|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.(A) All kind of soil. |
| 2 | C) Ordinary rock |
| 3 | C) Hard rock |
| 4 | Earth work in excavation by mechanical means(Hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kind of soil |
| 5 | B) Ordinary rock |
| 6 | Stone Soling Dumping of stone including cost of stone (in horizontal on level). |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size deived. |
| 8 | Providing and laying cement concrete in retaining walls, return walls, walls ( anythickness) including attached pilasters,columns, piers, abutments, pillars,posts,struts,buttresses, string or lacing courses,, parapets, copings, bed blocks, anchors blocks, plain windows sills, fillets etc up to floor V level, including curing but excluding the cost of centering, shuttering and finishing with 1:3:6 ( 1cement :3 coarse sand :6 graded stone aggregate 20mm nominals size). |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centring and shuttering including strutting ,propping etc and removal of form for retaining walls, walls ( anythickness) including attached pilasters,butrrresses , plinth and string courses fillets, kerbs and steps etc. |
| 12 | Centering and shuttering including shuttering propping etc and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Centering and shuttering including shuttering propping etc and removal of form for Suspended floors, roofs, landings, balconies and assess plate forms. |
| 14 | Centering and shuttering including shuttering propping etc and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 15 | Providing and fixing/hoisting cement concrete solid blocks in 1:4 up to floor five level including hoisting and setting in position in mud mortar using approved quality mud with carriage of materials complete 1:3:6 ( 1cement :3 coarse sand :6 stone aggreagte 20mm nominals size). |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) second class deodar wood. inculing window glass with all complte job. |
| 17 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows,(area of opening for panel insert excluding portion inside grooves or rebated to measured) Panelling for panelled and glazed shutters 25mm to 40mm thick: Prelaminated with decorative lamination on both side exterior Grade -1 MDF Board 12 mm thick confirming to IS:14587. 25mm thick second class deodar wood |
| 18 | 12mm thick cement plaster finished with a floating coat of neat cement of mix 1:4 ( 1cement :4 coarse sand) |
| 19 | Providing wood work in frames of walls, false ceiling , partitions etc sawn and fixed in position :Budloo/fire wood (Note :False celing Design should be as per engineer in charge which may be of different level celing complete. |
| 20 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete Brand-Rait Wood. |
| 21 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job |
| 22 | Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 havingdensity 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags place dove existing false ceiling and held inposition by fixed to wall with screw, rawel plug& washers and held in position by criss crossing GI wire complete. |
| 23 | Providing and fixing thermal insulation ceiling (underdeck insulation ) with Resin bonded fibre glass wool conforming IS:8183, density /24kg/ cum, 50mm thick wrapped in 200 Gvirgin polythene bags, fixed to ceiling with metalic cleats (50x50x3mm) @60 cm and wire mesh of 12.5mm x24 gauge wire mesh, for top most ceiling of building. |
| 24 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete 25mm thick Second class teak wood complete. |
| 25 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 26 | Distempering with Ist quality acrylic distemper ,having VOC ( Volatile Organic Compound) content less than 50 grams/ltr of oil bound washable distemper of approved brand and manufacture including applying additional coats wherever required to achieve to give an even shade and colour on New work (two or more coats). |
| 27 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Note: It should have Low or No VOC as per Green Building guidelines)New work (Two or more coats applied @1.43 litre /10 sqm .Over and including priming coats of exterior primer applied @0.90 litr/10sqm. (Note :It should have Low or No VOC as per Green Building guideline) |
| 28 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Note: It should have Low or No VOC as per Green Building Guideline). |
| 29 | Preparing newly prrimed wooden surface for painting by way of filling of putty sand parering rubbing complete. |
| 30 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.( Note : It should have Low or No VOC as per Green Building guidline). |
| 31 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including complete. |
| 32 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 33 | Providing and fixing 12mm thick playwood of approved brand and manufacutre including nail, scews and carriage complete. |
| 34 | Providing and fixing soil waste & vent pipe (A) PVC Pipe 110mm dia (10 feet Unit Length) |
| 35 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 36 | PVC Bend 110mm dia |
| 37 | PVC Bend 75mm dia |
| 38 | PVC Tee 110mm dia |
| 39 | PVC Tee 75mm dia |
| 40 | PVC Collar 110mm dia |
| 41 | PVC Collar 75mm dia |
| 42 | PVC trap 110mm dia |
| 43 | PVC trap 75mm dia |
| 44 | PVC Socket 110mm dia |
| 45 | PVC Socket 75mm dia |
| 46 | PVC door junction 110mm dia |
| 47 | PVC door junction 75mm dia |
| 48 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 49 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 50 | Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4\\",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge) |
| 51 | Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM)of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm > Rock Wool 50mm> Alumunium Duct Clading 0.46mm to 0.71mm) |
| 52 | Providing and Installation of PUF ( Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (Syntex or any Other Approved Breand) as per direction engineer incharge |
| 53 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge) |
| 54 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (Thickness to be specified by the manufacturer), of Ist quality conforming IS: 15622, of approved make laid on 20mm thick cement mortar 1:4 ( 1 Cement : Coarse sand), including grouting the joints with white cement and matching pigments etc complete. |
| 55 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge) |
| 56 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Orissa pattern white vitreous chaina W.C pan of size 580x440mm with integral type foot rests, JAGUAR/CERA/HINWARE make. |
| 57 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps JAGUAR/CERA/HINDWARE Make. |
| 58 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. Classical cylinderical door lock for room door of approved brand Godrej or equiivallent or as per engineer incharge. |
| 59 | All drop for room doors of approved brands or as per site Engineer -in- charge. |
| 60 | T-Bolt for doors of approved brand or as per site Engineer in charge. |
| 61 | Handles for doors of approved brand or as per Site Engineer in charge. |
| 62 | P/F CP brass toilet paper holder including cost of wodden,PVC,play etc. |
| 63 | Providing and fixing wall mount Liquid Soap Dispenser of approved brand etc. |
| 64 | 15mm C.P brass tap with elbow operation lever of approved brand and manufacture complete. |
| 65 | 15 mm C.P brass tap 2 in 1 tap of approved quality conforming to IS standrads complete. |
| 66 | 15 mm nominals bore C.P brass angle valve for basin mixer and geyser points of approved brand make conforming to IS: 8931. |
| 67 | 15mm C.P brass long body bib cock of approved quality conforming to IS marked standrads and weighing not less than 690 grams.complete. |
| 68 | C.P brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 69 | Single Lever shower Mixer with 3- way diverter Conceled Divertor for Bath and shower systems including all sorts of necessories (KOHLER/JAGUAR/CERA) complete. |
| 70 | Overhead Shower (Maze Overhead Shower)200x200mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including all accessories of approved quality conforming to IS Standards (KOHLER /JAGUAR/CERA) complete. |
| 71 | Providing and fixing PTMT tower rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangments of approved quality and colour. Complete. |
| 72 | 450mm long towel rail with total length of 495mm, 78mm wide and effiective height of 88mm, weighing no less than 170 gms. |
| 73 | Supply installation testing and commissioning of Exaunt Fan of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all fixture complete |
| 74 | Supply installations of Soap dish approved brand as per Engineer -in - charge complete. |
| 75 | 15 mm nominals bore of standard back type C.P brass close hole basin mixer pillar tap of approved quality and make ,weighing no less than 1.970 kg. complete. |
| 76 | 16mm nominals bore of standardcback type C.P brass close hole wll mixer pillar tap of approved quality and make, weighing not less than 1.970 kg complete. |
| 77 | High water pressure S.S geyser Connections pipe (2 feet long) of approved quality and make complete. |
| 78 | 16mm nominals bore of standardcback type C.P brass csink mixer of approved quality and make,weighing not less than 1.970 kg complete. |
| 79 | Providing and fixing SS locking grating (Jali) anti-cock roach complete. |
| 80 | 15mm C.P brass ABS Health Faucet Jet Spray with Hose and Holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA) |
| 81 | Supply installation testing and commissioning of Geyser 15ltr Capacity horizontally mounted of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all fixture complete |
| 82 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 83 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40mm thick with 20 mm nominal size stone aggregate. |
| 84 | Providing and fixing ladakhi wood carved Tukur Phakna over windows, doors and all openings including fixing in position, of approved design and polishing complete job. |
| 85 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:2:4 (1 cement : 2 coarse sand (Zone-III) including testing/ Recycled Concrete aggragate (RCA) up to 25% : 4 graded stone aggregate 20 mm nominal size) including Recycled Concrete Aggregate (RCA) up to 25% complete. |
| 86 | Supplying /installation of 5KWP Solar power plant with all accessories, Solar module minimum 550 WP monocrystalline,Mounting support , Battery bank, Tubular, Solar PCU,96V, 5KVA, Solar array Junction bos 41/P, Battery protection panel, Cables, earthang, intallation kit, Lightning arrestors etc all complete. |
| 87 | Supplying/installation of Centre AC plant/Central Heating system including testing and commisioning.for Minor OT,OPD and Pharmacy Romms complete. |
| 88 | CCTV System:- Supplying/ installation of IP based CCTV survellance for Indoor/Outdoor, including testing/ commisioning complete. |
| 89 | Supplying/installation of 200 litre Solar water heating system including testing/ commisioning complete. |
| 90 | Reinforced cement concrete work in footing, Pedestal ,Columns,beams, suspended floors ,roofs having slope up to 15* landing ,balconies ,shelves,chajjas,lintels, bands, plain, windows sills, staircase and spiral stair cases up to five level including curing but excluding the cost of centring shuttering, finishing and reinforcement with (1:1.5:3) 1 cement :1.5 coarse sand :3 graded stone aggregae 20mm nominals. size. |
| 91 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows Including ISI marked M.S pressed butt hings bright finished of required size with necessary screws, excluding panelling which will be paid for separately ,all complete as per direction of Engineer in charge 35mm thick shutter second class deodar wood complete. |
| 92 | Providing and fixing DGU Float glass 4mm thick glass pane (weighing not less than 10 kg/sqm) |
| 93 | Providing and fixing of finished brass hanging type floor door stopper with necessary screws etc complete job. |
| 94 | Providing and fixing stone slab with table rubbed,edges rounded and polished, of size 75x50cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 6mm nominals ) as per direction of Engineer-in- charge and finished smooth. |
| 95 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: |
| 96 | Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C Pan with ISI marked white solid seat and lid .JAGUAR/CERA/HINDWARE Make. |
| 97 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including paintingof fittings and cutting and making good the wallsand floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
| 98 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 99 | Supply installation testing and commissioning of Geyser 30ltr Capacity horizontally mounted of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete |
| 100 | 15 mm nominal bore C.P. brass long Angle cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 101 | Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge |
| 102 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gram/m2 |
| 103 | Providing of fabricated steel roofing truss, purlins, rafters, posts, plates ISA.65x65x6mm ,ISA.50x50x6mm, 40x40x6mm, ISMC 75mm ,65mm,50mm,Plates 8mm,10mm thick, weather boarding, eves boarding, valley angle etc. including cutting hoisting fixing in position and applying a priming two or more coat of approved steel priming/painting all work complete job. including launching of trusses |
| 104 | Drilling , instalation of 125 mm dia machine drilled solar submersible pump dual. Electrical / solar with 550 W solar modules including mounting structure complete testing and commsiioning. |
| 105 | Supplying / installation / erection of 30W Solar light with 100 W solar panel with Pole, battery complete in all fixtures. |
| 106 | Supplying and stacking of good earth at site including royalty and carriage upto 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 107 | Supplying and stackingat site dump manure fromBadli or other approved source,includingcarriageupto1 km manure measuredinstackswillbereducedby8%for payment) |
| 108 | Geassing with selection no 1, grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving. Including all sorts of carriage complete job. Please Enable Macros to View BoQ information |
