Tender For Supply, Installation, And Commissioning Of Roof Top Solar Power System At Saraswati Shishu Vidya Mandir, Bandhabahal, Under The Csr Works Of Lakhanpur Area, Mcl., Jharsuguda-Odisha
TDR : 54980921
Tender Notice
BOQ
9 Days Left
Jharsuguda
Odisha
Tender For Supply, Installation, And Commissioning Of Roof Top Solar Power System At Saraswati Shishu Vidya Mandir, Bandhabahal, Under The Csr Works Of Lakhanpur Area, Mcl.
Name of Work:- Supply, Installation, and Commissioning of Roof top Solar power System at Saraswati Shishu Vidya Mandir, Bandhabahal, under the CSR works of Lakhanpur Area, MCL.
Sl. No.
Item Description
1
Supply of Off-grid Solar Photovoltaic Power plant conformig to MNRE specifications consisting of 450Wp x 24 nos. (10.8KWp) of Mono crystalline silicon solar cells, 12 Volt, 200Ah x 10 nos. of Battery bank, 10KV MPPT Inverter (3 Phase), necessary protections, Lightning Arrestor, GI mountin structure of suitable strength & all other accessories as per requirement.
2
Installation, testing and commissioning for 10.8KWp system (Complete system including the civil and electrical requirement).
3
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
4
Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth-1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
5
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixingaccessories such as nuts, bolts, fasteners etc.).
6
Direction and Place Identification signs with size more than 0.9 sqm size board.Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800- 3 of specification. The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to ground by means of properly designed foundation with M15 grade concrete 450x450x600mm. The ACM sheet shall be fixed to the post with four minimum four number breakaway bolts.
7
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
