From 0.0M to 50.00 M below G.L. |
| 29 | (b) From 51.00 M to 125.00 M below G.L. |
| 30 | (C) From 125.00 M to 180.00 M below G.L. |
| 31 | Supplying assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in -charge. 200 mm nominal size dia |
| 32 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 33 | providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete 200 mm dia |
| 34 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete : 150 mm clamp |
| 35 | Supply 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump sharft and polypro oylene/ noryl impellel . Motor suitable for working on 415 + 10, 3HP, 50 Hz , AC supply with cable guard, thurst, water proof winding shall be provided. the pump set shall be sutable for diret coupling Pump shall have sutibale outlet as per manufacturers desgin. Anti thurst steam lined non return valve shall be provided with each pump . submersible pump set 100mm dia (with polypropylene/Norly Impeller ) up to 20 stages 2 HP |
| 36 | Supply fitting and fixing of standered make starte pannel Board with arrangement of necssury protection including all taxes , all complete job as per direction of E/I. |
| 37 | Supply fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes , royalty etc all complete job as per directionof E/I. |
| 38 | Supply fitting and fixing lowering 40mm dia G.i. collumn pipe - do - do - all complete job as per direction of E/I. |
| 39 | Add 18% G.S.T |
| 40 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
