|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil |
| 2 | M & L Hardcore broken stoneof gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 3 | M&L for plain Cement concrete1:4;8 type D2 using 40 mm graded stone as aggregate in foundations, filling and mass concrete |
| 4 | M&L for precast solid block masonary 1:3:6 (type C1) straight or curved on plan exc 6m mean radius, exc 10 cm width and set in CM (1:6) etc complete all as specified gradaint camber complete all as specified and directed |
| 5 | M&L of RCC work type B1 1:2:4 (20mm graded stone Aggregate) Beams, cantilevers, lintels over 1.5m span as directed complete |
| 6 | M&L Providing precast cement concrete cover slab type B1 1:2:4 (20mm graded stone Aggregate) (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete |
| 7 | M&L Mild steel CRS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips of Fe 410 W (Gde E250) quality A or Fe 290 (Gde-E-165) |
| 8 | M&L rendering 15 mm thick in CM 1 : 4 on fair faces of concrete, brick surfaces/block masonary etc including finishing the surfaces even and smooth without using extra cement all as specified & directed by Engr in Charge |
| 9 | M&L for Formwork to sides and soffits of beam, lintels,cantilevers , shelves rough concrete surface of concrete. |
| 10 | S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , laid in trenches or in floors complete all as specified and as directed. |
| 11 | S&F 110 mm dia bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 12 | S&F PVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 13 | S&F PVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 14 | S&F grating doom grating doom 100 mm dia with waste hole of PTMT (Minimum weight 25 gms) complete all as specified and directed. |
| 15 | M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 16 | Taking up or down steel tubing and connection incl cleaning for refixing of the following bore of pipe |
| 17 | 15mm bore of pipe |
| 18 | 20mm bore of pipe |
| 19 | S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: |
| 20 | 20mm nominal dia of pipes |
| 21 | 25mm nominal dia of pipes |
| 22 | S & F in repairs 15 mm size bib taps with long shank (consealed type), cast copper alloy chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 23 | S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed. |
| 24 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. |
| 25 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soils |
| 26 | M & L 25mm thick Sand filling under floors or in foundations including watering and solidation, laid dry over PCC laying interlocking tiles complete all as specified. |
| 27 | M & L for Machine pressed precast concrete interlocking paver block of approved shape and size 60mm thickness, with minimum compressive strength of 35 N/Sqmm (M-35 Grade) without correctin factor for chamfering , made in rubber moulds with 0.5mm thick scratch proof lacquer coating on top surface , with white cement and pigment laid over , confirming to IS 15658-2006 complete all as specified and directed. |
| 28 | Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:3:6 type C-1 using 20 mm graded stone aggregate, n exc 100 mm in width & set in CM 1:4 complete all as specified and directed. |
| 29 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, Including removal of debries out side MD land complete all as specified and directed by Engrin Charge. |
| 30 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. |
| 31 | M&L for 25 mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete. |
| 32 | M&L joint free (edge cut) light shade colour vitrified ceramic tiles 10mm thick (square/rectangular ) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 33 | M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished area of each tile exc 0.11 Sqm but n. exc 0.18 sqm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 34 | M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 35 | M&L 20mm thick granite (of any type) work (table rubbed and polished) over cooking platforms, WHB stand and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment of match with shade of granite, including demolition/taking down of existing granite complete all as specified and directed. |
| 36 | S&F sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cementmortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm complete all as specified and directed. |
| 37 | M&L for Powder coated aluminium window/ventilators with double side hung shutter for glazing and gauging and frame with one or more rebates made out anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised alumium fittings such as stay, hinges glazing with 5.0 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm apperture except fixed glazinng (FG) all as specified and directed. (Tint of glass shall be approved by GE ,5mm thick glass sheet glass or tinted glass appx 0.70 Sqm And wiremesh appx 0.70 Sqm included in this item). Size of section for Window frame 100mm X 45mm and 1.20mm thick Size of section for Glass shutter 85mm X 45mm and 1.20mm thick Size of section for wiremesh shutter 40mm x18 mm and 1.20mm thick |
| 38 | Demolition of brick work, block masonary or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land. |
| 39 | M&L for precast solid block masonary 1:3:6 (type C1) straight or curved on plan exc 6m mean radius, exc 10 cm width and set in CM (1:6) etc complete all as specified gradaint camber complete all as specified and directed |
| 40 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra lime or cement) |
| 41 | M&L for Formwork to sides and soffits of beam, lintels,cantilevers , shelves rough concrete surface of concrete. |
| 42 | M&L Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) 100mm thick as directed by Engg-in-charge |
| 43 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debris to a distance exc 1.5 Km but not exc 5.0 Km all specified and directed. |
| 44 | M&L for prepation of plastered surface of wall and applying two coats of Distemper oil emulsion over one coat of primer, after application of cement base wall cear putty all as specified & directed. |
| 45 | M&L for preparing new plaster surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm all as per manufacturers instructions and directed including 10m height steel scaffolding complete all as specified by GE/Engineer-in-Charge Make : Asian Paint Apex, Berger weather coat or equivalent |
| 46 | Returning filling in trenches incl spreading,levelling , watering& well ramming in layers n.exc 25 CM thick complete all as specified and directed |
| 47 | M&L for PCC (1:3:6) Type B1 (using 20 mm graded stone aggregate ) in coping of including necessary form work finished fair and even surface without using extra cement including weathering slightly rounded or chamfered angles and throating complete all as specified and directed |
| 48 | M&L for providing cement concrete type C-2, 1:3:6 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed |
| 49 | M&L for forming fair finished drain or channel 50 CM in girth in CM concrete using extra cement in cl form moulds complete all as specified and directed |
| 50 | M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested complete for pipe of 300mm bore complete all as specified and directed |
| 51 | M&L 300mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 52 | M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 50mm thick (measured solid), including all mouldings but excluding frame |
| 53 | M&L for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, plinth beam etc. Rough finished surfaces of concrete flat |
| 54 | M&L for Form work to sides of pillars, posts and columns all as specified and directed by Engineer-in-Charge. |
| 55 | M&L for RCC M-25 design mix in columns, pillars etc all as specified and directed by Engineer-in-Charge. |
| 56 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality |
| 57 | M&L Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface. |
| 58 | Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed |
| 59 | M&L for two coats of paints of approved shade(terracotta colour) on new or treated surface with admixture of pigment of match with shade over a coat of primer complete all as specified and directed. |
| 60 | M&L for fountain made of white marble having size 3.0 m diametre and water tank wall height 0.45 m from base plate thickness of wall shall be 60 mm thick ,base plate dia dia and 40 mm thick of marble above 100 mm thick PCC 1:2:4 & 4 balusters (bhaja) of size 0.40 x 0.40 x 0.4 intricate design.Vertical member of fountain 2.80 m tall having 0.90 sqm,0.80 sqm and 0.50 sqm area 40 mm thick of each flower shape art work of marble on verticle member of fountain incl sprinkler at top side of fountain . Art work design & pattern as per approved by GE water supply pipe 15 mm dia GI 4 m length and 20 mm pipe GI 12 m length incl laying underground wall etc and 1 HP motor/pump for water supplyincl cable and conduit lighterning arrangement 4 Nos.Laser light with concealed & wiring water proof all transportation & installation includedcomplete all as specified & directed Please Enable Macros to View BoQ information |
