|
| 1 | Schedule 'A' |
| 2 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc |
| 3 | Taking down unservicable/partly unscrewing from boards/outlets light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes. |
| 4 | Material and labour for point wiring with 1.5 sqmm (nominal cross section area) single core PVC insulated unsheathed cable of 1100 Volts grade (FRLS) multistrand with copper conductor drawn through and including non metallic, rigid PVC conduit of adequate size with all fittings and conduit accessories concealed in wall/ceiling/floor/roof etc. including 2 mm thick modular box with modular cover plate and frame for housing the switches, socket outlets including provision of 1.5 sqmm green in colour PVC insulated copper conductor single core multistrand (FRLS) for earth continuity conductor and connected to common earth dolly all as specified for the following:- |
| 5 | One light point controlled by one, one way switch |
| 6 | One ceiling /exhaust fan point controlled by one switch and regulator |
| 7 | One 3 pin 5 amp socket out point on the same board with other switches. |
| 8 | One3 pin 5 amps socket out let point on independent board |
| 9 | One bell/buzzer point controlled by one bell push. |
| 10 | One light point controlled by two 2-way switches |
| 11 | All as per item No 3.00 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire. |
| 12 | All as per item No 3.00 above but for one socket outlet 15 amp on independent board with 4.0 Sq. mm cable and 4.0 Sq.mm. earth wire. |
| 13 | M&L for Repair/replacement of Switch piano flush type single pole one way 5 amps. |
| 14 | M&L for Repair/replacement Switch piano flush button type two way 5 amps. |
| 15 | M&L for Repair/replacement Socket out let 2 in one with cover plate, 5/3 pin 5Amp |
| 16 | M&L for Repair/replacement Modular switch 2 way 6A with cover plate, and box, 1 module all as specified and directed by EIC. |
| 17 | M&L for Repair/replacement Modular switch 1 way 6A with cover plate, and box, 1 module all as specified and directed by EIC. |
| 18 | M&L for Repair/replacement modular socket, Socket, 6A - 2/3 pin combined 2 module with cover and box, plate all as specified and directed by EIC. |
| 19 | M&L for Repair/replacement modular socket 16A - 2/3 pin combined 2 module with cover plate and box, all as specified and directed by EIC. |
| 20 | M&L for Repair/replacement Modular switch 1 way 16A, 1 module with cover plate and box all as specified and directed by EIC. |
| 21 | M&L for Repair/replacement Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type with pvc box universal make :Anchor . |
| 22 | M&L for Repair/replacement Switch socket combination 5 in 1, 5 pin 16 Amps flush type with pvc box universal Make : Anchor . |
| 23 | M&L for Repair/replacement Ceiling rose, surface bakelite 65x50 mm three terminal |
| 24 | M&L for Repair/replacement Call bell AC-230 Volt single pole ding dong |
| 25 | M&L for Repair/replacement Bell push, flush type 5 Amps. |
| 26 | M&L for Repair/replacement Modular bell push 6A, 1 module with cover plate all as specified and directed by EIC. |
| 27 | M&L for Repair/replacement Electronic Fan regulator 2 module 100/120 Watt step type |
| 28 | M&L for Repair/replacement Modular fan regulator120Watt, 2- module , AC 240 Volts complete. |
| 29 | M&L for Repair/replacement Lamp holder insulated body with back plate for angle holder all as per specified |
| 30 | M&L for Repair/replacement LED tube light fittings 1x20 Watt ,220V, AC decorative box type with driver,holder including LED Tube light connecting up with 3 core flexible cppper conductor cable with sutable size from ceiling rose complete all as directed by Engr-In-Charge. |
| 31 | M&L for Repair/replacement LED tube light fittings mirror type with high output diffuser 2 feet ,1x10 Watt ,220V, AC decorative box type with driver,holder including LED Tube light connecting up with 3 core flexible cppper conductor cable with sutable size from ceiling rose complete all as directed by Engr-In-Charge. |
| 32 | M&L for Repair/replacement Decorative light ftting, PVC body , oval in shape & LED lamp suitable for wall fitting including connecting up with 3 core flexible copper conductor cable with suItable size complete all as directed by Engr-In-Charge. Make : Havells or Equivalent |
| 33 | M&L for Repair/replacement Driver for garden LED 10 W light Crompton complete all as directed by Engr-In-Charge. |
| 34 | M&L for Repair/replacement LED post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light complete with IP65 protection with impact and corrosion resistant complete with driver and lamp etc all as directed by Engr-In-Charge. |
| 35 | M&L for Repair/replacement earth enclosure with 2 pin earth plug sokcet complete with MCB SP 25 amp,flush mounting type LEGRAND/ABB/L&T. |
| 36 | M&L for Repair/replacement triple pole and earth enclosure with a three pin and earth plug with sokcet complete with one triple pole MCB 32 Amp. |
| 37 | M&L for Repair/replacement triple pole and earth enclosure with a three pin and earth plug with sokcet complete with one triple pole MCB 63 Amp. |
| 38 | M&L in repair/ replacement for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 4 Sqmm, earth continuity conductor of size 4.0 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 25mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 4 sqmm and one wire of 4.0 sqmm and one run of PVC casing caping/Conduit shall be measured as one unit. |
| 39 | M&L in repair/ replacement for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Four wires of 6 sqmm and one wire of 6.0 sqmm and one run of PVC casing caping/Conduit shall be measured as one unit. |
| 40 | M&L in repair/ replacement for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable FRLSH 2 Single core of size 10 Sqmm, earth continuity conductor of size 10 Sqmm to be drawn through and including PVC CASING CAPING/PVC Conduit not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i) Two wires of 10sqmm and one wire of 10 sqmm and one run of PVC ccasing caping/Conduit shall be measured as one unit. |
| 41 | M&L for Repair/replacement ceiling fan blade set of 3 of 1200 mm/1400mm sweep size all as per specified and directed. |
| 42 | M&L for Repair/replacement clamps with rubber bush for holding 1200 mm/1400mm sweep size fan with fan rod all as per specified and directed. |
| 43 | M&L for Repair/replacement MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door |
| 44 | M&L for Repair/replacement MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection |
| 45 | M&L for Repair/replacement MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 240Volts SPN with 12 way Double door IP-43-IK09 protection grade Make : Legrand/L&T |
| 46 | M&L for Repair/replacement MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps |
| 47 | M&L for Repair/replacement MCB TP 415 Volts, 'C' series, breaking capacity 10 KA of rating 25 to 63 Amps |
| 48 | M&L for Repair/replacement MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps |
| 49 | M&L for Repair/replacement MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps |
| 50 | M&L for Repair/replacement MCB SP 240 Volts 'C' series, breaking capacity 10 KA of rating 6-32 Amps |
| 51 | M&L for Repair/replacement RCCB DP 100 mA of rating 6 A-25 Amps Model no. INDO ASIAN 811668 |
| 52 | M&L for Repair/replacement MCB DP upto 25 Amps rating type C Optipro : INDO ASHIAN Model no. 811170 |
| 53 | M&L for Repair/replacement MCCB TPN 63 Amps , 415Volts, 16 KA |
| 54 | M&L for Repair/replacement Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-5 of 1991 (part-I) |
| 55 | Taking down fan of any make/type/sweep,sealing cable end ,dismantling of blades and for repair /overhauling complete all as directed |
| 56 | M&L for Overhauling of ceiling fan /wall fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same including small screw and bolts, fixing and connecting on its existing position and testing on completion all as specified and as directed .(Note- (A) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (B) The spares (bearing , bush,capacitor,pin) required shall be measured and paid separately in the relevant items). |
| 57 | M&L for Rewinding of ceiling fan, segregation of unserviceable parts, cutting and removing out burnt copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spare parts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400 mm sweep fan (I) Split pin - 02 Nos (ii) Connection block - 1 No (iii) Insulation rubber bush. - 01 No |
| 58 | M&L for Painting of ceiling fan / Wall fan of any sweep complete including fan blade down rod with synthetic enamelled paint by spraying including cleaning and removing dust,dirt,oily particles by chemicals, making smooth surface for painting ,filling cavities with filler all as specified and directed. |
| 59 | Taking down exhaust fan, of any size and PVC, Mettalic any type for cleaning/servicing removing oil particles by chemicals and overhauling the same, refixing the same on its existing position and connection up. |
| 60 | M&L for Rewinding of exhaust fan 225 to 300 mm sweep, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spare parts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and including necessary transportion to workshop. |
| 61 | Supply only gun metal bush of any size |
| 62 | Supply only bearing for ceiling fan (Make - TATA/SKF No.6201/6202). |
| 63 | Supply only bearing for ceiling fan (Make - TATA/SKF No.6203/6204). |
| 64 | Supply only fan condensor 2.5 MFD (Make – EPCOS/USHA / UNIVERSAL). |
| 65 | Supply only fan condensor 4 MFD (Make – EPCOS/USHA / UNIVERSAL). |
| 66 | S&F canopy of ceiling fan bottom and upper side of size 1200/1400 |
| 67 | M&L for Wooden frame of suitable size and length for fixing of exhaust fan in existing hole including all nut/bolts complete all as specified and directed by Engineer-in-Charge. |
| 68 | M& L for opening the geyser 25/50 ltr capacity and taking out inner tank and glass wool from inside the geyser , descaling & washing with acid to remove the scales, dirt etc if any and refixing the same after reassembly into geyser and proper filling of new glass wool around inner tank complete all as specified & directed ( NOTE:- Glass wool will be measured & paid separately under relevant item of the schedule) |
| 69 | M&L for Repair/replacement of Glass wool pf any colour complete all as directed by Engineer-in-Charge |
| 70 | M&L for Repair/replacement of Geyser inner water storage tank of any type capacity 25 ltr make of metal stainless steel as specified and directed |
| 71 | M&L for Repair/replacement Fusible plug suitable for 25 Ltrs Cap storage type water heater including provn of necessary GI fittings removal of existing valves fixed in repair / replacement complete all as specified and directed. |
| 72 | M&L for Repair/replacement Heating element upto 2KW capacity of storage type water heater of triangle/ cup/compatible type (ISI Marked) including making all connections by replacing inter connecting copper conductor cables and removal of old unserviceable elements fixed in repair / replacement complete all as specified and directed. |
| 73 | M&L for Repair/replacement Thermostat suitable for 25/50 ltrs capacity storage type water heater including removal of old unserviceable ones fixed in repair / replacement complete all as specified and directed. |
| 74 | M&L for Repair/replacement Indicator lamp assembly complete for water heater (geyser) suitable to work on AC 230 volts supply and to match the existing size any type including disconnecting and fixed in repair / replacement complete all as specified and directed. |
| 75 | M&L for Repair/replacement Drain plug brass with washer suitable for 25 ltrs geysers fixed in repair / replacement complete all as specified and directed. |
| 76 | M&L for Repair/replacement Geyser heavy duty connecting pipe 600/450mm long made out of branded flexible pipe with brass female coupling for connecting geyser outlet to existing connecting point 15 mm dia fixed in repair / replacement complete all as specified and directed. |
| 77 | M&L for Repair/replacement anchor bolts/ Fastner 75mm long made out of stain less steel for proper fixing of geysers complete all as specified and directed |
| 78 | M&L for Repair/replacement PVC insulated and FR PVC Round Sheathed , copper conductor (flexible) industrial cable of size 1.5 Sqmm 3 core, 1100 volt, conforming to IS 694 complete all as specified and directed |
| 79 | M&L for Repair/replacement Thermosyphonic type solar water panel of size suitable for solar water heater capacity of 100 Ltr including taking out old unservicable panel after opening inlet/outlet connections by dismantling existing rusted /broken gate valve, GI/CPVC pipe and all connection and including descaling lines ,making functional after carrying out repairs/replacement including nut bolt, washer, welding work, including complete testing after installation fixed in repair / replacement complete all as specified and directed. Please Enable Macros to View BoQ information |
