|
| 1 | \\" Estimate for Providing 3 Phase Power Supply with C.D of 153 KW/170 KVA load for CHC New building at village CHC Sanamasigam,Nabarangpur. |
| 2 | SCOPE OF THE WORK- 1. Construction of 11 KV line with 55 mm2 AAAC =0.15 Km (3 Spans) with 9 Mtr long PSC Pole. 2.Erection of 11 KV with 3CX70 mm2 XLPE Cable =0.04 Km(D.C i.e 0.02X2=0.04 Km)(From T.Pole to M.U) 3.Installation of 250 KVA 11/0.4 KV Plinth mounted Sub-station =01 No.4. Erection of three phase ,11 KV Line using 3CX70 mm2 11 KV XLPE Cable =0.04 Km (D.C i.e 0.02X2=0.04 Km )5. Installation of 11 KV DP for Metering Unit arrangement (10/5A) with Service Connection =01 No 6.Erection of three phase LT line with 3X95 +1X70+1X16 mm2 XLPE AB Cable=0.48 Km,7.Dismanting of 11 KV line =0.15 Km(3 Spans). |
| 3 | PART-I(Estimate for Erection of 11KV New Line Using 3Cx70 mm2 11KV XLPE Cable=40 Mtr(20 Mtr X2 Run) & Erection of 11 KV Line using 55 Sq mm AAAC Conductor with 9 Mtr Long PSC Pole =0.15 CKm). |
| 4 | S/F of 9 Mtr long 300 Kg PSC Pole. |
| 5 | S/F of RCC Base Plate . |
| 6 | S/F of Earthing for Support(Coil type). |
| 7 | S/F of No-8 GI Wire (Dia 4.6 mm) 0.131 Kg/Mtr -2 Mtr for connecting pole with Coil earthing. |
| 8 | S/F of 11KV V Cross arm(10.2 Kg each). |
| 9 | S/F of GI Back clamp for 'V' Cross Arm(0.85 Kg each) |
| 10 | S/F of 11 KV F Clamp 2.9 Kg. |
| 11 | S/F of Top Bracket 100X50 mm MS Channel (02 Kg each). |
| 12 | S/F of Disc insulator(B&S)70 KN Polymer. |
| 13 | S/F of Hard Ware fitting (B&S) 70 KN (3 bolted). |
| 14 | S/F of 11 KV Pin Insulator polymer |
| 15 | S/F of 55 mm2 All Alloy Aluminium Conductor AAAC. |
| 16 | S/F of PG Clamp for 55 mm2 AAAC. |
| 17 | S/F of 100X50X6 mm Channel for Straight Cross arm 1.2 mtr Long for Bottom Channel &0.206 Mtr Long for Top Channel. |
| 18 | S/F of 3C X70 mm2 11 KV XLPE Cable (Armoured),A2XFY. |
| 19 | S/F of 7/12 SWG GI Wire for supporting of XLPE Cable. |
| 20 | S/F of Heat Shrinkable jointing kit for 3C X70 mm2 11 KV XLPE Cable (Outdoor type). |
| 21 | S/F of 7/12 SWG GI Wire for supporting of XLPE Cable. |
| 22 | S/F of Pole Clamp for Eye hook for XLPE Cable. |
| 23 | S/F of Eye hook for XLPE Cable. |
| 24 | S/F of Conductor dead end clamp suitable for bare massenger XLPE Aerial Bunched Cable (25-70 mm) |
| 25 | S/F of Lightning Arrester(12KV,10KA) Station Class |
| 26 | S/F of Straight Cross arm Channel of 100 X 50 X6 mm ,9.2 Kg/Mtr ,Each Channel length of 1.3 Mtr ,Rs 10.00 added for Galvanization for Fixing LA. |
| 27 | S/F of HT Stay Set (Complete) |
| 28 | S/F of Stay insulator. |
| 29 | S/F of Stay Clamp. |
| 30 | S/F of 7/8 SWG G.I Stay wire. |
| 31 | S/F of GI Pipe Earthing 40 mm dia medium gauge 3 mtr long for XLPE Cable & LA . |
| 32 | S/F of 25 X 4 mm GI Flat for earthing of XLPE Cable. |
| 33 | S/F of GI Nuts,bolts and washers of different Sizes. |
| 34 | S/F of Danger Board |
| 35 | S/F of Back Clamp for Danger Board. |
| 36 | S/F of ANTICLIMBING DEVICE /Barbed wire (3 KG per support). |
| 37 | S/F of Back Clamp for ACD. |
| 38 | S/F of Fish Plate for Supporting LA(50 X8 mm of Flat,0.97Kg/Mtr & 0.28 Mtr Long for Each). |
| 39 | Sundries. |
| 40 | Civil Work |
| 41 | Concreting of support with C.C . 1: 1.5:3 for 9 Mtr /10 Mtr PSC Pole=0.375 Cum |
| 42 | Couping with 1:1.5:3 for Poles=0.1125 Cum. |
| 43 | Cement Concreting for stud pole/Stay anchor plate with C.C 1:1.2:4 as per TPSODL Specification and drawing =0.2 Cum |
| 44 | Material for earthing including masonary work for earth pit and cement plate cover including salt,Charcoal etc (L) |
| 45 | Part-II(Estimate for installation of 01 Nos 11 KV Metering Unit DP ) |
| 46 | S/F of 9 Mtr long 300 Kg PSC Pole. |
| 47 | S/F of Earthing for Support(Coil type). |
| 48 | S/F of No-8 GI Wire (Dia 4.6 mm) 0.131 Kg/Mtr -2 Mtr for connecting pole with Coil earthing. |
| 49 | S/F of RCC Base Plate . |
| 50 | S/F of Pressure channel 100 x50 x6 mm,(2.8M x2 Pc)(9.2 Kg /mtr )Rs. 10.00 added for Galvanization. |
| 51 | S/F of Metering Unit mounting channel 100 x50 x6 mm ,2.8 mtr long 2 nos (9.2 Kg/mtr )Rs. 10.00 added for Galvanization. |
| 52 | S/F of Double Pole Belting Channel 75 x40 x4.8 mm ,6.8Kg/mtr ,each channel length of 2.8 Mtr ,02 Nos Channel Required Rs. 10.00 added for Galvanization. |
| 53 | S/F of Cross Bracing Angel of 50 x50 x6 mm ,3.5 mtr long 2 nos.(4.5 Kg/mtr) Rs.10.00 added for Galvanization. |
| 54 | S/F of Disc insulator(B&S)70 KN Polymer. |
| 55 | S/F of H W fitting (B&S) 70 KN (3 bolted). |
| 56 | S/F of HT Stay Set (Complete) |
| 57 | S/F of Stay insulator. |
| 58 | S/F of Stay Clamp. |
| 59 | S/F of 7/8 SWG G.I Stay wire. |
| 60 | S/F of GI Pipe Earthing 40 mm dia medium gauge 3 mtr long for DP . |
| 61 | S/F of GI Flat 25 X 6 mm for earthing . |
| 62 | S/F of GI Nuts,bolts and washers of different Sizes. |
| 63 | S/F of Lightning Arrester(12KV,10KA) Station Class |
| 64 | S/F of Danger Board |
| 65 | S/F of Back Clamp for Danger Board Plate 25x3 mm flat,0.59 Kg/Mtr Flat of 0.510 mtr length. |
| 66 | S/F of ANTICLIMBING DEVICE /Barbed wire (3 KG per support). |
| 67 | S/F of Back clamp for anticlimbing device 25 X3 mm flat ,0.59 kg/mtr Flat of 0.510 mtr length 4 nos.=(4x 0.59x0.510). |
| 68 | S/F of Fish Plate for Supporting LA(50 X8 mm of Flat,0.97Kg/Mtr & 0.28 Mtr Long for Each). |
| 69 | Sundries |
| 70 | CIVIL ITEMS |
| 71 | Cement Concreting for Stay anchor plate with C.C 1:1.2:4 ,0.2 Cum @ 6648.85/- |
| 72 | Concreting of support with C.C . 1: 1.5:3 for 9 Mtr /10 Mtr PSC Pole=0.375 Cum @6648.55/- |
| 73 | Couping with 1:1.5:3 for Poles=0.1125 [email protected]/- |
| 74 | Material for earthing including masonary work for earth pit and cement plate cover including salt,Charcoal etc (L) |
| 75 | PART-III(Estimate of Plinth mounted 11/0.4 KV ,250 KVA S/S With Bricks boundry & MS Iron grill gate ) |
| 76 | S/F of 9 Mtr long 300 Kg PSC Pole. |
| 77 | S/F of Rcc Base Plate |
| 78 | S/F of Pressure channel 100X50X6mm,2.8mtr 2 Nos with Galvanisation charges |
| 79 | S/F of AB Switch & HG fuse mounting channel 75X40X6 mm,2.8mtr.Long 4 Nos.(6.8Kg/mtr) with Galvanisation charges |
| 80 | S/F of Cantilever channel for supporting HG fuse 75X40X6mm MS Angle 1 mtr.Long 2 Nos.(6.8Kg/mtr) with Galvanisation charges |
| 81 | S/F of Angle for cantilever arrangement for HG fuse 50X50X6mm 2mtr long each,2Nos(4.5Kg/Mtr)with Galvanisation charges |
| 82 | S/F of Angle for mounting of LT distribution box 50X50X6mm 3mtr long each,(4.5Kg/Mtr) with Galvanisation charges |
| 83 | S/F of Channel for AB Switch Handle 75X40X6 mm,1 Mtr.Long 1 No.(6.8Kg/mtr) with Galvanisation charges |
| 84 | S/F of Disc insulator(B&S) 45KN Polymer |
| 85 | S/F of Hardware fitting (B&S) 45KN |
| 86 | S/F of 11 KV Pin Insulator polymer |
| 87 | S/F of 11KV AB switch 3 Pole,400A |
| 88 | S/F of 11KV HG fuse 3 Pole,400A |
| 89 | S/F of Lightning Arrester(9KV,10KA) Station Class |
| 90 | S/F of PG clamp for 55 mm2 AAA conductor |
| 91 | External panel |
| 92 | Supply, installation, testing and commissioning of cubicle type sectionalised, front operated bottom entry dust and vermin proof( IP65)M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required. |
| 93 | Busbar -630A AL busbar with SC rating of 36KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply. |
| 94 | One (1)-Incomer feeders each consisting of |
| 95 | One (1) -MAIN PANEL with 630A 4P MCCB 36KA Cat No-422008 -1 No as incomer with 500 A Control fuse and panel stand,VAF Digital Meter along with RYB indicator as per direction engineer in charge. (Make-Legrand /L&T/Schneider) |
| 96 | S/F of 1Cx150 mm2 LT XLPE Cable (Armoured) |
| 97 | S/F of 250 KVA,11/0.4KV(AL)Transformer with tap change, BIS Energy Level-II |
| 98 | S/F of G.I Pipe Earthing 40mm Dia medium gauge 3mtr long for Earthing device |
| 99 | S/F of GI Flat(25x6mm) for Neutral,body Earting of DTR & other accessories of DTR |
| 100 | S/F of GI Bolts,Nuts & washers |
| 101 | S/F of Earthing for Supports(Coil type) |
| 102 | S/F of No.6 G.I wire for earthing |
| 103 | S/F of Danger Board |
| 104 | S/F of Back Clamp for Danger Board. |
| 105 | S/F of ANTICLIMBING DEVICE / Barbed wire(3 KG per supprot) |
| 106 | S/F of Back Clamp for ACD. |
| 107 | S/F of Fish Plate for LA Fixing (50x8mm of Flat,0.97Kg/Mtr & 0.28Mtr Long for Each) |
| 108 | S/F of HT Stay Set (Complete) REC Construction standard |
| 109 | S/F of HT Stay Insulator Type-C |
| 110 | S/F of Stay Clamp(1.9 Kg /pair) |
| 111 | S/F of 7/10 G.I.Stay Wire(Grade-2) |
| 112 | Sundries (Paint,AI Binding tape,wire insulating tape,Clamp connector,Jumpering materials,Socket & other accessories etc. |
| 113 | Civil Works |
| 114 | Concreting of support C.C .1:1.5:3(I) |
| 115 | Couping with C.C, 1:1.5:3(J) |
| 116 | Material for earthing including masonary work for earth pit and cement plate cover including salt,Charcoal etc (K) |
| 117 | Cement Concreting for stud pole/Stay anchor plate with C.C 1:3:6(L) |
| 118 | Construction of brick bounday wall fencing with sand and metal Spreading |
| 119 | Brick boundary wall for fencing ,sand Filling ,Spreading of Aggregate & also including Fixing of MS Grill Gate. |
| 120 | PART-IV(Estimate for Erection of 11 KV New Line using 3C X70 mm2 11KV XLPE Cable=40 Mtr(20 Mtr x2 Run). |
| 121 | S/F of 3C X70 mm2 11 KV XLPE Cable (Armoured),A2XFY. |
| 122 | S/F of 7/12 SWG GI Wire for supporting of XLPE Cable. |
| 123 | S/F of Heat Shrinkable jointing kit for 3C X70 mm2 11 KV XLPE Cable (Outdoor type). |
| 124 | S/F of 7/12 SWG GI Wire for supporting of XLPE Cable. |
| 125 | S/F of Pole Clamp for Eye hook for XLPE Cable. |
| 126 | S/F of Eye hook for XLPE Cable. |
| 127 | S/F of Conductor dead end clamp suitable for bare massenger XLPE Aerial Bunched Cable (25-70 mm) |
| 128 | S/F of Lightning Arrester(12KV,10KA) Station Class |
| 129 | S/F of Straight Cross arm Channel of 100 X 50 X6 mm ,9.2 Kg/Mtr ,Each Channel length of 1.3 Mtr ,Rs 10.00 added for Galvanization for Fixing LA. |
| 130 | S/F of GI Pipe Earthing 40 mm dia medium gauge 3 mtr long for DP . |
| 131 | S/F of GI Flat 25 X 6 mm for earthing . |
| 132 | S/F of GI Nuts,bolts and washers of different Sizes. |
| 133 | S/F of Fish Plate for Supporting LA(50 X8 mm of Flat,0.97Kg/Mtr & 0.28 Mtr Long for Each). |
| 134 | Sundries |
| 135 | Civil Work |
| 136 | Material for earthing including masonary work for earth pit and cement plate cover including salt,Charcoal etc (L) |
| 137 | Part -V, Estimate for Erection of LT line with (3*95+1*70+1*16) mm sqr XLPE AB Cable=0.48 Km. |
| 138 | S/F of 116X100 mm GI RS joist (09 Mtr long) 23.0 Kg/Mtr (Each 207 Kg). |
| 139 | S/F of GI Base Plate. |
| 140 | S/F of Earthing device Coil type(GI). |
| 141 | S/F of No-8 GI Wire (Dia 4.6 mm )0.131 KG /Mtr.-2 Mtr.Connecting pole with Coil earthing. |
| 142 | S/F of Pole Clamp . |
| 143 | S/F of Dead end clamp I hook |
| 144 | S/F of Suspension clamp I Hook. |
| 145 | S/F of L.T stay set insulator. |
| 146 | S/F of L.T stay clamp. |
| 147 | S/F of 7/12 G.I. stay wire. |
| 148 | S/F of GI Bolt Nut& washer. |
| 149 | S/F of ( 3X95+1X70 +1X16 ) mm2 LT XLPE Aerial .Bunched cable. |
| 150 | S/F of Danger Board |
| 151 | S/F of Back Clamp for Danger Board |
| 152 | S/F of Anticlimbing device/Barbed wire (3 KG per support) |
| 153 | S/F of Back Clamp for ACD. |
| 154 | S/F of Black Paint. |
| 155 | S/F of Yellow Paint. |
| 156 | S/F of Sundries & minor materials. |
| 157 | CIVIL ITEMS |
| 158 | Concrete material for stay anchor plate (0.45x0.45x1.5)mtr |
| 159 | Concreting ratio 1:1.5:3 (500mm X500 mmX1500mm)=0.375 Cu mtr. |
| 160 | Couping ratio 1:1.5:3 with dimension (500 X 500 X450)=0.1125 Cu mtr. |
| 161 | Part-VI(Dismantling Charges for old materials & Shifting Charges). |
| 162 | Dismantling Charges of existing HT lines. |
| 163 | Dismantling Charges of existing HT Poles. Please Enable Macros to View BoQ information |
