|
| 1 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified |
| 2 | M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified |
| 3 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 4 | Demolition of concrete ( un reinforced ) in ground floors and paving n.exc 15 cm thk (below or above ground level) complete all as specified and directed. |
| 5 | M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair complete all as specified and directed. |
| 6 | M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified. |
| 7 | M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified. |
| 8 | M& L Chequared Cement Concrete Tiles (Glozy Finish) 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 9 | Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified. |
| 10 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified |
| 11 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified |
| 12 | M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls complete all as specified and Directed by Engr-in-Charge. |
| 13 | M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper over a coat of primer on walls complete all as specified and Directed by Engr-in-Charge. |
| 14 | M & L for Complete removal of existing treatment of surface finish on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3 mm thick) and applying one coat of primer with two coat of oil bound distemper complete all as specified. |
| 15 | Complete removal of existing treatment from old decorated surfaces of wall ,preparation of surfaces,priming with alkali resistant priming paint and applying two coat of cement base paint complete all as specified & directed by Engineer-in-Charge. |
| 16 | M & L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper complete all as specified. |
| 17 | Material and labour for complete removal of existing treatment of plastered OR unplastered old decorated surface walls by brooming down and applying two coats of weather proof paint on external surfaces including a coat of acrylic based primer at any height of building / tower complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M & L for Preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of tint approved by Engr-in-charge complete all as specified. |
| 19 | M & L for Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth ,including roof and applying one coat of synthetic enamel paint of tint approved by Engr-in-charge complete all as specified. |
| 20 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 21 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified. |
| 22 | M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete. |
| 23 | Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, rounding to edges of granite stone over screed bed for floor finishes or on vertical surface 10 mm thick backing coat etc.complete all as specified and directed. |
| 24 | Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed. |
| 25 | M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified. |
| 26 | M&L for vitrified coloured tiles 8 to 10 mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed. |
| 27 | All as per item No 26 but on skirting over 8 to 10 mm th rendering in CM 1:4 complete all as specified and directed. |
| 28 | M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 29 | Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm. |
| 30 | All as per item No. 29 above but bore of pipe 20mm |
| 31 | M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm concealed complete all as specified and directed by Engr-in-Charge |
| 32 | All as per item No. 31 above but bore of pipe 20mm |
| 33 | Refixing old steel tubing and connections in new or old position (wall, ceiling, floor etc) 15mm bore concealed complete all as specified and directed by Engr-in-Charge |
| 34 | All as per item No. 33 above but bore of pipe 20 mm |
| 35 | M&L Supplying and laying of 16 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified |
| 36 | M&L Supplying and laying of 20 mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches concealed complete all as specified |
| 37 | S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe concealed complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe concealed complete all as specified . |
| 39 | S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified |
| 40 | S&F in repair 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed concealed complete all as specified . (Make: Prayag/Shakti) |
| 41 | Supply only in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge |
| 42 | Supply only in repair 15 mm Brass CP Wall Mixer of standard quality for mixing hot & cold water screwed down for iron pipe and fixed concealed complete all as specified .(Make-cera/Shakti/Prayag) |
| 43 | S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified. |
| 44 | S&F in repairs Grating round 140 mm size of PTMT (Minimum weight 50gms.) |
| 45 | Dismantling of PVC water tank of capacity exc 500 litre and n. exc 1000 litre and complete all as specified and directed. |
| 46 | Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed. |
| 47 | S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes. |
| 48 | All as per item No. 47 above but 1000 litres. |
| 49 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr , etc. complete all as specified and as directed. |
| 50 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltr , etc. complete all as specified and as directed. |
| 51 | Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store. |
| 52 | All as per item No 51, but n'exc 1.5 Sqm each. |
| 53 | Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed. |
| 54 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing |
| 55 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 56 | S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides |
| 57 | S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. |
| 58 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm. |
| 59 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. |
| 60 | Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick. Please Enable Macros to View BoQ information |
| 61 | Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick. Please Enable Macros to View BoQ information |
