|
| 1 | Earth work in excavation by mechanicalmeans (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form work for :Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate |
| 4 | Centering and shuttering in cluding strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 5 | Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 |
| 6 | Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :M-15 Grade Concrete |
| 7 | Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :M-20 Grade Concrete |
| 8 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in :Cement mortar 1:6 (1 cement : 6 sand) |
| 9 | 20 mm cement plaster on the rough side of single or half brick wall of mix1:6 (1 cement : 6 sand) |
| 10 | Supplying and filling in plinth underfloors including watering ramming consolidating in layers not exceeding 20cm in depth..under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete |
| 11 | P&l Chain link mesh fencing having chain link mesh of size 75mmX75mmX8 SWG i/c strengthning with nut bolt & washer as required complete with angle from post (65X65X5) chain link mesh fixed with top & bottem cost of nut bolt,cost of painting & priming cost of CC to be paid seprately. |
| 12 | Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides..Payment to be made per metre cost of total length of barbed wire used. |
| 13 | Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 14 | Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work..crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) |
| 15 | Applying priming coats with primer of approved brand and manufacture, having low VOC..With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. |
| 16 | Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 17 | Collection and spreading of metal dust,murum and 40mm graded hard metal insub-station yard or as required asmentioned below -Metal dust |
| 18 | Collection and spreading of metal dust,murum and 40mm graded hard metal insub-station yard or as required asmentioned below Murum |
| 19 | Collection and spreading of metal dust,murum and 40mm graded hard metal insub-station yard or as required asmentioned below Metal 40 mm |
| 20 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand..all position complete. |
| 22 | Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade,. applying additional coats wherever required to achieve even shade. |
| 23 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints..With cement mortar 1:4 |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 25 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete.. Stainless steel (grade 304) wire gauze of0.5 mm dia wire and 1.4 mm aperture on both sides |
| 26 | Providing and fixing factory made UPVC white colour sliding glazed window upto1.50 m in height ..Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. |
| 27 | Clearing jungle including uprooting ofrank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 28 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) |
| 29 | 15 mm cement plaster on the rough side of single or half brick wall of mix1:6 (1 cement : 6 sand) |
| 30 | Providing and fixing CPVC gate valve with knob of approved quality.25 mm nominal bore |
| 31 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore |
| 32 | 25 mm nominal outer dia.Pipes. |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plainand brass threaded fittings..15 mm nominal outer dia Pipes. |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plainand brass threaded fittings..25 mm nominal outer dia.Pipes. Please Enable Macros to View BoQ information |
