Tender For Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. For Construction, Erection, Completion, Testing & Commissioning Of Water Supply Works Such As Over Head Tank, Tube Well, Rising Main, Distribution System, Pump H, Chhitauni-Uttar Pradesh

TDR : 54997506

Tender Notice
BOQ

14 Days Left

Chhitauni , Uttar Pradesh

Tender Brief : Tender For Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. For Construction, Erection, Completion, Testing & Commissioning Of Water Supply Works Such As Over Head Tank, Tube Well, Rising Main, Distribution System, Pump H

Document Fees
₹ 23600 /-

EMD
₹ 2667000.0 /-

Tender Value
₹ 26.67 Crore /-

Submission Date
23-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Pump House
2	Pump House Cum Chloronome Room:- Soil Investigation, preparing plan & elevation carrying structural design as per relevant seismic zone and Construction of Pump House- Cum-Chloronome with foundation as per requirement of structural design of size 3.60 x 3.0 M x 3.0 & 1.80 x 2.60 x 3.0 M & bypass chamber with supply and fixing of V notch, including supply of all materials, labour, T&P etc. required for proper completion of work as per indicative departmental type design subject to approval of Engineer-in-charge.
3	Zone-1
4	Zone-3
5	Zone-5
6	Girder Pillar:- Soil Investigation, carrying structural design as per relevant seismic zone and Construction of Girder Pillar Type for rebore of tubewell with excavation of earth, 1:4:8 PCC in foundation with cement, fine sand, 40 mm gauge brick ballast, first class brick work with 1:4 cement, coarse sand in substructure and super structure, plaster with 1:4 cement and coarse sand, finishing walls with approved apex paint in two coat on new work, supply and fixing of cast iron foot rest and rolled steel joist ISMB 225x110 mm in 3.90 m length etc. including supply of all materials, labour, T&P etc. required for proper completion of work as per departmental type design.
7	Zone-4
8	Rennovation of Pump house with supply and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, Z-section M.S. Window with grill with one coat of red oxidised primer,Supply and fixing of cement Jali 45x30 cm at 15 cm above floor level in the Chloronome, R.C.C. work(with use of C.C. mixer) in 1:1.5:3 proportion of cement, coarse sand and 20mm nominal size stone grit in Lintels, R.C.C. Baffle Wall and Beams, 40mm thick 1:2:4 plain cement concrete floor, dismentling old plaster and new plastering work on existing surface,Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer over approved brand of cement based putty of average thickness 1 mm etc. including supply of all materials, labour, T&P etc. required for proper completion of work
9	Zone-2
10	Zone-4
11	STAFF QUARTER
12	Soil Investigation, preparing plan & elevation carrying structural design as per relevant seismic zone and Supply of all meterials, labour, T&P, complete and construction of Single Room Staff quarter for pump operator, chaukidar, pump attendent with first class brick work with 1:4 cement & coarse sand in superstructure and 1:6 in substructure, R.C.C. work with Cement approved Coarse sand and 20 mm Gauge approved stone ballast and other works, with electrification and sanitary with bathroom tiles work etc. complete as per indicative departmental type design subject to approval of Engineer-in-charge.
13	Zone-3
14	Zone-5
15	Repair of staff quarter
16	Supply all materials, tool & plants etc. for repairing work of existing staff quarter including dismentling old plaster, doors and windows and supply and fixing of new doors and windows with frame, plastering work on dismentlled surface,Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer over approved brand of cement based putty of average thickness 1 mm, supply and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern etc complete as per Unit Estimate / upto satisfaction of engineer in charge.
17	Zone-1
18	Zone-2
19	Boundary wall approach road etc
20	PROPOSED NEW WATER WORKS CAMPUS
21	Soil Investigation, preparing plan & elevation carrying structural design as per relevant seismic zone and Supply of all materials, labour T&P etc. for construction of 1.5 m height boundary wall with I st class brick work in 1:4 with cement and coarse sand mortar in foundation and super structure, 25 mm thick damp proof coarse with cement, stone grit 12 mm and approved coarse sand 1:1.5:3 with insluding water-proofing materials asordered by the Engineer- as per requirement of structural design to indicative departmental type design subject to approval of Engineer-in-charge.
22	Supply and fixing of 3.60 m wide main gate & 1.20 m wide wicket gate including construction of RCC pillars with 1:1.5:3 cement, coarse sand, and 20 mm gauge approved stone ballast, first class brick work with 1:4 cement & coarse sand etc. as per departmental type design including supply of all materials, labour, T&P etc. required for proper completion of works.
23	Supply of all materials, labour T&P etc. and construct Interlocking road in water works compound.
24	Construction of 300x300 mm size Square drain
25	Provide all meterial, labour, T&P etc. required for proper completion of work including leveling, dressing for development of water works site.
26	Filling of carted earth in water works campus.
27	MCS Room / Scada Building:- Soil Investigation, carrying, preparing plan & elevation structural design as per relevant seismic zone and Construction of MCS Room with foundation as per requirement of structural design, supplying of all material, pipes, grates, etc. complete in all respect. Indicative type design subject to approval of Engineer-in-charge
28	REPAIRING WORK OF BOUNDARY WALL
29	1st class brick work in 1:4 cement and Coarse sand mortar in damaged portion of boundary wall including supply of all materials labour, T&P etc. required for proper completion of the work.
30	12mm thick plaster with cement mortar consisting cement coarse sand in ratio 1:4 work minimum thickness not to be less than 10mm on boundary wall including supply of all materials, labour T&P etc. required work.
31	Painting on boundary wall with one priming coat and one coat of approved exterior paint like Apex with putty including supply of all labour, material T&P etc. required for proper completion of work.
32	RISING MAIN
33	Earthwork in excavation in pipe line with lift upto 1.5 m. and lead upto 50m. Including filling back, watering, ramming of excavated earth into trenches and disposal of sur plus earth within 50 metre with display of flags, caution boards, fencing, lighting, watching etc complete.
34	IN Ordinary Soil
35	Supply of ISI marked S&S Centrifugally Cast (Spun) Ductile Iron pipes as per IS : 8329-2000 suitable for Push on jointing by compatible rubber gasket confirming to IS : 9523 : 1980 at divisional store including all taxes
36	200 mm dia - Class K-9 With bypass
37	150 mm dia - Class K-9 with bypass
38	100 mm dia - Class K-9 with bypass
39	Carting from store (upto 8Km. or within municipal limit which is more) following sizes of D.I. pipes, specials fittings etc. to the site of work. Lowering the same into trenches and laying to true alignment and gradient including testing of pipe lines, cutting of pipes for making joints.
40	200 mm dia - Class K-9 With bypass
41	150 mm dia - Class K-9 with bypass
42	100 mm dia - Class K-9 with bypass
43	Supply of following size screwed down type C.I. single ball air valves.
44	50 mm dia
45	Carting from store to site of works (upto 8Km. or within municipal limit which is more) of following sizes screwed down air valve to site of work, fixing in position including boring and threading in the main etc.complete including cost of boring the water main and subsequent back filling but excluding cost of air valve.
46	50 mm dia
47	Supply of all materials, labour T&P etc. and construction of air valve chamber complete required for proper completion of the work as per type design (with RCC cover)
48	Provision of construction of RCC thrust block of grade M-20 for water hammer at bends of pipe.
49	Supply of reinforcement including cutting bending etc complete for surface reinforcement.
50	Provision for crossing of nala, road, culvert excluding supply of C.I. tyton pipe/MS pipe and specials, but including their laying, jointing etc. complete.
51	More than 1 meter 150 dia
52	Less than 1 meter 150 dia
53	More than 1 meter 200 dia
54	Less than 1 meter 200 dia
55	Dismantling of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. and also including temporary reinstatement of road by old materials.
56	Interlocking Road
57	Permanent reinstatement of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. As per PWD specifications (Detail attached) deducted gst
58	Interlocking Road
59	Distribution System
60	Excavation of earth in ordinary soil (loam clay or sand) for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering ramming of the excavated earth into the trench and also disposal of surplus earth upto 50m from the center of the trenches including supply of all material labour T&P etc complete as per instructions of Engineer -in -charge.
61	Supply of following sizes HDPE Pipe PN-6: Class PE-100 for distribution system conforming to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest / relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading unloading but excluding the cost of trenches all complete as per instructions of Engineer -in - charge.
62	90 mm dia HDPE Pipe
63	110 mm dia HDPE Pipe
64	140 mm dia HDPE Pipe
65	160 mm dia HDPE Pipe
66	Carting from store (upto 8Km. or within municipal limit which is more) following sizes of HDPE pipes, specials coupling, fittings etc.to the site of work. Lowering the same into trenches and laying to true alignment and gradient including testing of pipe lines (excluding trenching), but including cutting of pipes for making joints.
67	90 mm dia HDPE Pipe
68	110 mm dia HDPE Pipe
69	140 mm dia HDPE Pipe
70	160 mm dia HDPE Pipe
71	Supply of following sizes (D.I.) pipes for rising main/distribution system conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials such as specials conforming to latest/relevant I.S. specifications suitable for D.I pipes as per IS-1239 /2000 and IS 8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading unloading but excluding the cost of trenches. All complete as per instructions of Engineer -in - charge.
72	200 mm dia DI Pipe K-7
73	250 mm dia DI Pipe K-7
74	300 mm dia DI Pipe K-7
75	350 mm dia DI Pipe K-7
76	400 mm dia DI Pipe K-7
77	Carting from store (upto 8Km. or within municipal limit which is more) following sizes of D.I. pipes, specials fittings etc. to the site of work. Lowering the same into trenches and laying to true alignment and gradient including testing of pipe lines, cutting of pipes for making joints.
78	200 mm dia DI Pipe K-7
79	250 mm dia DI Pipe K-7
80	300 mm dia DI Pipe K-7
81	350 mm dia DI Pipe K-7
82	400 mm dia DI Pipe K-7
83	Supplying the following dia C.I.D./F sluice valves, class I, working pressure 10 Kg/cm2 confirming to IS: 780/1969 or its latest amendments, including valve fittings & Dismantling Joints as per requirement F.O.R. destination, and lowering them into the already prepared trenches, complete and also including supply of jointing materials etc. complete .including all taxes and insurance, as per instructions of Engineer -in -charge.
84	Sluice valve
85	80 mm dia
86	100 mm dia
87	150 mm dia
88	200 mm dia
89	250 mm dia
90	300 mm dia
91	350 mm dia
92	400 mm dia
93	Scour Valve
94	80 mm dia
95	Carting of sluice valves / scour valve from store to site of works (upto 8Km. or within municipal limit which is more) of following sizes to site of work, lowering in already prepared trenches and fixing them in position ,making flange joints including supply of all materials such as bolts, nuts, rubber insertion, white lead, testing etc . complete.
96	Sluice valve
97	80 mm dia
98	100 mm dia
99	150 mm dia
100	200 mm dia
101	250 mm dia
102	300 mm dia
103	350 mm dia
104	400 mm dia
105	Scour Valve
106	80 mm dia
107	Supply of single / double ball type air valve conforming to latest/relevent I.S. specifications including all taxes and insurance, complete (including supply of jointing materials and Valve fittings etc complete) as per instructions of Engineer.
108	50 mm
109	Supply of under ground sluice value type fire hydrant consisting of 80 mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete conforming to latest/relevent I.S. specifications including all taxes and insurance up to site of work (including supply of jointing materials and Valve fittings etc. complete as per instructions of Engineer ‐in ‐ charge.
110	Carting from store to site of works (upto 8Km. or within municipal limit which is more) of following sizes screwed down air valve to site of work, fixing in position including boring and threading in the main etc.complete including cost of boring the water main and subsequent back filling but excluding cost of air valve.
111	50 mm
112	Carting from store to site of works(upto 8Km. or within municipal limit which is more) of 80mm dia size flanged fire hydrant to site of work, fixing them in position for flanged joints .
113	Supply of all materials, labour, T&P etc. and construction of sluice valve/scour valve chamber with RCC cover as per type design.
114	Surface box type including supply and fixing of 150mm x 150 mm size surface box.
115	Masonry type
116	Supply of all materials, labour T&P etc. and construction of 350x350x500 mm size air valve chamber complete required for proper completion of the work as per type design (with RCC cover)
117	Supply of all materials, labour, T&P etc. and construction of 1400x1200x850 mm fire hydrant chamber complete required for proper completion of the work as per type design (with RCC cover)
118	Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3, for pipe line, including supply of MS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of Engineer -in -charge.
119	Providing reinforcement of Thrust block for reinforced concrete work including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with wire at every inter-section, complete as per drawing and direction.
120	Dismantling of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. and also including temporary reinstatement of road by old materials.
121	Bituminous Road as per NP specs
122	Bituminous Road as per PWD specs
123	Brick Road (BOE)
124	CC Road
125	Inter locking tile Road
126	Permanent reinstatement of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m.
127	Bituminous Road as per NP specs
128	Bituminous Road as per PWD specs
129	Brick Road (BOE)
130	CC Road
131	Inter locking tile Road with 100 mm GSB base
132	Making Nala crossing falling on alignment of pipe line including cost of Casing pipe one no. excluding of Carrier pipe., including supply of all materials, labour, T&P, etc complete required for proper completion of work.
133	Width 0.3 m to 1.0 m
134	Width 1.0 m to 2.0 m
135	Total station survey/DGPS of the project area, construction of level pillars at all important locations, soil investigation, designing (As per relevant seismic zone), supplying all materials, for construction of R.C.C. Over Head Tank following type Capacity and staging above ground level with main components, including cost of all survey, designing, geotechnical investigation, testing ( footing raft/pile will be provided based on actual bearing capacity of soil for contractor is advised to investigate the soil before tendering), with supply of design and drawings and its vetting from any national level Government engineering institute.All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 or as per latest I.S. code with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456. Seismic effects ( seismic zone -IV) and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M25 balcony, ladder with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case,bolcony and top dome, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specifications with all jointing materials for proper completion of work, Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works from overflow and washout chamber to suitable point outside the compound.Supplyand fixing of 1.8 m hight M.S. Gate in staire case at 2nd fligth as per direction of engineer -in-charge. Priming and Painting of all concrete surface and steel pipe works with water based exterior paint of approved make and quality as mentioned in tender document over one priming coat on new work with two coats, to give an even shade and anticorrosive paints including prepration of surface, disposal of water from overflow and washout chamber to suitable point outside the water works compound including excavation of trenches.laying of pipe line &supply of all matrials labour T&P etc. required for proper completion of the work. AS PER DIRECTION and upto satisfaction of engineer in charge.
136	For Zone-3 (1100KL/22M)
137	For Zone-5 (2050KL/22M)
138	Supply all materials labour T&P etc. complete & repairing & painting of below mentioned capacity existing RCC Overhead tanks as per Unit Estimate / upto satisfaction of engineer in charge.
139	For Zone-1 (175KL/15M)
140	For Zone-2 (700KL/15M)
141	For Zone-4 (100KL/15M)
142	Making house connection with 20mm(OD) HDPE main with Supply,Carting ,laying , jointing and fixing of the 15 mm (OD) G.I. pipe ,I.S.I. Mark Gunmetal Ferrul , I.S.I. Mark saddle/clamp of required size, C.I. bib kock of approved quality, J-Hook or M.S.U-clamp, 25cmX25cmX25cm C.C grouting of unsupported G.I. pipe all connection in inside the house and support on wall with suitable clamp as per directed by engineer-in charge including cost of Dismentling and Reinstatment of Roads, all jointing material, specials, labour,material T&P and its testing etc. complete in all respect upto satisfaction of engineer charge.( contractor will have to submit list of house hold survey for which no extra payment will be done)
143	B.O.E Road
144	Upto 110 mm dia
145	For 125 mm to 160 mm dia
146	For 180 mm to 250 mm dia
147	For 300 mm dia
148	C.C. Road
149	Upto 110 mm dia
150	For 125 mm to 160 mm dia
151	For 180 mm to 250 mm dia
152	For 300 mm dia
153	Bituminous road
154	Upto 110 mm dia
155	For 125 mm to 160 mm dia
156	For 180 mm to 250 mm dia
157	For 300 mm dia
158	interlocking road
159	Upto 110 mm dia
160	For 125 mm to 160 mm dia
161	For 180 mm to 250 mm dia
162	For 300 mm dia
163	Earthen road
164	Upto 110 mm dia
165	For 125 mm to 160 mm dia
166	For 180 mm to 250 mm dia
167	For 300 mm dia
168	Shifting of Existing House Connection to New Pipe Line with requared 20mm(OD) HDPE main with Supply,Carting ,laying , jointing and fixing of the 15 mm (OD) G.I. pipe ,I.S.I. Mark Gunmetal Ferrul , I.S.I. Mark saddle/clamp of required size, C.I. bib kock of approved quality, J-Hook or M.S.U-clamp, 25cmX25cmX25cm C.C grouting of unsupported G.I. pipe all connection in inside the house and support on wall with suitable clamp as per directed by engineer-in charge including cost of all jointing material, specials, labour,material T&P and its testing etc. complete in all respect upto satisfaction of engineer charge.( contractor will have to submit list of house hold survey for which no extra payment will be done)
169	ZONE-I
170	CONSTRUCTION OF TUBEWELL
171	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
172	Drilling of 500/450 mm dia bore hole by DC Rig m/c complete with all required material, labour & T&P etc. complete.
173	500 mm dia Drilling from 0 to 60 M BGL
174	450 mm dia Drilling from 61 to 100 M BGL
175	450 mm dia Drilling from 101 to 165 M BGL
176	Logging of bore hole by departmental/approved electric logger.
177	TUBEWELL ASSEMBLY
178	M.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & as per typed design complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
179	200 mm dia
180	150mm dia
181	LOWERING OF ASSEMBLY
182	Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
183	200 mm dia size Assembly from 0 to 54 M BGL
184	150 mm dia size Assembly from 55 to 100 M BGL
185	150 mm dia size Assembly from 101 to 150 M BGL
186	PEA-GRAVEL
187	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed, Screened and properly Stacked at Site.
188	DEVELOPMENT OF TUBEWELL
189	By Air Compressor
190	Transportation, Erection & Dismantling of 250 PSI Air Compressor.
191	Development of T.W. by 250 PSI Air Compressor with all required material, labour, T&P etc.
192	By O.P. Unit
193	Transportation, Erection & Dismantling of 3 Cusec O.P. Unit and Yield Test.
194	Development of T.W. by 3 Cusec O.P. Unit with all required material, labour, T&P etc.
195	Yield test of tubewell along with chemical and bacteriological analysis of tubewell's water.
196	Pumping plant and Other instrumentation work
197	SITC of 500 LPM, 53 m head 10 H.P. submersible pump set with 24 meter column pipe(80mm dia) assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
198	SCADA Compatable chlorinating system
199	3M long heavy duty column pipe same as above (Extra/Spare)
200	20 KVA Servo Voltage stabilizer.
201	CE/UL Certified Intelligent Smart Energy Meter
202	Motor operated Actuator for with Sluice Valve of size upto 150 mm
203	CE/UL certified electromagnatics flow meter of upto 150mm dia
204	Soft Stater with RS485Port- 400 V Class,
205	Auto Phase reversal unit with inbuilt time delay & enclosure (confirm to IEC: 60947-1 & IEC:60947-b-1
206	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
207	CE/UL Certified Pressure Transmiter .
208	Complete Cabling for Tubewell including all power & control cables of the equipment at pumphouse and OHT
209	SCADA AUTOMATION OF Tubewell
210	SCADA AUTOMATION ITEMS
211	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification.
212	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
213	CE/UL Certified Surge protector for control panel
214	CE/UL certified 7\\" HMI touch screen suitable to communicate with PLC/RTU for local display & control of process parameters.
215	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
216	Installation, commissioing & testing for one tubewell
217	Trial Run for 3 month period for one tubewell
218	Instrumentation of OHT
219	CE/UL Certified Radar type level Transmitter for OHT
220	Flow control Valve 200 mm size
221	Motor operated Actuator with Sluice valve 200mm Size
222	Electromagnetic Flowmeter of 200mm Size
223	CE / UL certified Pressure Transmitter
224	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
225	SCADA DISPLAY
226	CE/UL & BIS Certified industrial grade LED MONITOR with latest configuration as per specification.
227	(i) 65'' LED MONITOR With latest configuration
228	Desktop/PC with i5/i7 prosessor for as per spec mentioned in technical bid document.
229	CE/UL Cerfified 5 KVA UPS with batteries as per spec mentioned in technical bid document.
230	Full development version of reqrired TAGS SCADA Software with counstomization of software for MCS as per requirement as per spec mentioned in technical bid documents.
231	CE/UL certified master control room PLC with redundant CPU & power supply at MCS in IP54 enclouser as spec mentioned in technical bid documents.
232	EC/UL certified Field gateway agent for transfering data from MCS to Central control room.
233	GSM based wireless/Broadband/Equipment communication system for PLC capable to tranfer & received data & gather data from remote sited to control station, All accessoried included signal enhancer antenna along with running expences till DLP.
234	CE/UL Certified Firewall for network protection.
235	SURGE PROTECTOR FOR ETHERNET communication protection.
236	CE/UL certified industrial grade Ethernedt Switch
237	Mobile App Facility system architecture (industries internet baded & viewed through mobile apps for increased local & Remote Visibility).
238	Canon/HP or eqrivalent Laser Printe 1018 or equivement.
239	Security Surveillance IP camera with recorded (optional).
240	Installation, Commissioning & testing inclidung required funiture, A/c etc.
241	Trial run for 3 month period.
242	3 Months Trial and Run
243	ZONE-II ( 02 No Existing Tubewell)
244	Pumping plant and Other instrumentation work
245	SITC of 800 LPM, 53 m head 20 H.P. submersible pump set with 24 meter column pipe(100mm dia) assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
246	SCADA Compatable chlorinating system
247	3M long heavy duty column pipe same as above (Extra/Spare)
248	40 KVA Servo Voltage stabilizer.
249	CE/UL Certified Intelligent Smart Energy Meter
250	Motor operated Actuator for with Sluice Valve of size upto 150 mm
251	CE/UL certified electromagnatics flow meter of 100 mm dia
252	Soft Stater with RS485Port- 400 V Class,
253	Auto Phase reversal unit with inbuilt time delay & enclosure (confirm to IEC: 60947-1 & IEC:60947-b-1
254	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
255	CE/UL Certified Pressure Transmiter .
256	Complete Cabling for Tubewell including all power & control cables of the equipment at pumphouse and OHT
257	SCADA OF AUTOMATION
258	SCADA AUTOMATION ITEMS FOR OLD EXT. T/W
259	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification.
260	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
261	CE/UL Certified Surge protector for control panel
262	CE/UL certified 7\\" HMI touch screen suitable to communicate with PLC/RTU for local display & control of process parameters.
263	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
264	Installation, commissioing & testing for one tubewell
265	Trial Run for 3 month period for one tubewell
266	Instrumentation of OHT
267	CE/UL Certified Radar type level Transmitter for OHT
268	Flow control Valve 300 mm size
269	Motor operated Actuator with Sluice valve 300mm Size
270	Electromagnetic Flowmeter of 300mm Size
271	CE / UL certified Pressure Transmitter
272	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
273	Three Month Trial & Run for 03 Month
274	ZONE-III
275	CONSTRUCTION OF TUBEWELL
276	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
277	Drilling of 600/450 mm dia bore hole by DC Rig m/c complete with all required material, labour & T&P etc. complete.
278	600 mm dia Drilling from 0 to 60 M BGL
279	450 mm dia Drilling from 61 to 100 M BGL
280	450 mm dia Drilling from 101 to 165 M BGL
281	Logging of bore hole by departmental/approved electric logger.
282	TUBEWELL ASSEMBLY
283	M.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & as per typed design complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
284	300 mm dia
285	150mm dia
286	LOWERING OF ASSEMBLY
287	Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
288	300 mm dia size Assembly from 0 to 54 M BGL
289	150 mm dia size Assembly from 55 to 100 M BGL
290	150 mm dia size Assembly from 101 to 150 M BGL
291	PEA-GRAVEL
292	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed, Screened and properly Stacked at Site.
293	DEVELOPMENT OF TUBEWELL
294	By Air Compressor
295	Transportation, Erection & Dismantling of 250 PSI Air Compressor.
296	Development of T.W. by 250 PSI Air Compressor with all required material, labour, T&P etc.
297	By O.P. Unit
298	Transportation, Erection & Dismantling of 3 Cusec O.P. Unit and Yield Test.
299	Development of T.W. by 3 Cusec O.P. Unit with all required material, labour, T&P etc.
300	Yield test of tubewell along with chemical and bacteriological analysis of tubewell's water.
301	Pumping plant and Other instrumentation work
302	SITC of 800 LPM, 58 m head 20 H.P. submersible pump set with 24 meter column pipe(100mm dia) assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
303	SCADA Compatable chlorinating system
304	3M long heavy duty column pipe same as above (Extra/Spare)
305	40 KVA Servo Voltage stabilizer.
306	CE/UL Certified Intelligent Smart Energy Meter
307	Motor operated Actuator for with Sluice Valve of size upto 150 mm
308	CE/UL certified electromagnatics flow meter of 100 mm dia
309	Soft Stater with RS485Port- 400 V Class,
310	Auto Phase reversal unit with inbuilt time delay & enclosure (confirm to IEC: 60947-1 & IEC:60947-b-1
311	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
312	CE/UL Certified Pressure Transmiter .
313	Complete Cabling for Tubewell including all power & control cables of the equipment at pumphouse and OHT
314	SCADA OF AUTOMATION
315	SCADA AUTOMATION ITEMS
316	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification.
317	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
318	CE/UL Certified Surge protector for control panel
319	CE/UL certified 7\\" HMI touch screen suitable to communicate with PLC/RTU for local display & control of process parameters.
320	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
321	Installation, commissioing & testing for one tubewell
322	Trial Run for 3 month period for one tubewell
323	Instrumentation of OHT DMA-1
324	CE/UL Certified Radar type level Transmitter for OHT
325	Flow control Valve 400 mm size
326	Motor operated Actuator with Sluice valve 400mm Size
327	Electromagnetic Flowmeter of 400mm Size
328	CE / UL certified Pressure Transmitter
329	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
330	Instrumentation of OHT DMA-2
331	Flow control Valve 350 mm size
332	Motor operated Actuator with Sluice valve 350mm Size
333	Electromagnetic Flowmeter of 350mm Size
334	CE / UL certified Pressure Transmitter
335	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
336	3 Months Trial and Run
337	ZONE-IV ( 01 No Rebore Tubewell)
338	CONSTRUCTION OF TUBEWELL
339	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
340	Drilling of 500/450 mm dia bore hole by DC Rig m/c complete with all required material, labour & T&P etc. complete.
341	500 mm dia Drilling from 0 to 60 M BGL
342	450 mm dia Drilling from 61 to 100 M BGL
343	450 mm dia Drilling from 101 to 165 M BGL
344	Logging of bore hole by departmental/approved electric logger.
345	TUBEWELL ASSEMBLY
346	M.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & as per typed design complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
347	200 mm dia
348	150mm dia
349	LOWERING OF ASSEMBLY
350	Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
351	200 mm dia size Assembly from 0 to 54 M BGL
352	150 mm dia size Assembly from 55 to 100 M BGL
353	150 mm dia size Assembly from 101 to 150 M BGL
354	PEA-GRAVEL
355	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed, Screened and properly Stacked at Site.
356	DEVELOPMENT OF TUBEWELL
357	By Air Compressor
358	Transportation, Erection & Dismantling of 250 PSI Air Compressor.
359	Development of T.W. by 250 PSI Air Compressor with all required material, labour, T&P etc.
360	By O.P. Unit
361	Transportation, Erection & Dismantling of 3 Cusec O.P. Unit and Yield Test.
362	Development of T.W. by 3 Cusec O.P. Unit with all required material, labour, T&P etc.
363	Yield test of tubewell along with chemical and bacteriological analysis of tubewell's water.
364	Pumping plant and Other instrumentation work
365	SITC of 500 LPM, 53 m head 10 H.P. submersible pump set with 24 meter column pipe(80mm dia) assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
366	SCADA Compatable chlorinating system
367	3M long heavy duty column pipe same as above (Extra/Spare)
368	20 KVA Servo Voltage stabilizer.
369	CE/UL Certified Intelligent Smart Energy Meter
370	Motor operated Actuator for with Sluice Valve of size upto 100 mm
371	CE/UL certified electromagnatics flow meter of 80 mm dia
372	Soft Stater with RS485Port- 400 V Class,
373	Auto Phase reversal unit with inbuilt time delay & enclosure (confirm to IEC: 60947-1 & IEC:60947-b-1
374	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
375	CE/UL Certified Pressure Transmiter .
376	Complete Cabling for Tubewell including all power & control cables of the equipment at pumphouse and OHT
377	SCADA OF AUTOMATION
378	SCADA AUTOMATION ITEMS
379	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification.
380	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
381	CE/UL Certified Surge protector for control panel
382	CE/UL certified 7\\" HMI touch screen suitable to communicate with PLC/RTU for local display & control of process parameters.
383	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
384	Installation, commissioing & testing for one tubewell
385	Trial Run for 3 month period for one tubewell
386	Cable Laying for Rebore Tubewell
387	Supply of Aluminium conductor PVC insulated Armoured served sheathed cables 1100 volts grade. 2R x 3.5 Core x 25 sq. mm. (U.P. PWD S.O.R Year 2018 for electrical works Chapter 5-Item No 501(J)).
388	Cable laying from old pump house to Rebore tubewell of 25 sq. mm aluminium armoured cable. (U.P. PWD S.O.R Year 2018 for electrical works Chapter 5-Item No 501(J)).
389	Complete cabling for Tubewell including all power and control cables of all equipment at pump house.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 14(i))
390	Installation, commissioning and testing of SCADA Automation System at Rebore Tubewell.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 16).
391	Instrumentation of OHT
392	CE/UL Certified Radar type level Transmitter for OHT
393	Flow control Valve 140 mm size
394	Motor operated Actuator with Sluice valve 140mm Size
395	Electromagnetic Flowmeter of 140mm Size
396	CE / UL certified Pressure Transmitter
397	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
398	Three Month Trial & Run for 03 Month
399	ZONE-V
400	CONSTRUCTION OF TUBEWELL
401	Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.
402	Drilling of 600/500 mm dia bore hole by DC Rig m/c complete with all required material, labour & T&P etc. complete.
403	600 mm dia Drilling from 0 to 60 M BGL
404	500 mm dia Drilling from 61 to 100 M BGL
405	500 mm dia Drilling from 101 to 180 M BGL
406	Logging of bore hole by departmental/approved electric logger.
407	TUBEWELL ASSEMBLY
408	M.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & as per typed design complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
409	300 mm dia
410	200mm dia
411	LOWERING OF ASSEMBLY
412	Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. (Note-Axial Length of Reducer without Ring shall be measured with Casing Pipe.)
413	300 mm dia size Assembly from 0 to 54 M BGL
414	200 mm dia size Assembly from 55 to 100 M BGL
415	200 mm dia size Assembly from 101 to 165 M BGL
416	PEA-GRAVEL
417	Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed, Screened and properly Stacked at Site.
418	DEVELOPMENT OF TUBEWELL
419	By Air Compressor
420	Transportation, Erection & Dismantling of 250 PSI Air Compressor.
421	Development of T.W. by 250 PSI Air Compressor with all required material, labour, T&P etc.
422	By O.P. Unit
423	Transportation, Erection & Dismantling of 3 Cusec O.P. Unit and Yield Test.
424	Development of T.W. by 3 Cusec O.P. Unit with all required material, labour, T&P etc.
425	Yield test of tubewell along with chemical and bacteriological analysis of tubewell's water.
426	Pumping plant and Other instrumentation work
427	SITC of 1250 LPM, 60 m head 30 H.P. submersible pump set with 24 meter column pipe(150mm dia) assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.
428	SCADA Compatable chlorinating system
429	3M long heavy duty column pipe same as above (Extra/Spare)
430	50 KVA Servo Voltage stabilizer.
431	CE/UL Certified Intelligent Smart Energy Meter
432	Motor operated Actuator for with Sluice Valve of size 150 mm
433	CE/UL certified electromagnatics flow meter of 150 mm dia
434	Soft Stater with RS485Port- 400 V Class,
435	Auto Phase reversal unit with inbuilt time delay & enclosure (confirm to IEC: 60947-1 & IEC:60947-b-1
436	CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell
437	CE/UL Certified Pressure Transmiter .
438	Complete Cabling for Tubewell including all power & control cables of the equipment at pumphouse and OHT
439	SCADA AUTOMATION
440	SCADA AUTOMATION ITEMS
441	CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification.
442	G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.
443	CE/UL Certified Surge protector for control panel
444	CE/UL certified 7\\" HMI touch screen suitable to communicate with PLC/RTU for local display & control of process parameters.
445	Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).
446	Installation, commissioing & testing for one tubewell
447	Trial Run for 3 month period for one tubewell
448	Instrumentation of OHT (DMA-1)
449	CE/UL Certified Radar type level Transmitter for OHT
450	Flow control Valve 400 mm size
451	Motor operated Actuator with Sluice valve 400mm Size
452	Electromagnetic Flowmeter of 400mm Size
453	CE / UL certified Pressure Transmitter
454	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
455	Instrumentation of OHT (DMA-2)
456	Flow control Valve 350 mm size
457	Motor operated Actuator with Sluice valve 350mm Size
458	Electromagnetic Flowmeter of 350mm Size
459	CE / UL certified Pressure Transmitter
460	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
461	Instrumentation of OHT (DMA-3)
462	Flow control Valve 300 mm size
463	Motor operated Actuator with Sluice valve 300mm Size
464	Electromagnetic Flowmeter of 300mm Size
465	CE / UL certified Pressure Transmitter
466	Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency.ii- Single parameter system ready to operate to measure free or total chlorineiii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinnediv- Battery and other accessories for power back for continous operation.
467	Three Month Trial & Run for 03 Month Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Services Tenders

Civil Engineering Services Tenders

Soil Survey Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. For Construction, Erection, Completion, Testing & Commissioning Of Water Supply Works Such As Over Head Tank, Tube Well, Rising Main, Distribution System, Pump H, Chhitauni-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. For Construction, Erection, Completion, Testing & Commissioning Of Water Supply Works Such As Over Head Tank, Tube Well, Rising Main, Distribution System, Pump H, Chhitauni-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us