|
| 1 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed |
| 2 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework and precast concrete articles and precast concrete block walling complete all as specified and as directed by by Engr-in-charge. |
| 3 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed |
| 4 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 5 | Preparation of new plastered surfaces of walls Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed |
| 6 | M&L Rendering 10 mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 7 | M&L Preparation of new plastered surfaces of walls and applying two coat of OBD white or tinted on walls over a coat of chalk whiting on plastered surfaces ,preparatory to distempering complete all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 9 | Taking down shutter exc 1 sqm and n.exc 2 sqm each and refixing in same opening all as specified & directed. |
| 10 | Taking down shutter exc 2 sqm each and refixing in same opening all as specified & directed. |
| 11 | Demolition cement concrete ( unreinforced) of ground floors and paving n exc 15 cm thickness(below or above ground floor) all as specified & directed. |
| 12 | M&L 75 mm thick Cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in floor complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L Cement concrete type B-2, 1::2:4 (20 mm graded aggregate) as in floor complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by by Engr-in-charge. |
| 15 | M&L for Vitrified tiles light shade 8-10 mm thick (square/ ectangular) polished, area of each tiles exceeding 595mm X 595mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to laying over & including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 16 | M&L for Virified Ceramic tiles light shade 8-10 mm thick (square/ ectangular) polished, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to laying over & 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed. |
| 17 | M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles 400mm X 400mm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match all as specified & directed laying over & including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 18 | M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) in skirting etc set and joined in neat cement slurry and pointed in white or .coloured cement to match all as specified & directed laying over & including 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed. |
| 19 | M&L glazed, coloured, ceramic, tiles of size (450mm x 300 mm) x 6 to 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed. |
| 20 | M&L for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floors including 20mm Screed bed or bedding layer of cement mortar 1:6 complete all as specified & directed. |
| 21 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 60 mm thickness with grey cement and pigment complete all as specified & directed. |
| 22 | M&L Sand filling under floors or in paver block all as specified and directed. |
| 23 | Taking up or down 15/20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by by Engr-in-charge. |
| 24 | M&L 3-layer PP-R (Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints,fixed to wall including all connections & fittings complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in repair vitreous coloured China wash basin, size 600x480mm , excluding taps,but incl waste pipe & all aceesories complete all as specified and directed by Engr-in-Charge. |
| 30 | S & F in repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest including provision of lime concrete bedding, connection to trap and flush pipe etc as in floor all as specified and directed. |
| 31 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe all as specified & directed. |
| 32 | S&F in repairs vitreous China wash down water closet pan of one piece having flushing cistern , seat cover, jet spray,pvc connection & all as specified & directed. |
| 33 | S&F in repair soap dish approximately size 160x 160x90mm fixed to plugs with chromium plated brass screws & all aceesories complete all as specified and directed by Engr-in-Charge. |
| 34 | S & F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets float and handle, and bracket all as specified & directed. |
| 35 | S&F in repair fancy type bib taps,15 mm bore cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 36 | S & F in repair stop valve15mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified & directed. |
| 37 | S&F in repair fancy type pillar taps,15 mm bore cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F in repair bevelled edge mirror 4.8 mm thick of selected quality glass fixed to wall with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge. |
| 40 | S & F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats all as specified & directed. |
| 41 | S&F in repair mild steel peg stay of 3 set for use cloth hanger fitted in door or wall with nails all as specified & directed. |
| 42 | S&F in repair Grating down 100 mm dia of PTMT 9 minimum weight 25 gm all as specified & directed. Please Enable Macros to View BoQ information |
