|
| 1 | Wiring for light point / fan point/ exhaust fan point/ call bell point with 1.5mm2 FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate suitable GI box and earthing the point with 1.5mm2 FRLS PVC insulated copper conductor single core cable etc as required. |
| 2 | Group C |
| 3 | Supplying and fixing following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as reqd. |
| 4 | 5/6 amp. Switch |
| 5 | 15/16 A switch |
| 6 | 3 pin 5/6 A socket outlet |
| 7 | 6 pin 15/16 A socket outlet |
| 8 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 9 | 3 X 1.5 sq.mm |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 11 | 20 mm |
| 12 | 25 mm |
| 13 | Supplying and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc. as reqd. |
| 14 | 1 or 2 Module (75mmX75mm) |
| 15 | 3 Module (100mmX75mm) |
| 16 | 4 Module (125mmX75mm) |
| 17 | 6 Module (200mmX75mm) |
| 18 | 8 Module (125mmX75mm) |
| 19 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 20 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 21 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 22 | LED Down lighter (COB Type) (System lumen efficacy ≥105 < 120 lm/Watt ). Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector |
| 23 | 18 watt |
| 24 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge. |
| 25 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 26 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 27 | SITC of recessed/Surface mounted 4x1 LED panel ,made of CRCA housing with Prismatic Diffuser. LED Used shall be SMD type and fixture should have minimum efficacy at System level >=120 lumens/watt with Minimum system Lumens 4300lm & Max System wattage of 36W, 6KV Surge Protection , IP 20 ,Life of fixture : 50000 burning Hrs. @ L70B50 ,CCT-4000/5700K, (SDCM<=5), CRI Ra >=80, THD ≤10%, PF ≥0.95, an operating Voltage Range of 140 - 270 VAC. The product shall be of class B serviceability, Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. Job includes cutting the false ceilling of any type and making light mounting frames complete in all respect upto entire satisfaction of EIC |
| 28 | SITC of LED Surface luminaries with following system power , Available in Neutral White Color temperature (4000K/5700K ± 350K) is made of Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated by Corrosion resistant Nano coating technology. The fixture is provided with a injection moulded UV stabilized Polycarbonate Diffused Integral encapsulated high efficiency electronic driver having a Aluminium construction with rated voltage of 140-275V, power factor > 0.95, THD < 10%, IP66 protection, Inbuilt surge protection of 6 KV, has mis wiring, Over voltage, Short circuit, Reverse Polarity protection, Inbuilt surge protection of 6 KV .Luminaries has a Ingress protection of IP66 and Impact Resistance of IK08. The luminaries lumen output > 120 LPW & system efficacy of >2800 Lm , CRI of 70 . The LEDs used have a life of 50000 burning hrs Lumen maintenance as per L70. Luminaries performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, Design Registration, ROHS compliant, BIS Certification for Luminaries & Drivers |
| 29 | 24W ± 5% |
| 30 | SITC of LED Circular Highbay luminaries with system power [120W ± 5%], CCT 4000/5700K , Robust PDC Aluminum Alloy housing with uniquely designed cooling fins ensuring optimum thermal management & Superior quality Corrosion resistance Nano technology Powder coating for Premium finish and durability. UV stabilized injection molded PC Lens allows good optical light transmission. High efficiency isolated driver with necessary safety protections with external 20KV SPD. Integral encapsulated high efficiency electronic driver having a with rated voltage of 220V-240 Vac, power factor > 0.95, THD <10% @rated voltage, IP66 protection. Luminaries has a Ingress protection of IP66 and Impact Resistance of IK08. The luminaries lumen output > 150 LPW & system efficacy of >18000 Lm ,provided with 60 & 90 degree beam angles, operating in ambient temperature of 0⁰C to 50⁰C at 50Hz frequency. CRI of 70 . The LEDs used have a life of 100000 burning hrs Lumen maintenance as per L90. Suitable for Suspension mounting through eye bolt. Manufacturer shall have in-house lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Compliance to Indian Standards of IS10322 Part 5 / Sect 5:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. EMC : EN 55015,IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab .Certification: CE Certified, ROHS compliant, BIS Certification for Luminaries & Drivers. Note: Job also includes all accessories like connection cable, suspension chain etc. complete in all respect upto entire satisfaction of EIC. |
| 31 | SITC of IP 66, Surface mounted LED Downlight Luminaries with System power [min 15W ± 5%] , Available in Cool White color temperature (4000K/5700K ± 355K), made of a single piece Pressure die cast aluminium (PDC) housing for rapid thermal healing & Powder coated by Corrosion resistant Nano coating technology. The fixture is provided with a flat UV Stabilized PS diffuser profiled to have a uniform distribution. High efficiency electronic driver with rated voltage of 140-275V, Power factor > 0.95 and THD < 10%, Inbuilt surge protection of 6 KV with SPD , also has mis wiring, Over voltage & Short circuit protection. Driver is Integral type & maintenance-friendly with easy access to driver from top of the Luminaries. The system efficacy of > 120 LPW & luminaries lumen output >1800 Lm , CRI of 80. The LEDs used have a life of 50000 burning hrs & Lumen maintenance as per L70. Comes with standard warranty of 5Years. Luminaries performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: Design Registration, ROHS compliant, BIS |
| 32 | SITC of Spike mounted LED Luminaries with System power [15W ± 5%] , Available in warm White color temperature (3000K ± 355K), made of a single piece Pressure die cast aluminium (PDC) housing for rapid thermal healing & Powder coated by Corrosion resistant Nano coating technology. The fixture is provided with Heat resistance tempered glass cover with secondary PMMA Lens for effective beam angles , IP66 IP rating and IK 05 , IK rating High efficiency electronic driver with rated voltage of 140-275V, Power factor > 0.95 and THD < 10%, surge protection of 20 KV with SPD , also has mis wiring, Over voltage & Short circuit protection. Driver is Integral type & maintenance-friendly with easy access to driver from top of the Luminaries. The luminaries lumen output > 80 LPW & system efficacy of >1250 Lm , CRI of 70. The LEDs used have a life of 50000 burning hrs & Lumen maintenance as per L70. Comes with standard warranty of 5Years. Luminaries performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: Design Registration, ROHS compliant, BIS |
| 33 | SITC of Linear Wall washer Outdoor LED Luminaries with System power [30W ± 5%] , Available in warm White color temperature (3000K ± 355K), made of extruded aluminium housing for rapid thermal healing & Powder coated by Corrosion resistant Nano coating technology. The fixture is provided with Heat resistance tempered glass cover with secondary PMMA Lens for effective beam angles , IP66 IP rating and IK 05 , IK rating High efficiency electronic driver with rated voltage of 140-275V, Power factor > 0.95 and THD < 10%, surge protection of 20 KV with SPD , also has mis wiring, Over voltage & Short circuit protection. Driver is Integral type & maintenance-friendly with easy access to driver from top of the Luminaries. The luminaries lumen output > 80 LPW & system efficacy of >2400 Lm , CRI of 70. The LEDs used have a life of 50000 burning hrs & Lumen maintenance as per L70. Comes with standard warranty of 5Years. Luminaries performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: Design Registration, ROHS compliant, BIS |
| 34 | SITC of Indoor Linear LED Light with Sensor dimmable , High efficiency isolated driver with necessary safety protections , Corrosion resistance Powder coated using Nano Technology, Extruded PC diffuser for optimal light transmission & wide distribution, Extruded Aluminium alloy housing for better thermal conductivity, Lumen maintenance L70 @ 50K Hours, Photo biological Safety RG0, Electrical Insulation Class 1, IP20, Driver Placement Integral, Driver Type Constant Current, Rated I/P Voltage 220V- 240 Vac, PF >0.95, THD <10% @ rated voltage, IK 05, Operating ambient Temp 0 to 35 Degree C, Input voltage Range 140 VAC - 270 VAC, Wattage min 20W, Lumen/Watt >130 LPW,CCT 4000K/5700K,lumens >3900 The LEDs used have a life of 50000 burning hrs & Lumen maintenance as per L70. Luminaries should have standard 5 Years warranty for complete system. Manufacturer need to submit 5 Years warranty declaration on company letter head post supply. Type test Certificate and LM79 from In-House NABL accredited Lab, including Technical Data Sheet & LM80 should be submitted on request. Manufacturer emblem/logo should be embossed into the Aluminium housing to allow identification of OEM & traceability till the life of the fixture. Luminaries performance & Safety : I EC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 Certification: CE Certified, ROHS compliant, BIS Certification for Luminaries & Drivers. Note: Job includes fixing of lights with all required accessories such as Clutch wire, fasteners, connecting wires from ceiling to suspended fixture and connectors etc. upto entire satisfaction of EIC. |
| 35 | SITC of LED Suspended sensor based luminaire with dimming upto 50% with following system power , Color temperature (4000K/5700K ± 350K) is made of Pressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated by Corrosion resistant Nano coating technology. The fixture is provided with a injection moulded UV stabilized Polycarbonate Diffused Integral encapsulated high efficiency electronic driver having a Aluminium construction with rated voltage of 140-275V, power factor > 0.95, THD < 10%, Inbuilt surge protection of 6 KV, has mis wiring, Over voltage, Short circuit, Reverse Polarity protection. Luminaire has a Ingress protection of IP20 and Impact Resistance of IK08. The luminaire lumen output > 120 LPW & system efficacy of >3600 Lm , CRI of 70 . The LEDs used have a life of 50000 burning hrs Lumen maintenance as per L70. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015 IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab. Certification: CE Certified, Design Registration, ROHS compliant, BIS Certification for Luminaires & Drivers. Note: Job includes fixing of lights with all required accessories such as Clutch wire, fasteners, connecting wires from ceiling to suspended fixture and connectors etc. upto entire satisfaction of EIC. |
| 36 | Supply, Installation and testing of pre-wired IP65 Round shape Surface /wall mounted 24 watt LED Fixture. Body Made of Pressure Die Cast Aluminium Alloy Housing, System Efficacy >120 LPW or above. Ingress Protection of IP65 with CRI >80,CCT of 5700k/4000k. suitable for 220 V, 50 Hz, The luminaire rated life (L80)>75000 Hours with High efficiency driver with inbuild surge protection, over voltage protection, short circuit protection, Mis-wiring, and Reverse Polarity. Surge Protection of upto 20kV. PF>.95, THD< 5% (Driver compliance IEC62384, IEC 61547, IEC 61347-2- 13, EMI-CISPR15) Luminaire performance& Safety: IEC 60598, IS 10322-5, IS 161-03/05/06/07. Submission of LED Photo biological safety report confirming to 62471 and from LED source manufacturer & LM79 report from NABL accredited laboratory) |
| 37 | Rebate of old FTL type Light fixtures aprox. 34 nos, old D/L approx 20 nos. etc. |
| 38 | Rebate of old dismantled materials in the work of Replacement of old DBs in APC old TPN DBs (including all switch gears) 4 way single door 108 nos, Bus Bar set 20 Nos, Terminal box 20 Nos, old dismantled looping cable approx. 40 meter etc. Please Enable Macros to View BoQ information |
