Tender for Tender for Construction Work Of Clock Tower And Park At The Old Bus Stand In Municipal Council Palia Kalan.
Tender Value
31.74 Lakhs
Estimated cost
Bid Submission
02 May 2026
0 days left
EMD
3.17 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palia → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Clock Tower And Park At The Old Bus Stand In Municipal Council Palia Kalan.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Apr-2026 | DATE CORRECTION | Date | 02-May-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation soil (Loam clay or sand) including lift upto 1.5 metre (5fts) and lead upto 30 Mtr (100fts) & including filling watering and ramming of excavated earth into the tremches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of suplus earth as directed Engineer in charge up to distance of 30m (100fts) from the foundation trenches. as per .DAR 2.8.1 |
| 2 | P/L Cement concrete with 1:6:12 (1 Cement, 6 Fine sand & 12 graded brick ballst aggregete 40 mm nominal size etc.) Sl. No. 273 |
| 3 | R.C.C. work with cement approved coarse sand & 3cm. (3/4\\") gauge approved stone ballast in propotion 1:1.5:3 in slab excluding supply of rainforcement & its bending the same with 24 B WG binding wire & nescessary centering & shuttring ete, & also including supply of all materials, labour & tools & plants etc required for proper completion of the work strength of the concrete shal not be less then M-150 S.I. No. DAR 5.2.2 |
| 4 | Mild steel in RCC [email protected]% of cc including all labour material, T&P etc completer as per direction of E/I.S.I. NO. 504 |
| 5 | Class M-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including material all labour and T&P etc. required for proper completion of work. As per DAR 6.1.1 |
| 6 | Class M-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including material all labour and T&P etc. required for proper completion of work. As per DAR 6.4.1 |
| 7 | Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters, windowsills, facias and similar locations of requered size, approved shade, colour and texture laid over 20mm thick base cement :sand), joints treated with white cement mixed with maching pigment epoxy touch ups, including rubbing curing moulding and polishing to edges to give high gloss finish etc. (As per DSR No8.2.2.2) |
| 8 | 12mm thick plaster with cement & C sand of 1.25F.M. mortar in 1:4 including supply of all materials, labour and T&P etc required for proper completion of work. DAR 13.4.1 |
| 9 | Marble work gang saw cut polished and prepolished machine cut for kitchen platforms vanity counters, windowsills, facias and similar locations of requered size, approved shade, colour and texture laid over 12mm thick base cement :sand), joints treated with white cement mixed with maching pigment epoxy touch ups, including rubbing curing moulding and polishing to edges to give high gloss finish etc. (As per DSR No8.1.1.2) |
| 10 | Providing edge moulding to 18 mm thick marble stone counters, 10 vanities etc including machine polishing to edge to give high gloss finish etc(As per DSR No8.3.2) |
| 11 | Extra for pre-finished noising to treads of steps of marble stone. DSR No11.24) |
| 12 | S/F of Stainless Steel Grill work all complete As per DAR 10.28 |
| 13 | S/F of M.S Fabrication work..DAR 10.2 |
| 14 | S/F of Watch with all Material and Labour all complete.. As per MR |
| 15 | Providing and laying in cement concrete 4:2:1 of not lesss than strenght of M 150 stone ballast (20 mm. Nominal size) 2 approved coarse sand: 1 cement including supply of all materials, labour and T & P etc. requires for proper completion of the work and curing complete including cost of from work in foundation and floors. as Per S.I. No. DAR 4.1.3 |
| 16 | Providing and laying of interlocking tiles of thickness 80mm as per 16 drawing and technical specification clause 1504 of MORD specification. |
| 17 | Grassig with selection no.1 including watering and maintance of the lawn for 30 days or more till the grass....etc MR |
| 18 | S/F of RCC Pre-Cast Bench...etc all Complete As per MR |
| 19 | S/F of Plantation Work...etc as per MR |
| 20 | Painting two coat synthetic enamel paint over and including priming coat on new steel or other metal/ wooden surface upto 10cm width or girth in small article not exceeding 0.10 sqm area after and including preparation of surface by throughly cleaning oil, grease, dirt and foreign matters and scored by wire brushes fan steel wood rapers and preparing and knotting including cost of all materials, labours, T&P etc required for proper Completion of the work DSR 13.99.1 |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR 13.80 |
| 22 | Distempering (Two coat with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J & N Shalimar. Asian paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials. (upto floor two level DSR 13.81.1+13.83.2 |
| 23 | S/F of Statue Work 2 Nos...etc all comp MR |
| 24 | Supply & Fixing of Stone Granite board Size 910x610x20mm with Fixing V Shape Letters(3'x2'.. Etc all comp… |
| 25 | Add Electrification @2% on |
| 26 | Add 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
May 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender